Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Surface (Technology)"”.

  1. The effects of nanopattern surface technology and targeted metabolic therapies on orthopaedic implant related infections

    … Nanotopography refers to the topography of a surface at the nanometre level and has major effects on cell behaviour. Studies suggest that surface nanotopography impacts the differential ability of staphylococci species to adhere, and may reduce orthopaedic implant infection rate. This research …

    glasgow Download PDF for The effects of nanopattern surface technology and targeted metabolic therapies on orthopaedic implant related infections (opens in a new tab)

  2. Hazard Analysis Using Response Surface Technology on 2-Butanol Oxidation to 2-Butanone Using RC1 Calorimatry

    … amount based on the chosen parameters. Response surface methodology is utilized to determine the operating regions of synthesis reaction of 2-butanol to 2-butanone based minimize the heat release. Three Parameters used for experiments are operating temperature, 2-butanol concentration, and …

    tamu Repository record for Hazard Analysis Using Response Surface Technology on 2-Butanol Oxidation to 2-Butanone Using RC1 Calorimatry (opens in a new tab)

  3. DEVELOPMENT AND TESTING OF A LOW MASS VIBRATORY LUNAR COMPACTOR

    … preparation becomes a necessity. The Planetary Surface Technology Development Laboratory is developing a low mass lunar compactor as part of an autonomous site preparation vehicle in partnership with Colorado School of Mines, funded by NASA’s 2021 Lunar Surface Technology Research grant. The low …

    mtu Repository record for DEVELOPMENT AND TESTING OF A LOW MASS VIBRATORY LUNAR COMPACTOR (opens in a new tab)

  4. Monitoring Transport at Interfaces of Tunable Soft Surfaces

    … substrates. First, the effect of charged hard surfaces on charged probes were evaluated, as the soft surfaces were built upon such a structure. Then, selected polymers were selected according to their importance in smart surface technology. The extent of interaction of the selected probes with …

    rice Repository record for Monitoring Transport at Interfaces of Tunable Soft Surfaces (opens in a new tab)

  5. PERFORMANCE COMPARISON OF A LOW MASS VIBRATORY LUNAR SURFACE COMPACTOR IN VACUUM VERSUS ATMOSPHERE

    … Michigan Technological University’s Planetary Surface Technology Development Lab has developed a novel low-mass surface compaction tool for use on a site preparation vehicle in collaboration with Colorado School of Mines. Testing in vacuum is necessary to simulate a relevant environment, which …

    mtu Repository record for PERFORMANCE COMPARISON OF A LOW MASS VIBRATORY LUNAR SURFACE COMPACTOR IN VACUUM VERSUS ATMOSPHERE (opens in a new tab)

  6. COMMISSIONING AND TESTING OF A NEW DUSTY THERMAL VACUUM CHAMBER

    … is a new facility purchased by the Planetary Surface Technology Development Lab (PSTDL) that will be used to test the Technology Readiness Level (TRL) of extraplanetary devices and systems. With the use of vacuum pumps and simulated regolith, the DTVAC can create extraplanetary environments …

    mtu Repository record for COMMISSIONING AND TESTING OF A NEW DUSTY THERMAL VACUUM CHAMBER (opens in a new tab)

  7. ACTIVE GRAVITY OFFLOADING SYSTEM WITH INFRARED TRACKING FOR ROVER TESTING

    … (IRGO) system, developed for the Planetary Surface Technology Development Laboratory (PSTDL) and lunar simulant sandbox, has a similar aim. Through a series of iterations, IRGO has been developed to actively track an infrared beacon and follow a rover within the test chamber to eliminate …

    mtu Repository record for ACTIVE GRAVITY OFFLOADING SYSTEM WITH INFRARED TRACKING FOR ROVER TESTING (opens in a new tab)

  8. CALORIMETRIC MEASUREMENTS OF LUNAR REGOLITH SIMULANT AND WATER. AN EXPERIMENTAL STUDY CORRELATING WEIGHT PERCENT WATER AND TEMPERATURE CHANGE THROUGH PERIODS OF PHASE CHANGE.

    … identification of these volatiles on the lunar surface was a critical step in the development of NASA’s strategic goals for scientific discoveries, sustained space travel and exploration, and re-establishing a human presence on the moon. These volatiles are vital to the future of operating in …

    mtu Repository record for CALORIMETRIC MEASUREMENTS OF LUNAR REGOLITH SIMULANT AND WATER. AN EXPERIMENTAL STUDY CORRELATING WEIGHT PERCENT WATER AND TEMPERATURE CHANGE THROUGH PERIODS OF PHASE CHANGE. (opens in a new tab)

