Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"Surface conditioning"”.

  1. Impact of surface conditioning of large area electrodes on the dielectric strength of water

    … localized field enhancements on the electrode surface caused from asperities or microprotrusions on the electiode surface. The research conducted here attempts to determine the impact of electiode surface conditions on the holdoff voltage of a water gap. In this document, experimental results …

    ttu Repository record for Impact of surface conditioning of large area electrodes on the dielectric strength of water (opens in a new tab)

  2. Effect of surface conditioning methods on repair bond strength of microhybrid resin matrix composite

    … to adhere to a new layer of rein. Therefore, surface treatments of the aged resin matrix composite surface prior to repairing could improve the repair bond strength. The objectives of this study were to: 1) To evaluate various surface treatments on shear bond strength of repair between aged …

    iupui Repository record for Effect of surface conditioning methods on repair bond strength of microhybrid resin matrix composite (opens in a new tab)

  3. Effect of surface conditioning and storage time on the bond strength of orthodontic brackets to lithium disilicate ceramic

    The effect of different surface conditioning procedures on bracket bond strength to lithium disilicate ceramic were investigated after 30 min, 24 h and 6 months of water storage. Brackets were bonded to 300 IPS e.max samples (Ivoclar Vivadent). Five surface conditioning procedures were tested: 15 …

    ubc Repository record for Effect of surface conditioning and storage time on the bond strength of orthodontic brackets to lithium disilicate ceramic (opens in a new tab) Download PDF for Effect of surface conditioning and storage time on the bond strength of orthodontic brackets to lithium disilicate ceramic (opens in a new tab)

  4. Effect of clinical and laboratory contamination media on the adhesion of luting cement to direct and indirect resin composite materials

    … tests. Both contamination media (p = 0.000) and surface conditioning (p = 0.005) significantly affected adhesion to DRC and IRC. No significant difference was found between the DRC and IRC (without: p = 0.098; with: p = 0.084). Significantly lower results were obtained after SI (DRC: 0.66 ± 0.6; …

    zurich

  5. THE EFFECT OF H2SO4 SURFACE PRE-TREATMENT ON THE STRESS CORROSION CRACKING OF MAGNESIUM ALLOY AZ31B

    … Mg alloy AZ31B was investigated with respect to surface condition. Salt fog U-bend testing was used to identify changes in SCC as a result of surface conditioning pre-treatments. Six surface conditions were investigated: as-received, mechanically-polished, sulphuric acid (H2SO4)-cleaned, …

    mcmaster Repository record for THE EFFECT OF H2SO4 SURFACE PRE-TREATMENT ON THE STRESS CORROSION CRACKING OF MAGNESIUM ALLOY AZ31B (opens in a new tab)

  6. Multipactor and Mitigation in X-band Waveguide

    … geometries. The primary focus areas are surface modifications, surface conditioning, and the exploration of additive manufacturing. In this context, ”surface modifications” encompasses coatings using materials like titanium nitride and geometric alterations, such as incorporating dimpled …

    ttu Repository record for Multipactor and Mitigation in X-band Waveguide (opens in a new tab)

  7. Sequential Afterglow Processing and Non-Contact Corona-Kelvin Metrology of 4H-SiC

    … the development of practical MOS-type devices. Surface conditioning and oxidation of 4H-SiC were investigated using a novel sequential afterglow processing approach combined with the unique capabilities of non-contact corona-Kelvin metrology. The use of remote plasma assisted thermal oxidation …

    usf Repository record for Sequential Afterglow Processing and Non-Contact Corona-Kelvin Metrology of 4H-SiC (opens in a new tab)

  8. Enamel conditioning effect on penetration and microleakage of glass ionemer-based sealants

    … to evaluate the influence of different fissure conditioning techniques on penetration and microleakage of glass ionomer (GI) and resin-modified glass ionomer cements (RMGI) used as sealants. Clinically sound extracted human molars were distributed into nine experimental groups (n = 15 each). …

    iupui Repository record for Enamel conditioning effect on penetration and microleakage of glass ionemer-based sealants (opens in a new tab)

  9. Bonding Orthodontic Brackets to Stainless Steel Crowns

    … crowns using various orthodontic adhesives and surface conditioning techniques. One hundred and twenty mandibular first molar stainless steel crowns were randomly divided into groups: (1): Aluminablasting + Metal Primer + Assure; (2): Aluminablasting + Silane Coupling Agent + Transbond; (3): …

    vcu Repository record for Bonding Orthodontic Brackets to Stainless Steel Crowns (opens in a new tab)

