Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 607 for “"Support Structures"”.

  1. Optimization of support structures for selective laser melting.

    … of need is the automatic generation of optimized support structures based upon the scan patterns used to produce those structures. This research seeks to develop support structure generation tools based on real scan pattern and thermo-mechanical simulation tools for Selective Laser Melting (SLM) …

    louisville Repository record for Optimization of support structures for selective laser melting. (opens in a new tab)

  2. Development of catalyst support structures for hydrogen applications

    … source material for the preparation of catalyst support nanostructures. AAO represents a hexagonally distributed pore structure with parallel arranged pore channels. The oxide layer formed during the anodization of aluminium (Al) has increased hardness, thermal conductivity, and corrosion …

    nwu-za Repository record for Development of catalyst support structures for hydrogen applications (opens in a new tab)

  3. Fatigue load monitoring of offshore wind turbine support structures

    … targets set by the European Union have been supported by legislation and economic incentives, and have resulted in a sharp increase in installed wind power capacity in particular. Wind power is seen as a particularly attractive source of renewable energy capacity in the UK due to favourable …

    strathclyde Repository record for Fatigue load monitoring of offshore wind turbine support structures (opens in a new tab)

  4. Reliability-based optimization of floating wind turbine support structures

    … design optimization of floating wind turbine support structures, taking target safety levels and failure mechanisms from existing standards into account and applying them in such novel concepts. To achieve this, reliability methods applied in the offshore and marine renewable energy industry …

    strathclyde Repository record for Reliability-based optimization of floating wind turbine support structures (opens in a new tab)

  5. Reliability-Based Fatigue Assessment of Mast-Arm Sign Support Structures

    … tube-to-transverse plate connections within sign support structures. Review of the literature has indicated that a considerable amount of research has been devoted to identifying the structural response characteristics of these signs. Others have tried to identify how these connections may be …

    marquette Repository record for Reliability-Based Fatigue Assessment of Mast-Arm Sign Support Structures (opens in a new tab)

  6. Mitigating Wind-Induced Fatigue in Steel Traffic Signal Support Structures

    Traffic signal structures undergo wind-induced vibrations that result in fatigue damage accumulation and reduced service life. Mast arms have failed and required removal while in service. A dual experimental and analytical modeling approach is taken to mitigate fatigue and fracture in steel traffic …

    tamu Repository record for Mitigating Wind-Induced Fatigue in Steel Traffic Signal Support Structures (opens in a new tab)

  7. Distortion mitigation in hybrid additive manufacturing utilizing sacrificial support structures

    … study, use of a new approach to sacrificial supports for additive manufacturing was investigated to mitigate transient thermal induced distortion of thin substrates in a powder based directed energy deposition process utilizing a five-axis hybrid machine tool. In the study, sacrificial …

    gatech Repository record for Distortion mitigation in hybrid additive manufacturing utilizing sacrificial support structures (opens in a new tab)

  8. Experimental and analytical study of galloping forces on support structures

    … the design of the transmission lines and the structures supporting the lines have been primarily based on static loads with a conservative safety factor. The project seeks to improve the design by determining realistic forces for dynamic forces due to galloping. Therefore, a base-excitation …

    iastate Repository record for Experimental and analytical study of galloping forces on support structures (opens in a new tab)

  9. Cost analysis of offshore wind turbine support structures : monopile and jacket

    Wind turbine support structures account for around a quarter of the total capital expenditure of an offshore wind farm. If a reduction of the total investment is sought in order to promote offshore wind in the future, it is vital to understand how the different driving factors affect the design and …

    strathclyde Repository record for Cost analysis of offshore wind turbine support structures : monopile and jacket (opens in a new tab)

  10. Impact of tidal turbine support structures on realizable turbine farm power

    … thesis discusses the importance of tidal turbine support structures through analytical and computational modelling. A head-driven analytical channel model was first developed to determine the sensitivity of the flow to the presence and type of support structures. It showed that there was a …

    oxford Repository record for Impact of tidal turbine support structures on realizable turbine farm power (opens in a new tab)

