Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 286 for “"Substrate material"”.

  1. Effect of substrate material and roughness on the properties of Mg AZ31-B alloy cast on horizontal single belt casting simulator

    … strips was investigated for different types of substrates: smooth low carbon steel substrate, copper with six different roughnesses, graphite-coated smooth steel and graphite-coated copper with different roughnesses. Moreover, the effect of strip thickness on the casting properties were …

    concordia Download PDF for Effect of substrate material and roughness on the properties of Mg AZ31-B alloy cast on horizontal single belt casting simulator (opens in a new tab)

  2. Laser Ablation of Paint from 2024-T3 Alclad Aluminum - Numerical Simulation and Experimental Characterization

    Removal of paint from substrate material through laser ablation is a very promising and environmentally safe process as compared to chemical stripping and other processes. Potential thermomechanical damage of substrate material subjected to laser paint removal process plays a vital role in deciding …

    carleton Repository record for Laser Ablation of Paint from 2024-T3 Alclad Aluminum - Numerical Simulation and Experimental Characterization (opens in a new tab)

  3. Quasi-Static, Cyclic, and Fracture Characteristics of Plasma Transferred Wire Arc (PTWA) Thermal Sprayed AlSi Cylinder Bores

    … from the thermal mismatch between coating and substrate materials. In terms of mechanical properties, coating hardness was estimated at both the micro- and nanoscale and examined the influence of microstructure inhomogeneity on the mechanical performance and failure modes. The PTWA coating of …

    waterloo Repository record for Quasi-Static, Cyclic, and Fracture Characteristics of Plasma Transferred Wire Arc (PTWA) Thermal Sprayed AlSi Cylinder Bores (opens in a new tab)

  4. Conductive anodic filament reliability of fine-pitch through-vias in organic packaging substrates

    … in thin glass fiber reinforced organic packaging substrates with advanced epoxy-based and cyclo-olefin polymer resin systems. Reliability studies were conducted in halogenated and halogen-free substrates with improved test structure designs including different conductor spacing and geometry. …

    gatech Repository record for Conductive anodic filament reliability of fine-pitch through-vias in organic packaging substrates (opens in a new tab)

  5. Characteristic influence of thermo-mechanical stresses leading to premature failure of compressor turbine blades of short-haul aircraft fleet

    … (EDS-SEM) on the protective coating and the substrate material. Mechanical testing was ultimately executed to ascertain the micro hardness and residual strength at time of retire from service. The modeling results revealed that the tip of the CT blade had been rigorously attacked by exposure …

    botswana Repository record for Characteristic influence of thermo-mechanical stresses leading to premature failure of compressor turbine blades of short-haul aircraft fleet (opens in a new tab)

  6. Design and performance of all-polymer acoustic sensors

    … PVDF offers unique opportunities as a substrate material due to its low stiffness, low cost, low density, and ease of preparation compared with many other piezoelectric materials commonly used in acoustic sensing applications. Substrates are prepared using a variety of material …

    ubc Repository record for Design and performance of all-polymer acoustic sensors (opens in a new tab) Download PDF for Design and performance of all-polymer acoustic sensors (opens in a new tab)

  7. CVD Growth of SiC on Novel Si Substrates

    Silicon Carbide has been a semiconductor material of interest as a high power and temperature replacement for Silicon (Si) in harsh environments due to the higher thermal conductivity and chemical stability of SiC. The cost, however, to produce this material is quite high. There are also defects in …

    usf Repository record for CVD Growth of SiC on Novel Si Substrates (opens in a new tab)

  8. Analysis of the effect of bending, fatigue, erosion-corrosion and tensile stresses on HVOF coating of metallic surfaces

    … that the presence of weld or having a composite substrate formed by two different materials does affect the residual stresses at the interface, as it lowers bending, tensile, fatigue strength and enhancing corrosion effect, as observed by the analytical and experimental analyses carried out in …

    dcu Download PDF for Analysis of the effect of bending, fatigue, erosion-corrosion and tensile stresses on HVOF coating of metallic surfaces (opens in a new tab)

  9. Πειραματική μελέτη τεχνητών υγροβιοτόπων επιφανειακής ροής με χρήση πιλοτικών μονάδων

    … hydraulic residence time (HRT), vegetation type, substrate material and wetland shape on the performance of free-water surface (FWS) constructed wetlands treating wastewater, 5 pilot- scale units were constructed and operated continuously from December 2004 until March 2007 in parallel …

    greece Repository record for Πειραματική μελέτη τεχνητών υγροβιοτόπων επιφανειακής ροής με χρήση πιλοτικών μονάδων (opens in a new tab)