  10. Methods for the analysis of low-Z plasma facing surfaces in magnetic fusion applications

    … been used to investigate the effect of wall tile surface conditioning on plasma performance during operation. Previous campaigns have demonstrated the enhanced suppression of edge-localized modes (ELMs) and reduced divertor recycling when wall tile conditioning via boronization was performed, and …

    uiuc Repository record for Methods for the analysis of low-Z plasma facing surfaces in magnetic fusion applications (opens in a new tab)

  11. Testbed for X-band multipactor investigation

    … in the kW to tens of kW range. The effects of surface conditioning via electron impact were also studied with an interest on the mitigation of multipactor. This is achieved through changes to the SEY of the test material by scrubbing from multipacting electrons. To achieve this the system was …

    ttu Repository record for Testbed for X-band multipactor investigation (opens in a new tab)

  12. Investigations of potentially implantable glucose sensors

    … of oxygen partial pressure. The electrode surface conditioning was proven to be the most important factor affecting the quantitative measurement of H20i. Covering the electrode surface with cellulose acetate membrane could effectively protect the electrode surface and substantially shorten …

    ku Repository record for Investigations of potentially implantable glucose sensors (opens in a new tab)

  13. Investigation of surface parameters of ci26 polymer after femtosecond pulse laser processing /

    … that can enable fast, software-defined surface modification and micromachining. This work aimed to characterize femtosecond-laser interaction with the CI26 hydrophilic acrylic IOL polymer at 1030 nm wavelength, with emphasis on ablation thresholds, incubation effects, and surface …

    vilnius Repository record for Investigation of surface parameters of ci26 polymer after femtosecond pulse laser processing / (opens in a new tab)

  14. Anti-Caries Efficacy of Fluoride at Increasing Maturation of a Microcosm Biofilm

    … in-vitro microbial caries model. We evaluated: surface conditioning using saliva; sucrose concentrations and caries lesion severity; growth media conditions and mineral saturation; dental substrate types; pH cycling protocol characteristics. In the second aim, we used the developed model to …

    iupui Repository record for Anti-Caries Efficacy of Fluoride at Increasing Maturation of a Microcosm Biofilm (opens in a new tab)

  15. Shear Bond Strength Characteristics on Surface Treatment Modalities of CAD-CAM Resin Based Core Materials

    … thickness 10 mm, length 10 mm, width 10 mm. The surfaces were treated with 110 μm Al2O3, Rocatec activated with silica-modified alumina oxide treatment (3M, USA), 50μm Al2O3, trimmed with a carbide bur, and no treatment. After surface treatment, it was gently cleansed with oil free steam and …

    marquette Repository record for Shear Bond Strength Characteristics on Surface Treatment Modalities of CAD-CAM Resin Based Core Materials (opens in a new tab)

  16. Produção e caracterização da surfactina de Bacillus velezensis H2O-1 e suas diferentes aplicações na indústria do petróleo

    … of the biofilm formation on the conditioned surfaces (carbon steel coupons) in reactors with presence of microorganisms present in the water of production. Surface conditioning with surfactin change the cupons hydrophobicity, leaving them less hydrophobic. Moreover, this treatment reduced the …

    brazil-uerj Repository record for Produção e caracterização da surfactina de Bacillus velezensis H2O-1 e suas diferentes aplicações na indústria do petróleo (opens in a new tab)

  17. Effect of cleaning methods upon electrochemical behavior of high-carbon steel cathodes in a chromic acid electrolyte

    … is to a great ex- tent determined by cleaning or surface-conditioning methods employed in preparing the basis metal for plating. Cleaning pro- cedures are usually established empirically, by trial and error. Little or no experimental work was devoted to a quantitative stu- dy of measurable …

    njit Repository record for Effect of cleaning methods upon electrochemical behavior of high-carbon steel cathodes in a chromic acid electrolyte (opens in a new tab)

  18. STUDY AND CHARACTERIZATION OF INNOVATIVE CLEANING METHODS IN MICROELECTRONICS

    … cleaning steps with the greatest impact on Si surface chemical-physical characteristics, such as the drying step with IPA vapors. Different wafer typologies have been used, in order to evaluate the influence that previous manufacturing process flow can have on Si/gate oxide interface. Different …

    catania Repository record for STUDY AND CHARACTERIZATION OF INNOVATIVE CLEANING METHODS IN MICROELECTRONICS (opens in a new tab) Restricted access

Page 1 of 2