Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 197 for “"Surface Contact"”.

  1. Interdigitated back-surface-contact solar cell modeling using Silvaco Atlas

    … was used to simulate an interdigitated back-surface-contact solar cell. The cell is modeled after the silicon-based Sunpower Corporation A-300 solar cell, which contains a number of unique features that give it advantages over conventional solar cells. This simulation attempted to match as …

    nps Repository record for Interdigitated back-surface-contact solar cell modeling using Silvaco Atlas (opens in a new tab)

  2. THE CHARACTERIZATION OF VIRUS INTERACTION WITH SELECTED SURFACE CONTACT DISINFECTANTS.

    … of this study was to investigate different surface contact disinfectants which, while having an inflexible dose concentration capability and releasing no residual disinfectant concentration, do not require monitoring and do not significantly leach into the waters they contact. Powdered …

    arizona-thes Repository record for THE CHARACTERIZATION OF VIRUS INTERACTION WITH SELECTED SURFACE CONTACT DISINFECTANTS. (opens in a new tab)

  3. Experimental Investigation of Thermo-mechanical Degradation of Thin Film Materials by Surface Contact

    … degradation of thin film materials by surface contact is investigated in this dissertation. Thin film materials studied include diamond-like carbon (DLC) films and ferromagnetic thin films. High speed surface contact on DLC films can cause graphitization of the material by frictional …

    ttu Repository record for Experimental Investigation of Thermo-mechanical Degradation of Thin Film Materials by Surface Contact (opens in a new tab)

  4. Electrifying the streets : the surface-contact controversy in five English towns 1880-1920

    … debates, five towns in England opted for the surface-contact system. Of these, Wolverhampton and Hastings are the main focus for this research because they occupy opposite ends of the social and political spectrum. Lincoln, Torquay, and Mexborough, where surface-contact traction survived for …

    the-open-u Download PDF for Electrifying the streets : the surface-contact controversy in five English towns 1880-1920 (opens in a new tab)

  5. Atomic force microscope cantilever with reduced second harmonic frequency during tip-surface contact

    … to the first mode frequency, for operation in contact with a substrate. A freely-resonating paddle internal to the cantilever reduces the stiffness of the second flexural mode relative to the first while nearly maintaining the mass of the original cantilever. This strategy allows the ratio of …

    uiuc Repository record for Atomic force microscope cantilever with reduced second harmonic frequency during tip-surface contact (opens in a new tab)

  6. Computational study on dynamic surface contact behavior of diamond-like carbon (DLC) doped with hydrogen

    … properties and tribological performance as a surface protective coating. In this study, molecular dynamics (MD) simulations are performed to investigate the mechanism of the effect hydrogen atoms have on the mechanical stiffness and thermomechanical contact behavior of DLC film. The …

    ttu Repository record for Computational study on dynamic surface contact behavior of diamond-like carbon (DLC) doped with hydrogen (opens in a new tab)

  7. Articular Surface Contact Parameters in High Tibial Osteotomy and Double Osteotomy: A Finite Element Approach

    … OA. The primary goal is to investigate the contact force and pressure distribution across the tibial plateau at different simulated correction angles. Additionally, the study examines the strain in the MCL under various corrections to assess the effects of under-correction, optimal …

    waterloo Repository record for Articular Surface Contact Parameters in High Tibial Osteotomy and Double Osteotomy: A Finite Element Approach (opens in a new tab)

  8. OPTIMIZATION OF A BACK SURFACE CONTACT COPPER INDIUM GALLIUM SELENIDE (CIGS) THIN FILM SOLAR CELL WITH NEARLY ORTHOGONAL LATIN HYPERCUBE AND SILVACO

    … on the optimization of a novel design back surface contact (BSC) copper indium gallium (di)selenide (CIGS). It introduces the Nearly Orthogonal Latin Hypercube (NOLH) design of experiments as a means of optimizing parameters to be entered into Silvaco ATLAS simulation software. By …

    nps Repository record for OPTIMIZATION OF A BACK SURFACE CONTACT COPPER INDIUM GALLIUM SELENIDE (CIGS) THIN FILM SOLAR CELL WITH NEARLY ORTHOGONAL LATIN HYPERCUBE AND SILVACO (opens in a new tab)

  9. MULTI-SCALE DYNAMICS OF MECHANICAL SYSTEMS WITH FRICTION

    Contact between rough surfaces occurs in numerous engineering systems and in many instances influences the macro behavior of the system. In many instances, the interaction between rough surfaces, affect the macro behavior of the system. Effective treatment of systems containing rough surface …

    siu-theses Repository record for MULTI-SCALE DYNAMICS OF MECHANICAL SYSTEMS WITH FRICTION (opens in a new tab)

  10. Surface Characterization of Contact Fatigue Tested Ground Spur Gears

    … gears fail in many ways but mostly due to surface contact fatigue. Gear failures can cost thousands of dollars. Failure due to contact surface fatigue represents an important fraction on all gear failures (about 20% according to ASM, 1975) and other failure types can have origin from …

    chalmers Repository record for Surface Characterization of Contact Fatigue Tested Ground Spur Gears (opens in a new tab)

