Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 157 for “"Sub-critical"”.

  1. Open channel transitions with sub-critical flow

    Inlet transitions with sub-critical flow from trapezoidal to rectangular sections are studied. The water depths range from 5 to 10 feet and the bottom widths range from 5 to 12.5 feet. Graphs were constructed to design these types of transitions. The behavior of a given transition with different …

    vt Repository record for Open channel transitions with sub-critical flow (opens in a new tab)

  2. Sub-critical Growth of Cracks Under Longitudinal Shear

    … load. McClintock argued that in a ductile so lid sub-initial growth would not be possible without continued increase of load. He showed that after the crack progresses by an infinitesimal amount, the redistribution of stresses and strains lowers the strain at the crack-root and thus further load …

    sdstate Repository record for Sub-critical Growth of Cracks Under Longitudinal Shear (opens in a new tab)

  3. Monte Carlo computer simulation of sub-critical Lennard-Jones particles

    … percolation threshold. Using scaling theory, the critical exponent, Ï , is determined from the cluster distributions. Deviation from the scaling law is evaluated using a modified scaling law that includes a surface term. It is found that the surface term is unnecessary in the gas-like area of the …

    vt Repository record for Monte Carlo computer simulation of sub-critical Lennard-Jones particles (opens in a new tab)

  4. Hydrodynamic and Thermal Effects of Sub-critical Heating on Superhydrophobic Surfaces and Microchannels

    … spacing. Axial fluid conduction is found to be substantial at high Peclet numbers where it is classically neglected. The parameter regimes where prior analytical works found in the literature are valid are delineated. The experimental work is divided into two stand-alone chapters with one …

    byu Repository record for Hydrodynamic and Thermal Effects of Sub-critical Heating on Superhydrophobic Surfaces and Microchannels (opens in a new tab) Download PDF for Hydrodynamic and Thermal Effects of Sub-critical Heating on Superhydrophobic Surfaces and Microchannels (opens in a new tab)

  5. Investigation of fuel cycle for a sub-critical fusion-fission hybrid breeder reactor

    The SABR fusion-fission hybrid concept for a fast burner reactor, which combines the IFR-PRISM fast reactor technology and the ITER tokamak physics and fusion technology, is adapted for a fusion-fission hybrid reactor, designated SABrR. SABrR is a sodium-cooled 3000 MWth reactor fueled with …

    gatech Repository record for Investigation of fuel cycle for a sub-critical fusion-fission hybrid breeder reactor (opens in a new tab)

  6. Reactivity Investigations Using Periodic Neutron Source in a Source in a Sub-Critical Assembly

    A method of reactivity measurement in the far subcritical range has been presented using a lumped-parameter model of a reactor whose neutron field is excited by a sinusoidally varying source of fast neutrons. Essentially, the method consists of determining the source transfer function for the …

    aston Download PDF for Reactivity Investigations Using Periodic Neutron Source in a Source in a Sub-Critical Assembly (opens in a new tab)

  7. Understanding sub-critical water hydrolysis of proteins by mass: applications in proteomics and biorefining

    Sub-critical water (SCW) hydrolysis has previously been used in the extraction of antioxidant compounds from a variety of food wastes, in-particular those which are rich in protein. The brewing industry generates high volumes of waste. The most abundant component, brewers’ spent grain (BSG), is …

    birmingham Download PDF for Understanding sub-critical water hydrolysis of proteins by mass: applications in proteomics and biorefining (opens in a new tab)

  8. Effect of chip thickness, sub-critical bifurcations and process parameters in high-speed milling

    … to experimentally and numerically investigate of subcritical bifurcations in milling accounting for actual motion of the tool. In this work, a new approach for predicting the behavior dynamic model of a milling process is developed. Modeling of the discontinuous cutting forces takes into account …

    missouri Repository record for Effect of chip thickness, sub-critical bifurcations and process parameters in high-speed milling (opens in a new tab)

  9. Modeling and Measurement of a Neutron Generator Driven Sub-Critical Assembly Used for Isotope Production

    … model of Global Medical Isotope Systems’ (GMIS) sub-critical assembly used for isotope production. This model would provide estimates of dose calculations, radioisotope production rates, and neutron flux and energy spectrum A system model was constructed using Monte Carlo N Particle Version 6.1 …

    tamu Repository record for Modeling and Measurement of a Neutron Generator Driven Sub-Critical Assembly Used for Isotope Production (opens in a new tab)

