Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 238 for “"Surface profile"”.

  1. Estimation of Diffractive Surface Profile using Phase Retrieval Techniques

    … methods for estimating the diffractive surface profile of a multifocal diffractive IOL are investigated. Traditionally, several types of instruments have been proposed to determine the phase profile, such as conventional interferometers and Shack-Hartmann sensor. Holography-based setups …

    arizona-thes Repository record for Estimation of Diffractive Surface Profile using Phase Retrieval Techniques (opens in a new tab)

  2. Applying mobile boundary water surface profile models to coarse-bedded bridge crossings

    … produce lower bridge backwater elevations (water surface profiles) than those that fixed boundary models produce. This occurs when the bridge opening dominates the hydraulics at the crossing. To test for bridge dominance, the Froude value, Fu, upstream of the bridge site should not exceed the …

    washington Repository record for Applying mobile boundary water surface profile models to coarse-bedded bridge crossings (opens in a new tab)

  3. Robotic Surface Finishing of Curved Surfaces: Real-Time Identification of Surface Profile and Control

    … a complete design framework for robotic surface finishing of curved surfaces. The system setup is subdivided into three key components: Real-time surface registration is accomplished by employing a proximity laser sensor mounted on the robot end-effector. The proximity sensor measurements …

    tamu Repository record for Robotic Surface Finishing of Curved Surfaces: Real-Time Identification of Surface Profile and Control (opens in a new tab)

  4. The Development of Surface Profile Models in Abrasive Slurry Jet Micro-machining of Brittle and Ductile materials

    … using a newly developed ASJM system. Existing surface evolution models, previously developed for abrasive air jet machining (AJM), were evaluated and modified through the use of computational fluid dynamic (CFD) models for profile modeling of micro-channels and micro-holes machined with ASJM in …

    toronto-retro Repository record for The Development of Surface Profile Models in Abrasive Slurry Jet Micro-machining of Brittle and Ductile materials (opens in a new tab)

  5. Modeling and simulation of surface profile forming process of microlenses and their application in optical interconnection devices

    … this technology requires precise control of the surface profile of microlenses, which is a major technical challenge. The quality control of the surface profile of microlenses limits their applications. In this dissertation, the surface forming process of the out-of-plane microlenses in …

    lsu-thes Repository record for Modeling and simulation of surface profile forming process of microlenses and their application in optical interconnection devices (opens in a new tab)

  6. Analysis of form errors in rings of non-uniform cross section due to workholding and machining loads

    … for the prediction of final peak-to-valley (PTV) surface profile variation for face turning of rings of non-uniform cross section. An analytical method relates initial part form, part deflection during workholding and machining, and part elastic recovery to final PTV surface profile variation. …

    gatech Repository record for Analysis of form errors in rings of non-uniform cross section due to workholding and machining loads (opens in a new tab)

  7. Open Channel Overflow Diversion Structures with Side-Weirs

    … is written to compute the overflow and the water surface profile along the side weir. The hydraulics of flow over side weirs is reviewed in detail. The momentum approach is used in computing the water surface profile. The coefficient of discharge is estimated from a newly proposed relationship. A …

    mcmaster Repository record for Open Channel Overflow Diversion Structures with Side-Weirs (opens in a new tab)

  8. Two-dimensional separate-sided surface height profiling of lumber

    … point and line scanners is used to obtain a surface profile of the entire (two-dimensional) top and bottom surfaces of a lumber board. Each surface profile is independent of the other and free of data contamination caused by relative motions between the measured surface and sensors. Point …

    ubc Repository record for Two-dimensional separate-sided surface height profiling of lumber (opens in a new tab) Download PDF for Two-dimensional separate-sided surface height profiling of lumber (opens in a new tab)

  9. Simulation of flow in strip mine spoil

    … are obtained for the variation of the free surface and discharge at the outflow boundary. To test these numerical results, comparisons were made with actual field observations of the free surface. Good agreement between the calculated free surface profile and the observed free surface …

    ut-knoxville Repository record for Simulation of flow in strip mine spoil (opens in a new tab)

