Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 87 for “"Substrate bias"”.
-
The effect of substrate bias on sputtered hydrogenated amorphous silicon
Thesis (Ph. D.)--Michigan State University. Department of Electrical Engineering and Systems Science, 1983
-
Deposition of tantalum thin films by RF sputtering with substrate bias
… of RF sputtered tantalum thin films on different substrates, particularly aluminum and silicon, have been studied. The effect of substrate biasing on ion current and film thickness has been investigated. The study included comparison between substrate ion current of DC sputtering and RF sputtering …
-
The Growth of Copper - Chromium Metastable Alloys by Bias Sputtering: Effect of Substrate Bias and Alloy Composition on Solubility and Morphology
… alloys have been successfully grown by bias rf sputtering. The effect of substrate bias and film composition on the early stages of film growth, on the film microstructure and morphology, and on the phase transformation process of the metastable films were studied using (S)TEM, SEM, AES, …
-
<em>Materials Integration and Device Fabrication of Active Matrix Thin Film Transistor Arrays for Intracellular Gene Delivery</em>
… In addition to the composition, the effect of substrate bias and temperature was investigated. The electrical resistivity of MoW samples deposited at room temperature with zero bias followed the typical Nordheim’s rule as a function of composition. The resistivity of samples deposited with …
-
Characterization of hot carrier reliability in deep submicronmeter MOSFETs
… under hot carrier injection and enhanced by substrate bias, is studied. The manipulation of high-energy tail electrons (HETEs) via substrate bias is used as a scientific tool to probe the fundamental mechanisms governing the interface and oxide degradation. New experimental evidence provides …
-
Class F And Inverse Class F Power Amplifier Subject To Electrical Stress Effect
… designed and optimized for a good sensitivity. A substrate bias circuit was implemented to achieve a good sensitivity. Recommendations were made for future advancements for modification and optimization of the class F and inverse class F circuit by the application of other stress reduction …
-
Stoichiometry control mechanisms of bias sputtered zinc oxide films
… achieved using a subsidiary rf discharge at the substrate and a reactive gas baffle surrounding the target. The reactive gas baffle was shown to enhance film oxidation by decreasing the metal flux to the substrate and increasing the oxygen partial pressure near the substrate. Rutherford …
-
Structure, Mechanical and Tribological Properties of Hydrogen-free Amorphous Carbon Films Deposited by Dual-Frequency Mode Pulsed-DC Magnetron Sputtering
… pulsing both the sputtering target and the substrate at significant different frequencies (dual frequency DC-pulsed magnetron sputtering) provides more advantages and flexibility of controlling the film microstructure. Therefore, the aim of this PhD thesis is to investigate the effect of …
-
Disubstituted Epoxide Transformations: Catalyst Design, Mechanistic Studies, and Method Development
… take advantage of intrinsic steric or electronic substrate bias to influence the site of nucleophilic attack. Therefore, the scope of these systems is frequently quite limited. Herein, we report two classes of epoxide carbonylation catalysts, which preferentially enhance or overcome substrate …
-
Microstructure and properties of transition metal nitride and medium entropy alloy coatings
… and elastic modulus. Further, the effect of substrate bias on the TiAlSiN coatings deposited at ~ 500°C was investigated. Variations in substrate bias had little impact on the chemical concentration of the coatings, but significantly influenced the microstructure, phase composition and …
-
Low bandgap α-(Si,Ge):H and α-(Ge):H devices
… be enhanced by the low pressure, inert gas and substrate bias. The conclusion that low pressure leads to better quality of the material under hydrogen plasma because of higher ion bombardment is further verified by the space charge limited current (SCLC) method. The midgap defect density of …
-
Carbon nitride deposition by magnetron sputtering: structural, mechanical, electrical and optical properties
… electric field, provides a high ion flux at the substrate, which results in high deposition rates (up to 3fim/h) and increased nitrogen incorporation in the films (up to 45 at.% N). The effect of deposition parameters, such as nitrogen partial pressure (Npp), substrate bias, and deposition …
-
Analytical Electron Microscopy of Interfaces in Cathodic Arc Coatings
… work was to study the effects of changing the substrate bias and orientation on arc evaporated nitride coatings. The microstructure and microchemistry of the coatings were investigated with emphasis placed on study of the coating/substrate interface region which governs the adhesion of the …
-
Optical multilayers with diamond-like thin films
… as a function of argon sputter gas pressure, substrate bias and reactive gas partial pressure (H₂, O₂, and N₂). The films were characterized by spectroscopic ellipsometry, scanning and transmission microscopy, electron diffraction, resistivity and hardness measurements, along with infrared …
-
Plasma Wall Interactions and Recombination Coefficients Measurement on Yttrium-based Coated Chamber Wall Surfaces
… plasma pretreatment was briefly operated with substrate bias, generating SiClx etching products that rapidly remove F from the liner surface. When O2 flow was extinguished, etching continued with much less changes in Cl and SiClx relative number densities. x Heterogeneous loss coefficient were …
-
A study of surface roughness issues in magnetic tunnel junctions
… bottom electrode is controlled by applying an rf substrate bias during the deposition. Magnetic tunnel junction elements are fabricated by using shadow mask technique. Experimental results show that the barrier properties and the performance of the magnetic tunnel junction elements depend on the …
-
ECR plasma analysis: correlation between plasma conditions and growth rate
… the effect of microwave power, pressure, substrate bias and H2/He dilution on plasma composition. UV/VIS/NIR photospectroscopy is used to measure film thickness and to calculate film growth rate. We find a good correlation between amorphous silicon growth rate and SiH emission …
-
Characterization of inconel/carbon multilayer mirrors for 45 Å wavelength
… measured as a function of argon pressure and substrate bias voltage using X-ray Photoelectron Spectroscopy (XPS), X-ray Diffraction (XRD), Grazing X-ray Reflectometry (GXR), and Spectroscopic Ellipsometry (SE). Multilayers grown at a low pressure and a moderate substrate bias (—40 to —80 V) …
Page 1 of 5