Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 69 for “"Subsurface Damage"”.
-
PREDICTION OF SUBSURFACE DAMAGE DURING MACHINING NICKEL-BASED SUPERALLOYS
… fatigue-resistance and fracture toughness. Subsurface damage is typically generated during the machining of these materials, and in particular, ã'-strengthened nickel-based superalloys. The depth of the subsurface damage is a critical requirement specified by the customer. Therefore, it is …
-
Investigation of infrared thermography for subsurface damage detection of concrete structures
… affecting the utilization of IRT in regards to subsurface damage detection in concrete structures, specifically when the IRT is utilized for high-speed bridge deck inspections at normal driving speeds under field laboratory conditions. The results show that IRT can detect up to 2.54 cm …
-
Deep learning-based surface and subsurface damage identification using computer vision and thermography
The early detection of both surface and subsurface damage is crucial for ensuring structural integrity. Timely repair of damage also delays the need for infrastructure replacement, which involves significant costs and has adverse environmental impacts. While manual inspection for damage detection …
-
Deep learning- and infrared thermography-based subsurface damage detection in a steel bridge
… deep-learning-based method is proposed to detect subsurface damage in the steel elements of a bridge using thermography, without physical contact. Thermal images of the structural steel elements on the Arlington Bridge in Winnipeg, Manitoba, were captured using an uncooled microbolometer and were …
-
Modeling of environmental effects on thermal detection of subsurface damage for concrete bridges
… numerical model to predict thermal contrasts for subsurface delaminations based on a given set of environmental conditions. The finite element method (FEM) was used to perform 3-D, transient heat transfer analysis of a concrete block with voids intended to provide an idealized model of …
-
Fundamental investigations of surface and subsurface damage, and wear in diamond wire sawing of silicon
… be engineered to produce favorable surface and subsurface properties, which would reduce processing time and resources in addition to enhancing the mechanical strength of the substrate. Moreover, cutting multi-crystalline silicon by DWS has known limitations of higher wire consumption. …
-
Surface and subsurface damage quantification using multi-device robotics-based sensor system and other non-destructive testing techniques
… Officials (AASHTO) guideline-based damage assessment technique, and 3) Patent-pending multi-device robotics-based sensor data acquisition system for mapping and assessing defects in civil structures. To detect and quantify subsurface defects such as voids and delamination using a UAV …
-
Material removal and subsurface damage studies in single point scratch tests and abrasive machining of alumina and silicon nitride
The subsurface damage and material removal in single point, unidirectional scratch tests on alumina and silicon nitride in the dry and lubricated conditions were studied. The scratch tests were done with a diamond pyramidal indenter sliding at a speed of 4.2 mm/s and the lubricants used were …
-
3-D finite element modeling of sequential oblique cutting of unidirectional carbon fiber reinforced polymer
… on the chip formation, cutting forces, and subsurface damage are simulated and analyzed. It is found that the out-of-plane force and the depth of subsurface damage increase with the oblique angle in all fiber orientation angles except 0°. To represent the nature of sequential cutting, a …
-
Environmental effects on subsurface defect detection in concrete structures using infrared thermography
… application of infrared thermography to detect subsurface damage in concrete has the potential to image delaminations from a distance, such that direct access to the surface of the concrete is not required. Thermographic imaging relies on certain environmental conditions to create thermal …
-
3D finite element model for predicting cutting forces in machining unidirectional carbon fiber reinforced polymer (CFRP) composites
… Problems such as fiber-matrix debonding, subsurface damage, rapid tool wear, matrix cracking, fiber pull-out, and delamination are usually expected to occur in machining CFRPs. These problems can affect the dimensional accuracy and performance of the CFRP part in its future application. To …
-
Rotary ultrasonic machining of ceramics: Characterization and extensions
… removal rate while maintaining the surface/subsurface damage to the machined parts at an acceptable level. Rotary Ultrasonic Machining (RUM), a hybrid machining process combining the material removal mechanisms of diamond grinding and ultrasonic machining, has the potential to do so.
-
Effect of Compression, Impact and Slipping on Rolling Contact Fatigue and Subsurface Microstructural Damage
… investigated first to evaluate their surface and subsurface damage features and to estimate the parameter testing levels. A new test rig that can apply impact loading in combination with compression and slipping was designed. Two contact discs made from bearing material (AISI 52100 steel) were …
-
Development of an enhanced microstructure–level machining model for carbon nanotube reinforced polymer composites using cohesive zone interface
… the effect of interfacial strength on surface/subsurface damage of CNT–PVA composites. Subsurface damage is reduced when interfacial strength increases. However, very high interfacial strength or perfect interfacial bonding can result in more surface/subsurface damage because CNTs can bend …
-
Nondestructive Evaluation Of Thermal Barrier Coatings With Thermal Wave Imaging And Photostimulated Luminescence Spectroscopy
… for initiation and progression of subcritical-subsurface damage as a function of thermal cycling. TWI and thermal response amplitude were correlated to the microstructural characteristics and damage progression of TBCs based on phenomenological expressions of thermal diffusion. The TBC …
-
MICROMACHINING OF BRITTLE MATERIALS WITH SOLID COATINGS
… formation on machined surfaces and minimize subsurface damage. This was attributed to a beneficial stress acting back through the shear plane and into the work material during cutting to increase the ductile mode cutting energy as demonstrated in an analytical model that captured theoretical …
-
Identification of and Effects on the Depth of the Machining Affected Zone in Nickel-Based Superalloys
The formation of subsurface damage during machining of nickel-based superalloys is a critical quality concern for the manufacture of gas turbine components. The identification and understanding of this zone are critical to the reduction of destructive testing and scrap costs in an ever changing …
Page 1 of 4