Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 57 for “"Surface flashover"”.

  1. Short pulse high power microwave surface flashover

    … in transmitted power density and pulse length by surface flashover occurring across dielectric interfaces. This phenomenon can absorb and/or reflect the incident microwave pulse, causing transmission to cease and potentially damaging the microwave source and the dielectric interface itself. The …

    ttu Repository record for Short pulse high power microwave surface flashover (opens in a new tab)

  2. Physics of dielectric surface flashover at atmospheric pressures

    … In order to determine the processes involved in surface flashover, the test setup is designed to produce and closely monitor breakdowns across various gap distances and insulator geometries at atmospheric conditions with varying humidity. Current, voltage, luminosity, and optical emission spectra …

    ttu Repository record for Physics of dielectric surface flashover at atmospheric pressures (opens in a new tab)

  3. PROGRESSION OF SURFACE FLASHOVER IN VACUUM WITH POLYMER INSULATORS

    … in these pulsed power insulation systems, surface flashover in vacuum is one of the most extensively studied areas since it being the greatest constraint in providing power due to dielectrics that are not able to sustain the voltage the system is operating under. These dielectrics are used …

    unm Repository record for PROGRESSION OF SURFACE FLASHOVER IN VACUUM WITH POLYMER INSULATORS (opens in a new tab)

  4. Inhibiting Surface Flashover in Vacuum with High Gradient Insulators

    … is too large, the insulators can fail due to surface flashover. As systems become more compact, the threat of failure by insulator flashover increases, making the optimization of insulators a critical task for reliability. Insulators at a vacuum interface are especially vulnerable to surface …

    unm Repository record for Inhibiting Surface Flashover in Vacuum with High Gradient Insulators (opens in a new tab)

  5. High Power Microwave Induced Surface Flashover in Atmospheric Conditions

    High power microwave surface flashover is induced with a 2.85 GHz, 4 MW, 3 microsecond microwave pulse which is guided through a WR-284 waveguide structure. Flashover is observed in various pressures (100 - 400 torr) and gases (air, N2, and argon) in order to characterize the breakdown thresholds …

    ttu Repository record for High Power Microwave Induced Surface Flashover in Atmospheric Conditions (opens in a new tab)

  6. An Investigation into High Power Microwave Induced Surface Flashover

    High power microwave (HPM) surface flashover imposes a limitation to the magnitude of power that can be transmitted across the dielectric interface of the vacuum HPM system and atmosphere. The flashover is produced with a 2.85 GHz, 4 MW, 3 micro-second microwave pulse through a WR-284 waveguide …

    ttu Repository record for An Investigation into High Power Microwave Induced Surface Flashover (opens in a new tab)

  7. Pulsed magnetic field effects on dielectric surface flashover in vacuum

    … of pulsed magnetic fields on dielectric surface flashover in vacuum is investigated under non-uniform field conditions. The magnetic field is applied parallel to the dielectric surface and perpendicular to the electric field, which is derived from a pulsed test voltage. Predictions from …

    ttu Repository record for Pulsed magnetic field effects on dielectric surface flashover in vacuum (opens in a new tab)

  8. Surface flashover under RF and unipolar excitation at atmospheric conditions

    In vacuum environments surface flashover events driven by RF (f < 10 GHz) and unipolar excitation have been shown to have virtually identical dominant mechanisms. Similarities between RF (representing high-power microwave window breakdown on the high pressure side) and unipolar surface flashover …

    ttu Repository record for Surface flashover under RF and unipolar excitation at atmospheric conditions (opens in a new tab)

  9. An investigation of pulsed high power microwave dielectric surface flashover

    … of a statistical model which predicts HPM surface flashover events for various experimental conditions.

    ttu Repository record for An investigation of pulsed high power microwave dielectric surface flashover (opens in a new tab)

  10. Dielectric surface flashover in a simulated low earth orbit environment

    … solid dielectrics as insulators. In general, surface flashover on insulators sets the limit on the applicable voltage of the system. For practical applications, scaling laws (i.e., empirical curves relating the flashover voltage to the gap distance) were formulated which describe the simplest …

    ttu Repository record for Dielectric surface flashover in a simulated low earth orbit environment (opens in a new tab)

  11. Physics of pulsed unipolar dielectric surface flashover at atmospheric conditions

    Dielectric surface flashover along insulators in atmospheric conditions has been empirically characterized over the years. However, the underlying physics involved in atmospheric flashover has yet to be extensively analyzed and understood with variable parameters such as background gas, humidity, …

    ttu Repository record for Physics of pulsed unipolar dielectric surface flashover at atmospheric conditions (opens in a new tab)

  12. A Model of high power microwave surface flashover at atmospheric pressures

    High Power Microwave Surface Flashover across a dielectric boundary between a high power microwave source and atmospheric environment can cause significant reflection and attenuation of the incident power, leading to a reduction in source efficacy or damage to sensitive components; therefore, it is …

    ttu Repository record for A Model of high power microwave surface flashover at atmospheric pressures (opens in a new tab)

  13. Statistical Characterization of Vacuum Surface Flashover for Positive 45-Degree Geometries

    … a vacuum interface becomes too high, and vacuum surface flashover occurs. This flashover shorts the anode to the cathode and limits the maximum energy transfer to the intended load. Flashover can initiate from either the cathode or the anode, depending on the angle of the insulator. For +45° …

    ttu Repository record for Statistical Characterization of Vacuum Surface Flashover for Positive 45-Degree Geometries (opens in a new tab)

  14. Study of early light emission from anode-initiated surface flashover in vacuum

    The physical phenomena leading to high voltage surface flashover are investigated. Surface flashover is a possible failure mechanism in high voltage vacuum systems which involves electrical breakdown across the surface of an insulator. Positive angled insulator geometries, i.e. insulators which are …

    ttu Repository record for Study of early light emission from anode-initiated surface flashover in vacuum (opens in a new tab)

  15. Outgassing and plasma development during the early phase of vacuum surface flashover

    Surface flashover at the electricalK stressed interface betsveen a solid dielectnc and the ambient medium is often the limiting factor in a high-voltage system. This work describes the unique application of an improved refractive index sensor to gather additional information about charge-carrier …

    ttu Repository record for Outgassing and plasma development during the early phase of vacuum surface flashover (opens in a new tab)

  16. An experimental apparatus and diagnostics for the study of vacuum surface flashover

    … a conductive plasma channel developing along the surface of the insulating material, which effectively shorts both electrodes together, compromising the electrical integrity. While breakdown can initiate at the cathode, anode-initiated flashover is believed to be more dominant with 45-degree …

    ttu Repository record for An experimental apparatus and diagnostics for the study of vacuum surface flashover (opens in a new tab)

  17. Gas-solid interfaces stressed with HV impulses : surface flashover behaviour and control

    … as well as mechanical support. The breakdown/flashover voltage, at which a discharge process initiates across the gas-solid interface, is important in the design process, as it informs designers of specific threshold ‘failure’ voltages of the insulation system. In this thesis, a method to …

    strathclyde Repository record for Gas-solid interfaces stressed with HV impulses : surface flashover behaviour and control (opens in a new tab)

  18. Fast electrical and optical diagnostics for the early phase of dielectric surface flashover

    … as electrical insulators, for which dielectric surface flashover is the primary factor limiting the magnitude of the applicable voltage. The voltage limitations imposed by dielectric surface flashover are particularly onerous because the physical mechanisms leading to flashover are far from …

    ttu Repository record for Fast electrical and optical diagnostics for the early phase of dielectric surface flashover (opens in a new tab)

Page 1 of 3