Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 70 for “"Surface Resistivity"”.
-
Surface Resistivity for Concrete Quality Assurance
… penetration methods, substantiating the use of surface resistivity test for concrete quality assurance and paving the way for its adoption by the Nevada Department of Transportation and other public and private agencies.
-
The surface resistivity and charging of lexan
The surface resistivity of the polymer insulator Lexan™ (polycarbonate) in a vacuum environment has been investigated both experimentally and theoretically. The term surface resistivity is often used to describe the electrical properties of insulators at low fields; however, the standard method of …
-
Freeze-Thaw, Surface Resistivity, and High Temperature Performance of Local UHPC
… and durability related to weathering and surface resistance were considered, as well as material properties, to effectively withstand plausible environmental conditions. These parameters were then compared to the values of normal-strength concrete. The experimental results show that while …
-
Evaluation of the factors affecting the surface resistivity of fly ash
Thesis (Ph. D.)--Michigan State University. Department of Chemical Engineering, 1980
-
Humidity dependence of bulk and surface resistivity of polymers for HVDC applications
… charges tend to accumulate on polymeric surfaces that leads to modifications on the local electric field. Surface and bulk resistivities of polymers are fundamental material characteristics and their behavior under various operating conditions is crucial when it comes to predicting …
-
Experimental Investigation of Surface Resistivity of Yttrium Stabilized Zirconium as a Thin Film
… goal of our research is first to determine the surface resistivity for the simulated Yttrium Stabilized Zirconium structures optimize the experimental film deposition parameters that will lead to minimum surface resistivity in these films Yttrium Stabilized Zirconium thin film synthesis using …
-
Investigation of the Influences on Surface Resistivity used for Quality Control of Concrete
… There is an increasing interest in electrical resistivity as non-destructive tests for quality control of concrete structures in the last decades. Electrical resistivity is a technique that is rapid and inexpensive. This project studied how the electrical resistivity of concrete and mortar …
-
A theoretical earth resistivity study with applications on the Llano Estacado
Mathematical model calculations and field resistivity measurements related to ground-water investigations on the Llano Estacado were made. The original potential function equations by Ehrenburg and Watson were extended to eleven parallel layers (ten layers and a half space) to represent a …
-
Evaluation of Resistivity Meters for Concrete Quality Assurance, Project TR201414
… to verify existing relationships between surface resistivity (SR), rapid chloride permeability (RCP), chloride ion diffusion, and the AASHTO penetrability classes. The research also performed a precision and bias evaluation to provide acceptable limits should SR be implemented for quality …
-
Elucidating the Fresh and Hardened Properties of Limestone Calcined Clay Cements through Data Analytics
… strength development and durability assessed by surface resistivity test is investigated. The compositional design space considers variations in water-to-solids ratio, proportions of constituent materials (PC, calcined clay or “metakaolin” (MK), limestone (LS)), added gypsum content, limestone …
-
DURABILITY PROPERTIES OF CONCRETE WITH 100 PERCENT COARSE RECYCLED CONCRETE AGGREGATES
… by measurement of resistance to degradation, resistivity test, density, absorption, and voids in the hardened concrete. A regression model for the surface resistivity of RCA showed that the surface resistivity increases when the absorption of RCA, w/c of concrete, and the volume of mortar …
-
Radar cross section synthesis of doubly curved surfaces
… cross section (RCS) of various geometries with surface resistivity is synthesized using a physical optics approximation. Using the RCS, a set of equations are developed for reconstructing the resistivity across the surface. The reconstructed resistivity is then compared with the original …
-
Influence of moisture on the resistivity of selected South African fly ashes
… for the control of fly ash, with fly ash resistivity being an important factor strongly influencing ESP performance. The resistivity of fly ash is influenced by a number of factors; including the chemical composition of the ash and adsorption of physical or chemical species on the surface …
-
Influence of moisture on the resistivity of selected South African fly ashes
… for the control of fly ash, with fly ash resistivity being an important factor strongly influencing ESP performance. The resistivity of fly ash is influenced by a number of factors; including the chemical composition of the ash and adsorption of physical or chemical species on the surface …
-
Durability Assessment and Service Life Prediction of Concrete in Extreme Aggressive Environment
… between chloride diffusion rates and concrete resistivity. By identifying these correlations and based on the target service life, the research aims to set appropriate thresholds for Surface Resistivity (SR) and Bulk Resistivity (BR) tests, which will be used to qualify concrete mixes used in …
-
Enhancing Urban Energy Sustainability through PCM-Integrated Mortar Infrastructure
… thermal conductivity, specific heat capacity, surface resistivity, and water absorption. The optimized mix, P6G15 (i.e., 6% PCM and 15% Glass), demonstrated the best combined thermos-mechanical performance. It achieved a compressive strength of 29.8 Mpa. In terms of thermal conductivity there …
-
Durability of Lightweight Concrete for Bridge Decks
… for a concrete mix, use of the newer and easier Surface Resistivity (SR) test as an alternative to the slower, more complicated “Rapid Chloride Ion” test became a desirable option. Most of the test results reported in this thesis were from SR tests.</p> <p>This thesis reports the results of …
-
Geophysical and geological study of surficial deposits near Frobisher, Saskatchewan
Surface DC resistivity, total gravity field, and horizontal gravity gradient surveys were conducted in an area of approximately 200 square miles near to the city of Estevan in southeastern Saskatchewan, Canada. The results of these surveys, together with the first arrivals from oil-company seismic …
Page 1 of 4