  11. Derivation of solution for elliptical elastohydrodynamic contact patches with side-slip and its application to a continuously variable transmission

    … and forces in gears and rolling bearings without surface-to-surface contact and is the basis for a continuously variable transmission studied in this report. Previous research constructed models and derived solution methods, but often lacked full explanations of the approach and was usually …

    texas Repository record for Derivation of solution for elliptical elastohydrodynamic contact patches with side-slip and its application to a continuously variable transmission (opens in a new tab)

  12. Testing and Understanding Screwdriver Bit Wear

    … of the fundamentals of the bit/screw surface contact and its effect on force distribution. This thesis focuses on three areas. First, understanding how the tool and bit are used, and what factors contribute to bit wear. With this understanding, a test rig has been designed to emulate …

    vt Repository record for Testing and Understanding Screwdriver Bit Wear (opens in a new tab)

  13. Multi-scale friction modelling of lubricant-surface interaction in tribological contacts

    … In a dynamic system (e.g. piston ring/liner contact), the opposing sliding surfaces are separated by a layer of lubrication film, preventing direct metal-to-metal contact. Under critical operating conditions (e.g. high applied load), the film thickness might reduce to similar order of magnitude …

    soton Download PDF for Multi-scale friction modelling of lubricant-surface interaction in tribological contacts (opens in a new tab)

  14. Automatic tool path generation for numerically controlled machining of sculptured surfaces

    … numerically controlled machining of sculptured surfaces: TRI$\sb-$XYINDEX, FINISH, FIVEX$\sb-$INDEX, FIX$\sb-$AXIS$\sb-$INDEX. All of the above systems index the tool across the object surface in the Cartesian space so that evenly distributed tool paths are accomplished.TRI$\sb-$XYINDEX is a …

    unh-thes Repository record for Automatic tool path generation for numerically controlled machining of sculptured surfaces (opens in a new tab)

  15. Modeling and control of an adaptive tire-inflation system based on in-tire sensing feedback

    Tire contact area is an important feature that influences the performance of a ground wheeled vehicle, especially on soft terrain. This thesis evaluates a system meant to control tire-surface contact area by inflating and deflating the tire while the vehicle is in motion. The system includes a …

    texas Repository record for Modeling and control of an adaptive tire-inflation system based on in-tire sensing feedback (opens in a new tab)

  16. The Vroman effect: a molecular level description of fibrinogen displacement

    … the model protein, fibrinogen, onto hydrophilic surfaces. Techniques such as atomic force microscopy, immunochemical assays, fluorescence microscopy, and vibrational sum frequency spectroscopy were employed to probe this system. The results demonstrate that the protein's αC domains play the …

    tamu Repository record for The Vroman effect: a molecular level description of fibrinogen displacement (opens in a new tab)

  17. An ex-situ study of polymer electrolyte membrane fuel cell gas diffusion layer durability under steady-state and freezing conditions

    … bending stiffness, air permeability, surface contact angle, porosity and water vapor diffusion were studied. A GDL was aged ex-situ and its characteristics were evaluated as a function of aging time. GDL strain was measured to occur under steady-state aging conditions (80 °C and 200 …

    ubc Repository record for An ex-situ study of polymer electrolyte membrane fuel cell gas diffusion layer durability under steady-state and freezing conditions (opens in a new tab) Download PDF for An ex-situ study of polymer electrolyte membrane fuel cell gas diffusion layer durability under steady-state and freezing conditions (opens in a new tab)

  18. Process Optimization and Fundamental Consumables Characterization of Advanced Dielectric and Metal Chemical Mechanical Planarization

    … impacts. It is well known that pad-wafer contact and pad surface micro-structure have significant impacts on polishing performance. The first study in this dissertation investigates the effect of pad surface contact and topography on polishing performance during copper CMP. Two different …

    arizona-thes Repository record for Process Optimization and Fundamental Consumables Characterization of Advanced Dielectric and Metal Chemical Mechanical Planarization (opens in a new tab)

  19. Development of a Novel Grease Resistant Functional Coatings for Paper-based Packaging and Assessment of Application by Flexographic Press

    … materials are made. SEM images along with contact angle data suggest that coating performance is probably attributable to decreased mean pore size in conjunction with a slightly increased surface contact angle facilitated by crosslinking of PVA molecules by both borate ions and ACDA.

    unt Repository record for Development of a Novel Grease Resistant Functional Coatings for Paper-based Packaging and Assessment of Application by Flexographic Press (opens in a new tab)

  20. Albumin-polyethylene surface interactions

    … reports on experimental investigations of the surface reactions between human albumin and polyethylene (medical grade). Radioactive tracer technique was used in investigating these reactions. Albumin adsorption and turnover kinetics to polyethylene were studied under both static and flow …

    mcmaster Repository record for Albumin-polyethylene surface interactions (opens in a new tab)

Page 1 of 10