Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 191 for “"Surface Recombination"”.
-
Charge collection and surface recombination effects in organic bulk heterojunction solar cells.
… to estimate the charge collection lengths and surface recombination lengths of organic polymer solar cells. Photocurrent spectra have been analyzed systematically to observe the dependence on thickness of the active material. A red shift of the peak of the normalized photocurrent with respect …
-
Reducing surface recombination in black silicon photovoltaic devices using atomic layer deposition
Surface recombination in silicon solar cells decreases the collection probability of charge carriers and can hence lower the cell efficiency significantly. The reduction of this detrimental effect is addressed in this work by passivating the surface with different atomic layer deposited (ALD) thin …
-
Picosecond Measurement of Interband Saturation, Intervalence Band Absorption, and Surface Recombination in Germanium
… carrier cooling, carrier diffusion, or carrier recombination dominates the carrier dynamics immediately following excitation. The studies of a 5.7 um thick sample indicated that Auger recombination does not dominate the carrier dynamics, but that the carriers most likely cool immediately to …
-
Industrial PECVD AlOx films with very low surface recombination for silicon solar cells
… solar cell efficiency and is used as a rear side surface passivation layer for the passivated emitter and rear cell (PERC). Although the majority of commercial silicon solar cells are based on the PERC structure, there is still insufficient knowledge available in literature regarding the …
-
Contactless Spectral-Dependent Measurement of Bulk Lifetime and Surface Recombination Velocity in Silicon Photovoltaic Materials
… measurements allow for determination of bulk and surface properties of the material, including the intrinsic bulk lifetime and the surface recombination velocity. The effective lifetimes are fit to an analytical physics-based model to determine the desired parameters. Passivated and non-passivated …
-
Modeling of Current–Voltage Characteristics of Thin-film Solar Cells Incorporating Bulk and Surface Recombination: application to perovskite solar cells
… exponential photon absorption profile, bulk and surface recombination, and carrier drift & diffusion in the photon absorption layer. By solving the continuity equation for both electrons and holes in the perovskite layer, it is possible to construct an analytical formula for the …
-
The Effect of Intervalence-Band Absorption, Auger Recombination, Surface Recombination, Diffusion and Carrier Cooling on the Picosecond Dynamics of Laser-Induced Plasmas in Germanium
The picosecond optical response of germanium is investigated by performing excitation-probe experiments on a thin, intrinsic-germanium wafer maintained at 135 K. The results of three distinct experiments are reported: (1) the transmission of a single pulse is measured as a function of irradiance, …
-
Efficiency Improvement for III-V Nitride Micro Light-Emitting Diodes
… is mainly attributed to three reasons: Auger recombination, low hole injection and carrier overflow. On the contrary, the substantial carrier loss due to Shockley–Read–Hall (SRH) surface recombination is usually ignored in conventional GaN/InGaN LEDs. However, when the size of the GaN/InGaN …
-
Injektuotų krūvininkų pernašos ir rekombinacijos tyrimas hibridiniuose dariniuose /
… or MEH-PPV) transporting layers, investigate surface recombination speed of charge carriers at the TiO2 and organic layer interface and mobility in hole transport polymer. We found that both equilibrium and injected charge carriers concentrate at the TiO2 and organic layer interface. Extracted …
-
Dvigubos injekcijos srovės ir injekcinis CELIV tūrinės heterosandūros saulės elementuose /
… carriers extraction technique (CELIV) to measure surface recombination rate and compare it with bimolecular recombination coefficient which found by time of flight (TOF) method. The use of organic materials in electronic devices is the main topic nowadays. One of the most promising application for …
-
Dažais sensibilizuotų saulės elementų gamyba bei krūvininkų pernašos tyrimas /
… by using new measurement technique evaluate the surface recombination rate and determine factors limiting surface recombination rate. In order to determine the recombination rate in a bilayered structure, the extracted charge dependence on the injection current needs to be measured. In the case …
-
Effect of dimensions on the efficiency of radiant energy cells
… field appearing in diffused cells and the surface recombination velocity in the exposed layer of the cell. Although the expressions derived may be used for all semiconducting P-N cells, special efforts have been made in the analysis and the computations of the Germanium P-N cell. The …
-
Active microring and microdisk optical resonators on indium phosphide
… is used to minimize device heating and surface recombination as well as provide near single-mode operation. Additionally, optical amplifiers based on microrings are also developed for cascading passive optical gates. Optical amplification up to 10 db in pulsed mode has been observed for …
-
Theoretical study of time-resolved photoluminescence from silicon wafers and bricks
… minority carriers. The subsequent radiative recombination of charge carriers then releases photons which can be captured as time-dependent luminescence signals. Compared with traditional photoluminescence characterisation techniques, time-resolved photoluminescence requires fewer prior …
-
Influence of defects and impurities on solar cell performance
… and a negligible effect of front and back surface recombination velocity. This assumption can cause a significant error as the current mc-Si technology provides good surface passivation by SiN:H and very effective back surface fields. This work is an extension of previous models that use …
-
Krūvininkų paviršinės rekombinacijos tyrimai sandūroje tarp elektronus ir skyles pernešančių sluoksnių /
The Investigation of the Surface Recombination between Eelectron and Hole Transporting Layers.
-
Improving solar cell performance through surface modification of silicon
… light harvesting, and by developing a novel surface passivation technique via the covalent attachment of organic molecules to the surface. To aid the characterisation of these novel structures, we have developed a new measurement technique for surface recombination using the Kelvin …
-
Modeling gain degradation in bipolar junction transistors due to ionizing radiation and hot-carrier stressing.
… roles of net positive oxide trapped charge and surface recombination velocity in producing excess base current in bipolar junction transistors (BJTs) are identified. Although the interaction of these two quantities is physically complex, simple approaches for estimating their magnitude from …
-
Investigation on performance enhancement of micro-sized IR photodetectors
… is producing a significant dark current due to surface recombination. The increased surface area to volume ratio leads to a high carrier surface recombination rate, which significantly degrades the performance of InP-InGaAs micro-sized PDs, including the responsivity and detectivity. In this …
-
Passivation of the p-n junction edge in high-power semiconductor silicon devices /
… substrate due to non-homogeneity of passivated surface of the p-n junction. In this work, passivation of moat surface by means of electrochemical etching, formation of hydrogen-rich porous silicon layers and glass in-melting steps has been investigated. Passivation quality was controlled by the …
Page 1 of 10