Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 85 for “"Surface oxides"”.

  1. The Formation and Dissolution of Surface Oxides on Platinum

    Made available in DSpace on 2014-12-05T19:37:15Z (GMT). No. of bitstreams: 1 6000174.pdf: 4433418 bytes, checksum: c6d3953c56a0331862b87d2448145504 (MD5) Previous issue date: 1959

    uiuc Repository record for The Formation and Dissolution of Surface Oxides on Platinum (opens in a new tab)

  2. Permeation studies of hydrogen in 304 and 316 stainless steel: the influence of surface oxides

    … flow method, analysed with a two rate constant surface reaction model, provides a series of permeation, P<sub>m</sub>, diffusion, D, and surface rate coefficients, k<sub>1</sub>, k<sub>2</sub>, for hydrogen passing through 304 and 316 stainless steel. The method developed here allows the …

    the-open-u Download PDF for Permeation studies of hydrogen in 304 and 316 stainless steel: the influence of surface oxides (opens in a new tab)

  3. Transformation of Surface Oxides during Vacuum Heat Treatment of a Powder Metallurgical Hot Work Tool Steel

    Characteristics of surface oxide in case of gas atomized Hot Work Tool Steel powder X40CrMoV5-1 in asatomized condition and after heat treatment at different temperatures in vacuum conditions are discussed. Reduction of surface oxides on steel powder prior to consolidation is mandatory to achieve …

    chalmers Repository record for Transformation of Surface Oxides during Vacuum Heat Treatment of a Powder Metallurgical Hot Work Tool Steel (opens in a new tab)

  4. Trihalomethane, Dihaloacetonitrile, and Total N-nitrosamine Precursor Adsorption by Carbon Nanotubes: The Importance of Surface Oxides and Pore Volume

    … = 0.001). A multicollinearity analysis suggested surface oxides – particularly carboxyl groups – on the CNTs increased CPV, presumably by increasing electrostatic repulsive forces, which enhanced microporosity sufficiently to overshadow any repulsion of DBP precursors from negatively charged …

    arkansas Repository record for Trihalomethane, Dihaloacetonitrile, and Total N-nitrosamine Precursor Adsorption by Carbon Nanotubes: The Importance of Surface Oxides and Pore Volume (opens in a new tab)

  5. Surface oxide removal on aluminum nitride substrates

    … and devices, but the well-known formation of surface oxides on AlN can result in a dense layer of stacking faults that create dislocations at the regrowth interface. AlN has a polar surface which readily oxidizes in air, which means that ex situ cleaning methods are not sufficient to achieve …

    gatech Repository record for Surface oxide removal on aluminum nitride substrates (opens in a new tab)

  6. Ion-Exchange Properties Of Chemically And Physically Modified Graphite.

    … 10('-6) eq/g of graphite by the available surface area of the graphite. Acidic surface oxides on the graphite interfered with the determination of the contribution of the adsorbed organic compounds to ion-exchange. An electrically conductive ion-exchange medium was developed by partially …

    wvu Repository record for Ion-Exchange Properties Of Chemically And Physically Modified Graphite. (opens in a new tab)

  7. Structure, oxidation, and catalytic activity of platinum-tin surfaces

    This thesis work has focused on the platinum-tin surface, especially how it behaves when exposed to gases like oxygen and carbon monoxide. Platinum-tin is used as a catalyst for a range of reactions, including the oxidation of carbon monoxide at mild conditions, which is important for gas …

    lund Repository record for Structure, oxidation, and catalytic activity of platinum-tin surfaces (opens in a new tab) Download PDF for Structure, oxidation, and catalytic activity of platinum-tin surfaces (opens in a new tab)

  8. Study of Steelmaking Reactions of Blast Furnace Hot-Metal

    … were analysed for change in composition and surface morphology. Results indicated whilst no dephosphorisation took place within the short fall time (~0.32 seconds) or during the extended reaction time (60 seconds), liquid surface oxides formed as oxidation of carbon, silicon, manganese and …

    whiterose Download PDF for Study of Steelmaking Reactions of Blast Furnace Hot-Metal (opens in a new tab)

  9. Investigation of Plating Process Variability and Mechanism for Oxide Disruption in a Ni-Modified Fluxless Brazing Process for Aluminum Alloys

    The effect of surface oxides and the presence of ternary constituents were examined using differential scanning calorimetry (DSC) along with SEM, EDX, and TEM studies to quantitatively analyze the role of nickel in its use as a fluxless braze promoter for aluminum alloys during brazing. This braze …

    waterloo Repository record for Investigation of Plating Process Variability and Mechanism for Oxide Disruption in a Ni-Modified Fluxless Brazing Process for Aluminum Alloys (opens in a new tab)

  10. Design of Reducing Agent for Sintering of High-Performance Alloyed PM Steels Based on Different Carbon Grades Analysis