  10. Bioinspired & biocompatible coatings of poly(butylene adipate-co-terephthalate) and layer double hydroxide composites for corrosion resistance

    … in high strength and toughness of the natural material. In this study we mimic the design of layered bone microstructure and fabricate an optimal multifunctional bio-nanocomposite having strength, toughness and corrosion resistance. Poly (butylene adipate-co-terephthalate) (PBAT), a …

    unt Repository record for Bioinspired & biocompatible coatings of poly(butylene adipate-co-terephthalate) and layer double hydroxide composites for corrosion resistance (opens in a new tab)

  11. Modelling of residual stresses of the laser cladding process

    … predict residual stresses in dissimilar clad and substrate materials. H13 steel and Ti6Al4V were used as substrate material. Four cladding materials (Al2O3, TiC, TiO2 and ZrO2) were used on the H13 steel substrate and a range of preheating temperature of the substrate, from 300 K to 1200 K, was …

    city-london Download PDF for Modelling of residual stresses of the laser cladding process (opens in a new tab)

  12. Ultra-High-Resolution Patterning And Pattern Transfer Via Nanocrystal Colloidal Lithography

    The ability to design, pattern, and process materials at the nanoscale has enabled vast research opportunities ranging from fundamental science to technological applications and device integration. The continued development of nanoscience and nanotechnology relies on pushing the limits of nanoscale …

    penn Repository record for Ultra-High-Resolution Patterning And Pattern Transfer Via Nanocrystal Colloidal Lithography (opens in a new tab)

  13. Reentrainment of Submicron Solid Particles

    … of particle size, flow rate, pulsation, particle/substrate material, and temperature on the short-term reentrainment of submicron particles. The particles tested are in the size range of 10-900 nm and are deposited by wetting the inside of capillary tubes with a liquid suspension. The tubes are …

    vcu Repository record for Reentrainment of Submicron Solid Particles (opens in a new tab)

  14. Product-market opportunities for FPL spaceboard II molded structural products

    … most important to purchase decisions regarding substrate materials for the office furniture industry - the most likely target for introduction of Spaceboard II. A matrix-type decision model was then developed and illustrated which assists in selecting the most attractive product-market …

    vt Repository record for Product-market opportunities for FPL spaceboard II molded structural products (opens in a new tab)

  15. Nanostructuring of ultra-thin films on polymeric substrates

    … pursuit of a fundamental understanding of the substrate/deposited material interaction. This PhD project was posed around understanding the seeding and growth of UTFs and their nanostructures on compliant polymeric substrates. Owing to the compliance of the substrate, a portion of the energy of …

    adelaide Repository record for Nanostructuring of ultra-thin films on polymeric substrates (opens in a new tab)

  16. Modulation and Manipulation of Transition Metal Dichalcogenides

    … two-dimensional variants. However, by exploiting substrate – material interactions we have developed novel strategies to control the morphology of TMD materials. Herein we demonstrate the ability to selectively tune substrate – material interactions to produce a further confinement in the growth …

    jhu Repository record for Modulation and Manipulation of Transition Metal Dichalcogenides (opens in a new tab)

  17. Myoglobin Detection on SiC: Immunosensor Development for Myocardial Infarction

    … around for more than 100 years as an industrial material and has found wide and varied applications because of its unique electrical and thermal properties. In recent years there has been increased attention on SiC as a viable material for biomedical applications. Among these applications are …

    usf Repository record for Myoglobin Detection on SiC: Immunosensor Development for Myocardial Infarction (opens in a new tab)

  18. Surface Acoustic Wave (SAW)-Based Gas Flow Sensor

    … of a SAW delay line fabricated on a suitable substrate and a thin film heater to heat the SAW device to a suitable temperature above the ambient. The delay line is connected in the feedback loop of an rf-amplifier resulting in a delay line stabilized SAW oscillator. When gas flows over the SAW …

    marquette Repository record for Surface Acoustic Wave (SAW)-Based Gas Flow Sensor (opens in a new tab)

  19. Effect of PWHT and filler metal on stress relaxation cracking susceptibility in 347H stainless steel welds for elevated temperature service

    … during service. Welding experiments on 347H SS substrates, using GTAW and SMAW, were completed to duplicate the susceptible microstructure for crack susceptibility testing using E347 and E16.8.2 weld consumables. Finite element modeling (FEM) was performed to reveal residual stress profiles. …

    colo-mines Repository record for Effect of PWHT and filler metal on stress relaxation cracking susceptibility in 347H stainless steel welds for elevated temperature service (opens in a new tab)

Page 1 of 15