  9. Frequenzselektive Vibrationssensoren mit spannungsgesteuerter Resonanzabstimmung in Oberflächenmikromechanik

    … designed for fabrication using common silicon surface microtechnologies. Experimental tests of both mentioned tuning principles are carried out at structures fabricated using a surface technology known as SCREAM. A considerable part of the work focusses on nonlinear oscillations of the …

    qucosa-diss

  10. Simulation of Plasma Electrolytic Oxidation (PEO) of AM50 Mg Alloys and its Experimental Validation

    The PEO process is a useful surface technology to improve wear performance and corrosion resistance on light metals such as Mg, Al and Ti and their alloys. It has been studied for several decades, but up to now, its mechanism is still not fully understood. In order to improve the understanding of …

    cau-kiel Repository record for Simulation of Plasma Electrolytic Oxidation (PEO) of AM50 Mg Alloys and its Experimental Validation (opens in a new tab)

  11. THREE-DIMENSIONAL FACIAL ANTHROPOMETRY

    The use of 3D surface technology is progressively increasing in health clinics and research centers. Methods of capturing 3D facial surface may obtain more imaging information providing a reliable and fast analysis. Stereophotogrammetry is a promising method of soft-tissue evaluation that allows …

    milano Repository record for THREE-DIMENSIONAL FACIAL ANTHROPOMETRY (opens in a new tab)

  12. 'Since No Expressions Do': Queer Tools For Studying Literature

    … Reading formal expressions of queerness through technology, such as data formats and programming logics, surfaces the structures and constraints of non-normative identity formations and desires. In bringing these forms to the surface, technology also suggests some residue of meaning that cannot …

    cuny-grad Repository record for 'Since No Expressions Do': Queer Tools For Studying Literature (opens in a new tab)

  13. Corrosion Derived Iron Carbonate SLIPS for Calcium Carbonate Scale Mitigation

    … of this research is to build on an emerging surface technology, known as Slippery Liquid Infused Porous Surfaces (SLIPS) or Lubricant Infused Surfaces (LIS). The newly designed surface is intended specifically to provide anti-fouling capabilities in an oilfield environment. This concept …

    whiterose Download PDF for Corrosion Derived Iron Carbonate SLIPS for Calcium Carbonate Scale Mitigation (opens in a new tab)

  14. The Prospects For Coal Gasification

    … of the present position of coal gasification technology, both surface technology methods and underground coal gasification methods is given in some detail. The advantages of coal gasification compared with electricity production such as energy efficiency, capital cost and environmental impact …

    the-open-u Download PDF for The Prospects For Coal Gasification (opens in a new tab)

  15. STUDY OF BEARING CAPACITY TESTING AND SOIL PREPARATION TECHNIQUES IN LUNAR HIGHLANDS SIMULANT AT FIELD SCALE

    Humanity seeks to return to the surface of the Moon with the advent of the Artemis missions. These endeavors plan to be the beginning of a new era as NASA and other space organizations seek to establish a lunar base. Ahead of any astronauts or mining infrastructure, the physical groundwork will …

    mtu Repository record for STUDY OF BEARING CAPACITY TESTING AND SOIL PREPARATION TECHNIQUES IN LUNAR HIGHLANDS SIMULANT AT FIELD SCALE (opens in a new tab)

  16. Tissue engineered micro and macrovasculature utilizing stromal vascular fraction.

    … in collagen I or fibrin using superhydrophobic surface technology or electrospinning varying porosities of PCL and pressure sodding SVF cells into the material. It is possible to automate and create dosable units of microvascular tissue in spheroid format using SVF cells, ECM such as fibrin or …

    louisville Repository record for Tissue engineered micro and macrovasculature utilizing stromal vascular fraction. (opens in a new tab)

  17. Investigation of the striation formation in the course of abrasive waterjet cutting

    The principal defect of the surfaces generated by abrasive waterjet machining is excessive waviness (striation). The existing theories of striation formation are not adequate to explain this phenomenon. The presented study is concerned with the development of an understanding of the mechanism of …

    njit Repository record for Investigation of the striation formation in the course of abrasive waterjet cutting (opens in a new tab)

  18. Development of Graphene Related Solid Lubricant Coating

    … (Cu) multilayer composites were developed using surface modification, direct application, and electroplating processes. Among the samples, RGO- Cu coatings showed better overall results. Coatings with one to five layers were made on steel and copper substrates. Tribological, electrical, adhesion …

    chalmers Repository record for Development of Graphene Related Solid Lubricant Coating (opens in a new tab)

  19. Experimental Investigation of Single and Two-Phase Heat Transfer Performance in Microchannels with Surface Modifications and Multiple Inlet Restrictors

    … speeds, the volumetric heat generation rates and surface heat flux in many advanced power electronic devices have increased exponentially, creating an urgent need for efficient cooling technologies. It has become particularly challenging to maintain an optimal temperature at the device level. …

    south-carolina Repository record for Experimental Investigation of Single and Two-Phase Heat Transfer Performance in Microchannels with Surface Modifications and Multiple Inlet Restrictors (opens in a new tab)

  20. Frictional resistance of geotextiles

    <p>The pullout resistance of geotextiles was examined using pullout tests. A suitable wooden box with large (2 ft x 2 ft x 4 ft) dimensions was used to avoid the effect of boundary and to simulate field conditions. Two types of failure patterns were observed. For shallow embedment (<3 ft), …

    njit Repository record for Frictional resistance of geotextiles (opens in a new tab)

Page 1 of 2