Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 46 for “"Surface flaws"”.
-
Fatigue growth of surface flaws in finite plates
… most commonly observed structural defect is the surface crack. The primary difficulty in analyzing the growth of surface cracks is the stress intensity factor which varies from point to point along the crack due to crack front curvature and the complex local geometry. The study of surface cracks …
-
Fatigue growth of surface flaws in finite plates
… most commonly observed structural defect is the surface crack. The primary difficulty in analyzing the growth of surface cracks is the stress intensity factor which varies from point to point along the crack due to crack front curvature and the complex local geometry. The study of surface cracks …
-
Effects of constraint variation on the fatigue growth of surface flaws
… have shown that fatigue growth of semielliptic surface flaws in plates is not adequately predicted solely by stress intensity factor analysis. The variation in stress field triaxiality along the flaw border must be an important factor contributing to differences between predicted and observed …
-
Fatigue growth of surface flaws in finite plates under two level block loading
… to obtain additional insight into the growth of surface flaws subjected to simple variable amplitude loading. The experimental results were used to examine a method of mathematically modeling crack propagation behavior to enhance predictive capability. The mathematical modeling consisted of using …
-
Stress intensity factors for long, deep surface flaws in plates under extentional fields
… agreement for the moderate (a/t ≃ 0.5) to deep flaws (a/t ≃ 0.75) and a/2c > 0.15 was found with a semi-empirical theory due to J. C. Newman when compared on the basis of equivalent flaw depth and area. The Smith theory, when correlated on the basis of flaw depth and area, appears to yield …
-
A feasibility study of a computer-based wind turbine blades surface flaws inspection method
… such as wind turbine blades (WTBs), aircraft surfaces, and bridges. Lowering costs by reducing maintenance hours and increasing labor safety, decreasing production and service downtimes, promoting high accuracy inspections as well as making early repair are motivating factors for having …
-
Ultrasonic and Eddy Current Non-Destructive Evaluation of Near-Surface Flaws in Additively Manufactured Metal
… by AM metal, particularly with respect to surface roughness, representative flaws, and anisotropic material properties. The development of reference blocks that produce consistent results when inspected with specific NDE methods, such as ultrasonic testing (UT) and eddy current testing …
-
The effect of single, shaped surface flaws on ductility in cast aluminum dog bone specimens in uniaxial tension
… of the actual void geometry of real materials. Surface flaws, on the other hand, are often modeled to mimic their actual appearance in real materials. This being the case, little research has been conducted on actual void geometry or highly specific, three-dimensional surface flaw geometry. This …
-
Laser dynamic photoelasticity and digital image analysis for nondestructive evaluation of surface and near surface flaws through ultrasonic spectroscopy
<p>The interaction of Rayleigh surface waves with artificial surface-breaking and near surface flaws in a half-space have been investigated. The work reported in this research substantiates the validity of ultrasonic spectroscopy as an effective tool in nondestructive evaluation of the depth of …
-
Characterization and Modeling of Two Dimensional Crack Growth in Gas Turbine Materials
Surface flaws are common in gas turbine components and undergo a complex process of fatigue crack growth under mechanical and thermal loading. This project seeks to bring greater clarity and understanding to the transition process of surface flaws to through cracks by implementing a transition …
-
Maximum likelihood estimator method to estimate flaw parameters for different glass types
… primarily due to the presence of microscopic flaws present on the surface that acts as stress concentrators. Hence, to accurately estimate the strength of glass, the presence of surface flaws need to be addressed. The glass failure prediction model is a probabilistic model that addresses the …
-
Development of Low Expansion Glaze Coatings on As Fired Si₃N₄ to Enhance Room Temperature Flexural Strength
… various high-performance applications. However, surface defects such as voids/pits are commonly present on as processed Si₃N₄. When subjected to external forces, fracture originates at such flaws. To reduce or eliminate surface flaws, machining operations are required which constitute a major …
-
Failure prediction for heat treated window glass
… glass failure to the characteristics of the surface flaws on the glass and the magnitude of the induced residual compressive surface stress in the glass. The characteristics of the surface flaws can only be estimated from the results of carefully controlled window glass failure tests. Four …
-
Experimental determination of the stress singularity exponent in cracked bodies using photoelasticity
… field surrounding the border of semi-elliptical surface flaws, particularly the singularity exponent. Stress freezing photoelasticity is employed to generate experimental data from nearly incompressible, elastic material. The technique of optical fringe multiplication is utilized to collect data …
-
Elevated temperature mechanical properties of zirconium diboride based ceramics
… to characterize the strength limiting flaws as a function of temperature. Strength of ZS in argon was controlled by the SiC cluster size up to 1800ºC, and the formation of B-O-C-N phases that bridged SiC clusters above 2000ºC. For ZC, surface flaws introduced during specimen preparation …
-
Prediction of surface flaw propagation in finite plates
… is to improve the accuracy of the prediction of surface flaw fatigue life under constant amplitude loading. The concepts of crack closure and effective stress intensity factor are used to formulate a table of fatigue crack growth rate data from tests performed on compact tension specimens. This …
-
Experimental method of analyzing stress intensity factors and singularity order in rocket motor geometry
… of frozen stress experiments were conducted on surface flaws of varying aspect ratios in pressurized cylinder with star-shaped cutout in order to study the stress intensity factor distribution along the flaw border and to estimate the loss of the inverse square root singularity when the crack …
-
The Effect of Surface Corrosion Damage on the Fatigue Life of Extruded Aluminum Alloy 6061-T6
… been published about the effects of damage from surface corrosion on its fatigue life. An investigation was performed where 6061-T6 extrusions were exposed to a 3.5% NaCl solution at pH 2 for 2 days and 24 days. The length of time and pH were chosen in order to create distinct surface flaws. The …
-
Application of imaging techniques for characterizing MPI data
… is widely used in the industry for detecting surface or near surface flaws in ferromagnetic specimens. However, the attempts to quantify the physics underlying the method have been limited. This thesis is an effort to model the behavior of the magnetic particles under the influence of magnetic …
-
Test Methodologies for Dynamic Fracture Strength of Single Crystal Silicon
… the fracture strength is influenced by surface flaws, which are functions of microfabrication processing techniques. This work assesses the influence of deep reactive ion etching (DRIE) technology on the dynamic fracture strength of SCSi. The primary focus was to develop test …
Page 1 of 3