Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Subassemblage"”.
-
Modeling and Behavior of the Beam/Column Joint Region of Steel Moment Resisting Frames
… on elastic deformations of individual structural subassemblages. First, formulas are derived to account for each major elastic component of drift in an individual subassemblage. The results from these derivations were implemented into a computer program named PANELS to allow for rapid calculation …
-
Behaviour of columns in sub-frames with semi-rigid joints.
The behaviour of limited subassemblages with flexible beans and semi-rigid beam to column connections was studied using a computer program in which the finite element method was employed in a non-linear analysis which accounts for the presence of semi-rigid connections and the inelastic behaviour …
-
Computational Modeling of Delayed Progressive Collapse of Reinforced Concrete Building Structures
… simulate the pushdown experiment on a RC frame subassemblage under displacement-controlled loading. The deformation and failure mechanisms are in good agreement with experimental observations. The model is then used to investigate the behavior of the subassemblage in a "static fatigue" scenario …
-
The strength of biaxially loaded beam-columns in flexibly connected steel frames.
… of a series of 10 'non-sway' steel column subassemblages, each comprising a 6m long column with up to three 1.5m long beams, together with two full-scale 3 storey, 2 bay, single span, non-sway steel frames (typical overall dimensions 9m x 10m x 3.5m). The subassemblages tests were conducted …
-
A two-scale thermomechanical computational model for reinforced concrete frame structures
… is used to simulate the behavior of a RC frame subassemblage under thermomechanical loading and the simulation results are further compared with the prediction by using the conventional finite element model. It is shown that the present model can well capture the nonlinear behavior of RC frame …
-
Achieving Operational Seismic Performance of RC Bridge Bents Retrofitted with Buckling-Restrained Braces
… retrofitted and repaired bents. Additionally, subassemblage tests were conducted in an effort to study the response of these elements and to allow for refined nonlinear characterization in the analysis of the retrofitted and repaired systems. The results of the large-scale experiments and …
-
Characterizing the Load-Deformation Behavior of Steel Deck Diaphragms using Past Test Data
… and overstrength are estimated based on subassemblage test results and Rs factors are then calculated based on these parameters. The effects of certain variables such as deck thickness and fastener spacing on diaphragm ductility are explored.
-
Optimal Panel Zone Participation in Steel Moment Frames
… A procedure to form an optimally designed frame subassemblage is proposed to maximize its inelastic deformation energy capacity. The proposed procedure is then applied to an available steel moment frame for evaluating its overall seismic performance. A new frame finite element is developed to …
-
The response of non-sway steel framed structures with semi-rigid connections.
… connection behaviour on a wide range of subassemblage configurations. A new method for the non-sway column design is developed and validated using the test and analytical results. The new approach is found to be more economical than the existing BS 5950 method but it still essentially …
-
Behavior of a six-story office building under moderate seismicity
… frames. A full-scale precast beam-column joint subassemblage is subjected to cyclic loads. Results of the experimental study show that the joint dissipates little energy and suffers modest strength and stiffness degradation under two percent drift. Inelastic dynamic analysis of the lateral load …
-
Anchorage of shear reinforcement in prestressed concrete bridge girders
… that included bar pullout tests performed on 13 subassemblage specimens which represented the bottom flanges of prestressed concrete girders in a number of configurations to determine the effectiveness of straight legged stirrup anchorage in developing yield strains. Additionally, four girder …
-
Nonlinear analysis of T-shaped concrete walls subjected to multi-directional displacements
… at the University of Minnesota's Multi-Axial Subassemblage Testing Facility. The analysis was generally capable of capturing the measured response within 5-10%. The contribution of various displacement components were examined and compared with the contributions from the OpenSees analysis. The …
-
Performance of Full-Scale Reinforced Concrete Columns Subjected to Extreme Earthquake Loading
… (RC) columns were tested at the Multi-Axial Subassemblage Testing (MAST) Laboratory of the University of Minnesota to investigate their performance under extreme seismic events that would produce near-collapse conditions. One of the goals of the tests was to investigate any potential …
-
Repair and strengthening of Pre-1970 reinforced concrete corner beam-column joints using CFRP composites
… joints. Four full-scale corner beam-column-slab subassemblages built with identical dimensions and pre-1970 reinforcement details were subjected to a reverse-cycle bidirectional displacement history consisting of alternate and simultaneous cycles in the two primary frame directions before and/or …
-
Behavior of rectangular concrete walls subjected to simulated seismic loading
… subjected to cyclic loading at the Multi-Axial Subassemblage Testing facility (MAST) at University of Minnesota. Also, a y-scale precast wall system was tested at National Center for Research on Earthquake Engineering (NCREE), Taiwan to validate PreWEC system concept.</p> <p>Overall dimensions …
-
Refinement of the Inverted T-Beam Bridge System for Virginia
The inverted T-beam bridge system is a bridge construction technique that follows accelerated bridge construction processes. The system was discovered in France and first adopted in the U.S. by the Minnesota Department of Transportation. In 2012 the system was modified and adopted by Virginia, with …