  10. Neutron flux determination in the lower region of a natural uranium-light water sub-critical assembly

    The natural uranium-light water subcritical reactor is classified as a heterogeneous reactor. Reactors are classified according to their neutron energy or relative arrangement of fuel and generator. In a reactor classified as heterogeneous, the fuel is distributed in a fairly definite geometrical …

    ttu Repository record for Neutron flux determination in the lower region of a natural uranium-light water sub-critical assembly (opens in a new tab)

  11. A novel AlGaN/GaN based enhancement-mode high electron mobility transistor with sub-critical barrier thickness

    … transistor (HEMT) that employs an ultrathin sub-critical 3nm Al_0.25Ga_0.75N barrier layer and relies on an induced two dimensional electron gas (2DEG) for operation was designed, fabricated and characterized. The device consists of source and drain Ohmic contacts nominally overlapped by the …

    glasgow Download PDF for A novel AlGaN/GaN based enhancement-mode high electron mobility transistor with sub-critical barrier thickness (opens in a new tab)

  12. Parametric Study of 99Mo Production Using a Sub-critical Low Enriched Uranium Assembly Design Proposed by Niowave Inc.

    … production was studied for an electron beam and sub-critical LEU assembly design proposed by Niowave Inc. by applying Monte Carlo radiation transport and coupled isotope generation-depletion calculations. In addition, the production of 135Xe, 135I 131I, 239Pu, 105Ru and 105Rh were also …

    tamu Repository record for Parametric Study of 99Mo Production Using a Sub-critical Low Enriched Uranium Assembly Design Proposed by Niowave Inc. (opens in a new tab)

  13. Preparation of biodegradable polymeric scaffolds with porosity gradients and interconnected structures using a sub critical carbon dioxide foaming process

    The use of CO2 at sub-critical states and formation of porous structures with porosity gradients and interconnectivities from biodegradable polymers and their blends were investigated. Porous structures with well-defined pore sizes ranging from very large (i.e. d>100mum) to very small pores (i.e. …

    ottawa-retro Repository record for Preparation of biodegradable polymeric scaffolds with porosity gradients and interconnected structures using a sub critical carbon dioxide foaming process (opens in a new tab)

  14. Fuel Cycle Optimization of a Helium-Cooled, Sub-Critical, Fast Transmutation of Waste Reactor with a Fusion Neutron Source

    … fuel cycle scenarios for a helium-cooled, sub-critical, fast reactor with a fusion neutron source for the transmutation of spent nuclear fuel have been analyzed. The transmutation rate was set by the 3000MWth fission power output. The primary objective was to achieve greater than 90% burn …

    gatech Repository record for Fuel Cycle Optimization of a Helium-Cooled, Sub-Critical, Fast Transmutation of Waste Reactor with a Fusion Neutron Source (opens in a new tab)

  15. Sub-critical crack growth in a ceramic and a ceramic composite: Effects of monotonic loads, cyclic loads, and high temperatures

    … crack propagation, and also allow considerable sub-critical crack growth prior to failure. The sources of toughening processes are the microstructural elements in the crack wake which induce closure tractions on the crack. This experimental and theoretical study examines the sub-critical crack …

    uiuc Repository record for Sub-critical crack growth in a ceramic and a ceramic composite: Effects of monotonic loads, cyclic loads, and high temperatures (opens in a new tab)

  16. Explainable and Reduced-Feature Machine Learning Models for Shape and Drag Prediction of a Freely Moving Drop in the Sub-Critical Weber Number Regime

    … number (We) and Reynolds number (Re), in the sub-critical We regime where there is no drop breakup. The average error in radius and drag coefficient for the test cases, as low as 0.36% and 0.49%, respectively, is achieved. Most importantly, SHAP (SHapley Additive exPlanations) analysis is …

    south-carolina Repository record for Explainable and Reduced-Feature Machine Learning Models for Shape and Drag Prediction of a Freely Moving Drop in the Sub-Critical Weber Number Regime (opens in a new tab)

Page 1 of 8