Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 66 for “"Superplasticity"”.
-
Superplasticity in the cadmium-lead system
… curves in which stage II, the region of maximum superplasticity, was of prime interest. The investigation included analysis of: creep and tensile test data, surface deformation markings, activation energy tests and Instron inferences of a "backstress". The rate controlling and prime …
-
Superplasticity in an aluminum-zinc alloy
Recent investigations have demonstrated remarkable ductility in a 20 weight per cent Aluminum - 80 weight per cent Zinc alloy. An understanding of the mechanisms responsible for this superplastic behavior could have important applications in other commercial alloy systems. This investigation …
-
Ionic mobility and superplasticity in ceramics
Superplasticity and superionic conductivity (SIC), both thermally activated processes, have been independently observed in certain materials with a high diffusion coefficient in high temperature ranges. Intuitively, this observation leads one to the idea that both types of behavior may be …
-
Processing of Aluminum alloy 2090 for superplasticity
… a refined microstructure capable of supporting superplasticity at lower temperatures in Al 2090.
-
Superplasticity and creep behaviour in pure zirconia
… temperature increase, showed the occurrence of superplasticity at temperatures near the monoclinic to tetragonal phase transformation. An interesting phenomenon was observed in a temporary halt to the creep process which occurred with continuing temperature increase beyond the phase …
-
Superplasticity in a dilute zinc aluminum alloy
… grain size and temperature the phenomenon of superplasticity may be observed. The analysis and experimental conditions were based on established procedures which have been applied to known superplastic alloys. However the continually decreasing strain rate and grain growth during testing …
-
Thermomechanical processing of aluminum alloy 2090 for superplasticity
… variables on the microstructural development and superplasticity of aluminum alloy 2090, a high strength Aluminum-Copper-Lithium-Zirconium alloy of reduced density in comparison to other A1-based materials, was investigated. Following previous research, warm rolling was conducted to strains, up to …
-
Processing, microstructure and superplasticity in Al-Mg-Mn alloys
A thermomechanical processing (TMP) schedule developed in previous work was modified to provide for an increasing strain and strain rate with each polling pass. three alloys, Al-10mg, Al-10mg-0.2Mn, and AL-10mg-0.5mn (compositions in wt. pct.), were processed utilizing this schedule. Samples were …
-
Superplasticity in the zinc-1 per cent aluminum system
A Zn - 1 wt % Al alloy has been studied in an attempt to relate tensile data and metallographic observations to assumed modes of superplastic deformation. Tensile testing, was carried out at a constant crosshead speed to determine the stress versus strain rate relationships as a function of grain …
-
Superplasticity and anelasticity in fine-grained Sn-Pb alloys
<p>Mechanisms which may play a role in superplastic deformation (grain strain mechanisms, grain boundary sliding (GBS) mechanisms) are reviewed. Two well-known lattice dislocation mechanisms are re-evaluated for grain boundary dislocations (GBDs). The manner in which the deformation mechanisms …
-
Analysis of grain refinement and superplasticity in aluminum-magnesium alloys
Previous research had demonstrated superplastic behavior in aluminum-magnesium alloys of high magnesium content to result from deformation processing to an initially non-recrystallized condition. Analysis here of those data has demonstrated that such a result may be understood in terms of …
-
Accumulative roll bonding of AA 5083 toward low temperature superplasticity
… that are conducive for low temperature superplasticity. ARB consists of roll-bonding two sheets together. If a single 50 % rolling reduction is employed, the resultant sheet is twice as long and half as thick; the sheet can be sectioned in half and the process repeated multiple times to …
-
Thermomechanical processing of aluminum alloy 2519 for grain refinement and superplasticity
Thermomechanical processing (TMP) methods developed for Al-MG and Al-Mg-Li alloys have been modified and applied to the commercial 2519 Al-Cu alloy. The TMP included initial overaging and was designed to facilitate particle-stimulated nucleation (PSN) of recrystallization during controlled …
-
A study of superplasticity in Ti-6Al-4V: characterisation, modelling and applications
<p>Superplasticity is vital in many industries - medical, defense, aerospace, transport and sports amongst others -- for the fabrication of metallic components of complex geometry. The inherent peculiarity of the effect has kept theorists fascinated for many years. But significant controversy …
-
Correlation of processing, microstructure, and superplasticity in an Al-MG-ZR alloy
Investigation of the influence of the strain history during thermomechanical processing of an Al-10Mg-0.1Zr was conducted. Refined, recrystallized microstructures resulted when larger strains were employed in the later passes of the TMP. Superplastic responses up to approximately 420 percent were …
Page 1 of 4