  10. Hydraulics of flow over labyrinth weirs

    … along the weir has been carried out:1. The water surface profile.2. The spill discharge and its coefficient.,3. The average velocity of water inside the labyrinth wpir upstream cycle and the spill velocity passing over the weir.4. The spill, angle of the flow passing over the weirs. 5 The momentum …

    soton Download PDF for Hydraulics of flow over labyrinth weirs (opens in a new tab)

  11. The effects of the insulator surface roughness on the surface flashover voltage of lucite, lexan, and celcon

    … in the past on the effects of the insulator surface roughness on the surface flashover voltage of insulators. The surface flashover voltages for several common electrical insulators have been investigated for several different surface roughness groups. Lucite, Lexan, and Celcon samples were …

    ttu Repository record for The effects of the insulator surface roughness on the surface flashover voltage of lucite, lexan, and celcon (opens in a new tab)

  12. Reduced-order modelling of thin-film flow over a spinning disk

    … a minor effect. Finally, control of the free surface towards a prescribed target free-surface profile in the outer region using the topography of the disk as the control mechanism is studied. At leading order, an exact solution for the topography is obtained and recovers the target …

    strathclyde Repository record for Reduced-order modelling of thin-film flow over a spinning disk (opens in a new tab)

  13. Mechanistic modeling of the effect of pavement surface texture and roughness on vehicle rolling resistance

    … and tire tread deformation. Pavement surface profile is one of the factors that influences the rolling resistance and it can be divided into four scales of roughness, mega-, macro- and micro-texture. These scales influence different mechanisms of the rolling resistance. The …

    msu Repository record for Mechanistic modeling of the effect of pavement surface texture and roughness on vehicle rolling resistance (opens in a new tab)

  14. Response of Bed Shear Stress in Open-Channel Flow to a Sudden Change in Bed Roughness

    … investigation into the behavior of the velocity profiles and bed shear stress during the transition from Rough to Smooth (RTS) and Smooth to Rough (STR) beds is undertaken. Experiments were conducted on smooth-to-rough (STR) and rough-to-smooth (RTS) transitions in an open channel flume under …

    sdstate Repository record for Response of Bed Shear Stress in Open-Channel Flow to a Sudden Change in Bed Roughness (opens in a new tab)

  15. Difrakcinių intraokulinių lęšių kompiuterinis modeliavimas /

    … optical properties of the computer modeling of surface profile of the different lenses and to consider these lens parameters. In order to reach object of the research to raise the following tasks: 1) Go to the intraocular correction of eye defects principles and techniques; 2) Go to the …

    vilnius Repository record for Difrakcinių intraokulinių lęšių kompiuterinis modeliavimas / (opens in a new tab)

  16. Optinės paviršiaus sekimo sistemos kūrimas lazeriniam mikroapdirbimui kūrimas bei galimybių įvertinimas /

    … is that it can process only a smooth surface profile containing material when no additional system is used. To process a curved surface profile containing element the process requires a programming for each different shape of an element. However, there are other ways to implement that …

    vilnius Repository record for Optinės paviršiaus sekimo sistemos kūrimas lazeriniam mikroapdirbimui kūrimas bei galimybių įvertinimas / (opens in a new tab)

  17. A combined high-order spectral and boundary integral equation method for modelling wave interactions with submerged bodies.

    … of submerged manuevering vehicles with the free surface is a topic of importance in ocean engineering. Present methods for estimating the forces and motions due to wave-body interactions are limited in their ability to efficiently compute forces and motions of interest when free surface slopes …

    nps Repository record for A combined high-order spectral and boundary integral equation method for modelling wave interactions with submerged bodies. (opens in a new tab)

  18. Optical measurement of surface profiles of silicon dioxide films on silicon substrates and carbon coatings on magnetic disks.

    Current models for recovering the surface profile from optical measurements are inadequate for characterizing surfaces with optically dissimilar regions. This limitation in the model is evidenced in optical measurements of silicon dioxide films on silicon substrates, and carbon films on magnetic …

    arizona-thes Repository record for Optical measurement of surface profiles of silicon dioxide films on silicon substrates and carbon coatings on magnetic disks. (opens in a new tab)

Page 1 of 12