Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Superstrate configuration"”.
-
Molybdenum Nitride Films in the Back Contact Structure of Flexible Substrate CdTe Solar Cells
CdTe solar cells in the superstrate configuration have achieved record efficiencies of 16% but those in the substrate configuration have reached efficiencies of only 7.8%. A major reason for the lower efficiency of substrate CdTe solar cells is the poor back contact. In this work, CdTe solar cells …
-
CdTe/CdS Thin Film Solar Cells Fabricated on Flexible Substrates
… The typical CdTe thin film solar cell is of the superstrate configuration where a window layer (CdS), the absorber (CdTe) and a back contact are deposited onto glass coated with a transparent electrode. Substrate CdTe solar cells where the above listed films are deposited in reverse are not …
-
Effects of contact-based non-uniformities in cadmium sulfide/cadmium telluride thin-film solar cells
… circuit modeling software. Because of their superstrate configuration, CdTe cells feature front contacts made from transparent-conducting oxides (TCOs). Fluorine-doped tin oxide (F:SnO2) is a common choice because of its availability and acceptable optical and electrical properties. When the …
-
Optical simulation of complex nanostructured solar cells with a reduced basis method
… is of particular interest for solar cells in superstrate configuration where the absorber is illuminated through a glass substrate. The developed methods are employed in application examples taken from collaborations with experimentalists active in the joint lab “BerOSE” (Berlin Joint Lab for …
-
Fabrication of high-efficiency all-inorganic antimony chalcogenide solar cells via architecture modification
… The all-inorganic Sb2(S,Se)3 solar cell with a configuration of FTO/CdS/Sb2(S,Se)3/MnS/Au reached a PCE of 9.67%, superior stability at significantly reduced cost. Secondly, ITO thin films are used as the rear electrode replacing Au to create a bifacial and semitransparent Sb2(S,Se)3 solar cell …
-
Cadmium Zinc Telluride Solar Cells by Close Spaced Sublimation
Cadmium Zinc Telluride (CdxZn1-xTe or CZT) is a ternary semiconductor with a tunable bandgap of 1.44-2.26 eV. Solar cells with efficiencies of 20% or higher can be achieved by using a tandem solar cell structure which consists of a top cell and a bottom cell connected in series. In this kind of a …
-
Metal oxides as buffer layers in polycrystalline CdTe thin-film solar cells
… to light-facing side of the absorber in a superstrate configuration. The optical and electrical properties of MgxZn1-xO emitters can be modulated by varying the elemental ratio of x = Mg:(Mg + Zn) in the ternary alloy. Tracing the variation of the conversion efficiency as a function of Mg …
-
SI3N4/SIO2 ARRAYED WAVEGUIDE GRATINGS AND PEROVSKITE BASED SOLAR CELLS
… bandgap from 1.59 to 1.50 eV is proposed. A superstrate configuration with an inverted planar structure is adopted. The structure of our FAxMA(1-x)PbI3 perovskite solar cell is FTO glass/PTAA with m-MTDATA/Perovskite/PCBM/Ag. Sequential PTAA doping and solvent-assisted annealing techniques …
-
Development and application of novel thermomechanical cleave technique for CDTE solar cells
… Because CdTe is stan- dardly grown in the superstrate configuration, however, the front interface is buried under microns of material and difficult to access. Moreover, the high temperatures and harsh chemical environments used during CdTe growth can cause substantial changes to the front …
-
Zinc oxide TCOs (Transparent Conductive Oxides) and polycrystalline silicon thin-films for photovoltaic applications
… EVA cells are fabricated in both substrate and superstrate configuration. Special attention is paid to improving the Voc of the solar cells. For this purpose, after the SPC process, the samples receive the two post-crystallization treatments: (i) a rapid thermal anneal (RTA), and (ii) a plasma …
-
Absorber and Window Study – CdSexTe1-x/CdTe Thin Film Solar Cells
… thin film CdTe solar cells have been of the superstrate configuration with CdS (Eg-2.42eV) as the n-type heterojunction partner. Due to the relatively narrow bandgap of CdS, a wider bandgap n-type window layer has recently emerged as a promising substitute: alloys of MgyZn1-yO have been …