Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 24 for “"Surface polymerization"”.

  1. SURFACE POLYMERIZATION OF INORGANIC MATERIALS FOR RENEWABLE ENERGY, INTELLIGENT MATERIALS, AND BIO-MATERIALS APPLICATIONS

    Controlled radical polymerization techniques, such as atom transfer radical polymerization (ATRP) and reversible addition fragmentation chain transfer (RAFT) are discussed and used for surface grafting polymers onto inorganic substrates. The surface grafted polymer/inorganic materials can be used …

    unr Repository record for SURFACE POLYMERIZATION OF INORGANIC MATERIALS FOR RENEWABLE ENERGY, INTELLIGENT MATERIALS, AND BIO-MATERIALS APPLICATIONS (opens in a new tab)

  2. Development of a lower intestine targeting mucoadhesive platform of oral drug delivery

    … W/O/W emulsification solvent evaporation and surface polymerization methods. We then coated and employed mucoadhesive polymers into the carrier system to enhance the residence time in the targeted site. Also we developed our own in vitro mucoadhesion testing ramp as an evaluation tool. …

    texas Repository record for Development of a lower intestine targeting mucoadhesive platform of oral drug delivery (opens in a new tab)

  3. Hydrostatic 3D-Printing for Soft Material Structures Using Low One-Photon Polymerization

    … Hydrostatic 3D printing utilizes low one-photon polymerization (LOPP) to realize polymerization under the polymer resin surface, as opposed to surface polymerization in stereolithography (SLA). The cured part inside of the resin is then automatically supported by the hydrostatic pressure. A …

    tamu Repository record for Hydrostatic 3D-Printing for Soft Material Structures Using Low One-Photon Polymerization (opens in a new tab)

  4. Construction of an Initiated Chemical Vapor Deposition (iCVD) Reactor and Deposition of Polytetrafluoroethylene (Ptfe) Thin Films Using Perfluoro-1-Octanesulfonyl Fluoride as the Initiator

    Initiated Chemical Vapor Deposition (iCVD) is a surface polymerization technique that is different from other traditional chemical vapor deposition (CVD) techniques. iCVD is carried under a vacuum without the use of solvents, therefore eliminating contaminations. An initiator and a monomer are …

    mo-state Repository record for Construction of an Initiated Chemical Vapor Deposition (iCVD) Reactor and Deposition of Polytetrafluoroethylene (Ptfe) Thin Films Using Perfluoro-1-Octanesulfonyl Fluoride as the Initiator (opens in a new tab)

  5. Admicellar-polymerized thin elastomeric coatings for engineered interfaces for enhanced composite performance.

    A surface-polymerization technique known as admicellar polymerization has been evaluated as an alternative method to tailor the interfacial properties of glass/epoxy composite parts molded by resin transfer molding (RTM). Initially, small-scale polymerization reactions were carried out to …

    oklahoma-thes Repository record for Admicellar-polymerized thin elastomeric coatings for engineered interfaces for enhanced composite performance. (opens in a new tab)

  6. Preparation and Selected Applications of Functional Hydrogel Films Synthesized by Initiated Chemical Vapor Deposition (iCVD)

    … of applications. iCVD is a solvent-free, all-dry surface polymerization technique performed under vacuum. It is able to deposit conformal, pinhole-free thin films of application-specific polymers in a single step onto complex and porous structures. In iCVD, an initiator is activated to form free …

    cau-kiel Repository record for Preparation and Selected Applications of Functional Hydrogel Films Synthesized by Initiated Chemical Vapor Deposition (iCVD) (opens in a new tab)

  7. Improving capacitance and cyclability in microbial cellulose based ultracapacitors

    … to increase capacitance by serving as a high surface area substrate for conductive polymers and carbonaceous materials. Electrode surface area is a critical parameter in ultracapacitors because capacitance depends on the available active sites that are accessible to counter ions. Commercial …

    texas Repository record for Improving capacitance and cyclability in microbial cellulose based ultracapacitors (opens in a new tab)

  8. Advancement Of The In-Situ Polymerization Process For Glass Fiber/Nylon-6 Laminates With Nanographite Platelets

    The in-situ polymerization process of anionic polyamide-6 (APA-6) presents the opportunity for a new class of composite materials with excellent performance and wide applicability in the automotive, energy, transportation, and aerospace industries. Despite the inherent advantages of the process, …

    uab Repository record for Advancement Of The In-Situ Polymerization Process For Glass Fiber/Nylon-6 Laminates With Nanographite Platelets (opens in a new tab)

  9. Novel Approaches to Control Surface Reactions in Plasma Etching of Electronic Materials

    … include low materials etching selectivity, surface damage, roughness, and poor etching profile control. In this work, various aspects of low temperature plasma-based etching approaches are tailored for optimal plasma etching performance, including novel gaseous precursors for better control …

    maryland Repository record for Novel Approaches to Control Surface Reactions in Plasma Etching of Electronic Materials (opens in a new tab)

  10. Designed Polymer Brush Interfaces For Plutonium Separations And Polyethylene Nanocomposites

    Modification of surfaces with polymer brushes has become an important area of research for developing materials with a variety of advanced properties. Flat or continuous surfaces modified with polymer brushes can serve as surfaces where chemical reactions or separations take place, and discrete …

    south-carolina Repository record for Designed Polymer Brush Interfaces For Plutonium Separations And Polyethylene Nanocomposites (opens in a new tab)