    … iron particles is the reduction of the surface oxides to provide metal-metal contact between adjacent particles and thus allowing the neck formation to take place. According to the latest experimental data, the carbon starts to be active at high temperature (˃900ºC), after which graphite …

    chalmers Repository record for Design of Reducing Agent for Sintering of High-Performance Alloyed PM Steels Based on Different Carbon Grades Analysis (opens in a new tab)

  11. Application of modulated hydrodynamic voltammetry to the study of anodic electrocatalysis

    … study of anodic reactions electrocatalyzed by surface oxides at noble metal electrodes. QHMV permits extraction of the convective-coupled faradaic component from the total electrode current by alternating the rotational velocity of a rotating disk electrode (RDE) about a non-zero value and …

    iastate Repository record for Application of modulated hydrodynamic voltammetry to the study of anodic electrocatalysis (opens in a new tab)

  12. A study of the CO2-C-CO equilibrium

    … was depositing carbon on to the charcoal surface, the activity of the sample should have increased with time. The absence of any increase indicated that the equilibrium reaction was proceeding by means of some other mechanism, which very probably involved the surface oxides on the charcoal.

    ubc Repository record for A study of the CO2-C-CO equilibrium (opens in a new tab) Download PDF for A study of the CO2-C-CO equilibrium (opens in a new tab)

  13. Thermal Aging Effects on the Microstructure, Oxidation Behavior, and Mechanical Properties of As-Cast Ni<sub>3</sub>Al Alloys

    … the initial stages of oxidation at 900⁰C, surface oxides form along the microsegregation patterns, revealing the cast microstructures. The first oxide to form is mostly NiO with small amounts of Cr₂O₃,ZrO₂,NiCr₂O₄, and [theta]-Al₂O₃. Initial oxidation occurs primarily in the interdendritic …

    utk-theses Repository record for Thermal Aging Effects on the Microstructure, Oxidation Behavior, and Mechanical Properties of As-Cast Ni<sub>3</sub>Al Alloys (opens in a new tab)

  14. Electrochemistry and stoichiometry of thin film oxides on nickel.

    … stages of electrochemical oxidation of nickel surfaces have been investigated with respect to (a) anodic formation and reduction characteristics of the thin oxide films; (b) chemical characterization of the films, e.g. determination of the active oxygen to nickel content and stoichiometry; (c) …

    ottawa-retro Repository record for Electrochemistry and stoichiometry of thin film oxides on nickel. (opens in a new tab)

  15. Selective Oxidation and Reactive Wetting of 2Mn-Si Steels During Continuous Hot-Dip Galvanizing

    … and decrease in the thickness of external oxides, which is indicative of the occurrence of the transition from external to internal oxidation. Under this annealing condition, surface oxides were composed of thinner film-like MnSiO3, Mn2SiO4 and SiO2 oxides, compared to the 243 K (–50 °C) dp …

    mcmaster Repository record for Selective Oxidation and Reactive Wetting of 2Mn-Si Steels During Continuous Hot-Dip Galvanizing (opens in a new tab)

  16. Platinum oxide reduction kinetics on polycrystalline platinum electrodes

    … kinetic mechanism of Pt oxide reduction and surface oxide structures are proposed. The reduction reaction was studied by cyclic voltammetry (CV) and various potential programs that combine sweep and hold periods by an assembled analog instrumentation. The reduction peak was studied under …

    uvic Repository record for Platinum oxide reduction kinetics on polycrystalline platinum electrodes (opens in a new tab)

  17. Engineering of nanoscale antifouling and hydrophobic surfaces on naval structural steel HY-80 by anodizing

    … the spectrum of hydrophobic and antifouling surface patterns that can electrochemically be fabricated on HY-80 steel (alloy that is broadly used in shipbuilding for welded hull plates) is examined. After the fabrication of nanoscaled topographies, the optimum conditions for anodizing are …

    nps Repository record for Engineering of nanoscale antifouling and hydrophobic surfaces on naval structural steel HY-80 by anodizing (opens in a new tab)

  18. Investigations into the Formation of Carbonaceous Deposits via Autoxidation of Jet Fuels

    … yielding carbonaceous deposits on fuel-wetted surfaces. These deposits can cause efficiency and safety issues as they grow on critical components. The initial stage of the deposition process involves a well understood autoxidation mechanism, leading to a series of well characterized oxidized …

    whiterose Download PDF for Investigations into the Formation of Carbonaceous Deposits via Autoxidation of Jet Fuels (opens in a new tab)

  19. The oxidation of liquid aluminium and the potential for oxides in grain refinement of aluminium alloys

    … and their alloys readily react with air to form surface oxides and films. If they become entrained in a casting, they form double oxide film defects that reduce the mechanical properties of the component. It is important to determine the nature and behaviour of the films formed, so that defects …

    birmingham Download PDF for The oxidation of liquid aluminium and the potential for oxides in grain refinement of aluminium alloys (opens in a new tab)

Page 1 of 5