  11. Real-Time Health Monitoring System for Mast-Arm Sign Support Structures

    … study conducted by Marquette University and supported by the Wisconsin Highway Research Program that is seeking to understand the risk of fatigue-induced fracture in the connections of mast-arm sign support structures. This study has been brought on by recent problems encountered with the …

    marquette Repository record for Real-Time Health Monitoring System for Mast-Arm Sign Support Structures (opens in a new tab)

  12. Implementation of Sacrificial Support Structures for Hybrid Manufacturing of Thin Walls

    … to solve this problem by integrating sacrificial support structures to additively produced thin walls to increase their stiffness during machining. The supports are machined away while machining the thin wall itself. The angle, spacing, and height of these supports are varied in several …

    gatech Repository record for Implementation of Sacrificial Support Structures for Hybrid Manufacturing of Thin Walls (opens in a new tab)

  13. Vulnerability assessment of sign-support structures during transportation and in service

    … it is critical to ensure that the truss structures that hold them can resist not only extreme loading events, but also fatigue induced by service loads. For this purpose, a comprehensive study has been conducted on the fatigue performance of this important category of structures. The …

    iastate Repository record for Vulnerability assessment of sign-support structures during transportation and in service (opens in a new tab)

  14. Reliability-constrained design optimisation of extra-large offshore wind turbine support structures

    … framework for offshore wind turbine (OWT) support structures is developed, applied, and documented for the first time. First, a parametric finite element analysis (FEA) model of OWT support structures is developed,considering stochastic material properties and environmental loads. The …

    strathclyde Repository record for Reliability-constrained design optimisation of extra-large offshore wind turbine support structures (opens in a new tab)

  15. Design of Highway Overhead Cantilever-Type Sign Support Structures for Fatigue Loads

    … (AASHTO) Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals has been revised in its entirety through a major research project conducted under the auspices of the National Cooperative Highway Research Program (NCHRP 17-10). A major part of the …

    uab Repository record for Design of Highway Overhead Cantilever-Type Sign Support Structures for Fatigue Loads (opens in a new tab)

  16. Investigation of heat transfer associated with support structures in large glass walls

    … transfer characteristics of window glass panes, supported by mullion structures, are considered. Windows usually consist of approximately 85% glass and 15% supporting structures by area. However, because supporting structures may have high thermal conductivities, they may strongly influence the …

    rice Repository record for Investigation of heat transfer associated with support structures in large glass walls (opens in a new tab)

  17. Experimental Study of Scour around Support Structures of Model Marine Hydrokinetic Devices

    … presented to explore scour due to flows around support structures of model marine hydrokinetic (MHK) devices. Three related studies were performed to understand how submergence, scour condition, and the presence of an MHK device impact scour around the support structure (cylinder). The first …

    bucknell Repository record for Experimental Study of Scour around Support Structures of Model Marine Hydrokinetic Devices (opens in a new tab)

  18. KNIT TOGETHER: CRAFTING SOFT SUPPORT STRUCTURES WITH YARN, PAIN, STICKS, AND STORIES

    This thesis is an exploration of how knitters with disabilities connect with one another through a shared project, and how the reciprocal effects of chronic illness and creativity inform the ways that knitters move with their materials throughout the project. Using queer theory and cripistemology …

    hawaii Repository record for KNIT TOGETHER: CRAFTING SOFT SUPPORT STRUCTURES WITH YARN, PAIN, STICKS, AND STORIES (opens in a new tab)

  19. MACHINABILITY AND REMOVAL MECHANISM OF METAL-BASED SUPPORT STRUCTURES IN SELECTIVE LASER MELTING

    In selective laser melting (SLM), additional support structures play a critical role in the successful printing. However, support structures are not part of the final products, and all the support structures must be removed after printing. Despite its necessity, the removal of metal-based support …

    nus Repository record for MACHINABILITY AND REMOVAL MECHANISM OF METAL-BASED SUPPORT STRUCTURES IN SELECTIVE LASER MELTING (opens in a new tab) Download file for MACHINABILITY AND REMOVAL MECHANISM OF METAL-BASED SUPPORT STRUCTURES IN SELECTIVE LASER MELTING (opens in a new tab)

Page 1 of 31