  11. Metalloporphyrin Based Photocatalysts for PETRAFT Polymerization and Applications

    Photoinduced reversible-deactivation radical polymerization (photoRDRP), which utilizes light energy to initiate and control radical polymerization, has been widely applied in polymeric syntheses, such as antibacterial polymers, 3D printed materials, and self-assembled nanoparticles. Photocatalysts …

    unsw Repository record for Metalloporphyrin Based Photocatalysts for PETRAFT Polymerization and Applications (opens in a new tab)

  12. Plasma damaging process of porous ultra-low-k dielectrics and dielectric repair

    … plasma damage. First, the plasma etching induced surface roughening was studied on blanket porous SiCOH films in the fluorocarbon based plasma. Substantial surface roughening was found in the low polymerization region, where the surface roughening process was initiated by the unevenly distribution …

    texas Repository record for Plasma damaging process of porous ultra-low-k dielectrics and dielectric repair (opens in a new tab)

  13. A Cold Plasma-Enabled Reduction Process for the Fabrication of Metallic Nanostructures Onto Polymeric Biomaterials

    … nanoparticles and modification of material surfaces via functionalization, etching, and reactive coatings via surface grafting and surface polymerization. Recently the National Science Foundation (NSF) has funded $40 million to Alabama Universities (a consortium of 9 universities and a few …

    uab Repository record for A Cold Plasma-Enabled Reduction Process for the Fabrication of Metallic Nanostructures Onto Polymeric Biomaterials (opens in a new tab)

  14. Density Functional Theory (DFT) Studies of High-Pressure Hydrides and Superhard Carbon Materials

    … at ambient conditions, could be made by on-surface polymerization of graphene nanoribbons, followed by pressurization of the resulting 2D sheets. A family of multifunctional materials with tunable superconducting and mechanical properties could be derived from this phase by varying the sp2 …

    buffalo Repository record for Density Functional Theory (DFT) Studies of High-Pressure Hydrides and Superhard Carbon Materials (opens in a new tab)

  15. Synthesis and application of specifically sulfated carbohydrates containing methacrylate functionality

    … is varied among monomers such that upon polymerization, well defined sulfated carbohydrate containing polymers are produced. This will facilitate advances in the development of structure-activity relationships between sulfated carbohydrate polymers and their diverse biological activities. …

    umn Repository record for Synthesis and application of specifically sulfated carbohydrates containing methacrylate functionality (opens in a new tab)

  16. High Performance Nanostructured Phospho-olivine Cathodes for Lithium-ion Batteries

    … engineering (size reduction, element doping), surface modification (thickness and uniformity controlled carbon coating) and nanostructuring (nanocrystal aggregates, carbon network embedding, and porosity), the synergistic coupling of these features effectively enhanced the electrochemical …

    nus Repository record for High Performance Nanostructured Phospho-olivine Cathodes for Lithium-ion Batteries (opens in a new tab) Download file for High Performance Nanostructured Phospho-olivine Cathodes for Lithium-ion Batteries (opens in a new tab)

  17. Surface Monolayer Initiated Polymerization: A Novel Means of Fabricating Sub - 100 nm Features

    … to microlithography. In our approach, entitled Surface Monolayer Initiated Polymerization, polymer structures are formed on a surface by polymerizing a monomer in a patterned fashion using a self-assembled monolayer that can be locally activated to initiate the reaction. This process has been …

    gatech Repository record for Surface Monolayer Initiated Polymerization: A Novel Means of Fabricating Sub - 100 nm Features (opens in a new tab)

  18. Brush grafted membranes for protein immobilization.

    … of chloromethyl groups to the membrane surface acted as an initiator for surface polymerization of tert-butyl acrylate (tBA) monomer via surface initiated atom transfer radical polymerization (SI-ATRP) to poly-tert butyl acrylate (poltBA). Selective acid hydrolysis of the pol-tBA brushes …

    dcu Download PDF for Brush grafted membranes for protein immobilization. (opens in a new tab)

  19. Development of an Acid Gas Adsorbent for CO2 Removal with Increased Performance in the Presence of Moisture

    … within the vast pore volume of PE-MCM-41, surface grafting of various amino silane compounds, and finally, a novel approach of volume based amine functionalization (3D grafting). Application of pore-expanded MCM-41 (PE-MCM-41) mesoporous silica coated with …

    ottawa-retro Repository record for Development of an Acid Gas Adsorbent for CO2 Removal with Increased Performance in the Presence of Moisture (opens in a new tab)

  20. Growth and Characterization of Single Molecular Wires on Metal Surfaces

    … tunneling microscopy. The bottom-up approach "on-surface polymerization" was used to fabricate the moleculare wires. Two types of molecular wires are investigated in this thesis: porphyrin tapes and graphene nanoribbons. Steric hindrance limits the polymerization of the porphyrin-based molecules …

    fu-berlin Repository record for Growth and Characterization of Single Molecular Wires on Metal Surfaces (opens in a new tab)

Page 1 of 2