Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 40 for “"Surface study"”.

  1. Response surface study of a characteristic chemical plant

    "Study of the return on investment response surface of a characteristic chemical plant indicates unimodality in the valid region, but the optimum design condition with this response surface is strongly affected by the correlation used for the investment. The method used for the design of this type …

    must-thes Repository record for Response surface study of a characteristic chemical plant (opens in a new tab)

  2. Surface study of niobium for superconducting radio frequency (SRF) accelerators

    Niobium rf superconductivity is a near-surface phenomenon because of the shallow rf penetration depth. Accordingly, the performance of Nb SRF accelerator cavities is strongly impacted by the topmost few nanometers interior surface, especially as impacted by the final surface conditioning …

    wm-mary Repository record for Surface study of niobium for superconducting radio frequency (SRF) accelerators (opens in a new tab)

  3. A fundamental surface study of phosphorus based antiwear films on iron

    … of phosphorus, by place exchange, into the subsurface region. From 495 to 640 K, films do not reach limiting thickness but grow with a temperature-dependent, near linear rate over several hundred Angstroms. These films are also structurally disordered and have optical constants that typically …

    soton Download PDF for A fundamental surface study of phosphorus based antiwear films on iron (opens in a new tab)

  4. Surface study of process contamination of plasma spray metal deposition process

    The purpose of the present study was to analyze the contamination which resulted from processing steps applied to substrate surfaces for the metal coating process known as plasma spray metal deposition. Additionally, the surface effects resulting from different solvent cleaning steps applied to a …

    rice Repository record for Surface study of process contamination of plasma spray metal deposition process (opens in a new tab)

  5. A Response Surface Study of Extruded Corn Starch/Skim Milk Powder Blends

    … and feed rates (control variables). Response surface methodology and a central composite in cube experimental design were used. This design required 30 experimental runs with 16 factorial points, 8 axial points, and 6 center points for replication. The physical and functional properties …

    utahstate Repository record for A Response Surface Study of Extruded Corn Starch/Skim Milk Powder Blends (opens in a new tab)

  6. Near-surface study of structure-property relationships in electrochemically fabricated multi-component catalysts

    … of developments and discoveries related to surface chemistry of controlled near-surface architectures. Through a combination of various X-ray spectroscopy techniques and innovative electrochemical fabrication techniques, valuable knowledge has been added to the fields of electrochemical …

    gatech Repository record for Near-surface study of structure-property relationships in electrochemically fabricated multi-component catalysts (opens in a new tab)

  7. Changes in the surface chemistry of enamel exposed to acid. A surface study of caries and erosion

    … sterile and non-sterile human primary tooth surfaces which have been subjected to acids of known pH occurs and can be detected in vitro and in situ with a simple and clinically applicable technique. A total of 219 human primary tooth surfaces were investigated in vitro. Of these, 110 sound …

    whiterose Download PDF for Changes in the surface chemistry of enamel exposed to acid. A surface study of caries and erosion (opens in a new tab)

  8. Surface Study of Volatile Organic Compounds (VOCs) Biomarkers Adsorption on Functionalized Graphene and its Application in FET Based Biosensors

    … ethyl butyrate, a biomarker for COVID-19. The surface of a graphene layer is engineered by manipulation of its surface structure and best cases are used as the channel of the GFET. Three methods, doping the crystal structure of graphene, decorating the surface with transition metals like …

    concordia Download PDF for Surface Study of Volatile Organic Compounds (VOCs) Biomarkers Adsorption on Functionalized Graphene and its Application in FET Based Biosensors (opens in a new tab)

  9. An SEM surface study of nucleate pool boiling heat transfer to saturated liquid nitrogen reduced pressures from 0.1 to 0.9

    "This study constituted an examination of both nucleate boiling and maximum heat flux characteristics of liquid nitrogen boiling from characterized surfaces. Several textures of gold plated copper surfaces were studied in addition to silver and silver oxide surfaces. Data were taken over a wide …

    must-thes Repository record for An SEM surface study of nucleate pool boiling heat transfer to saturated liquid nitrogen reduced pressures from 0.1 to 0.9 (opens in a new tab)

  10. Nuclear magnetic resonance study of the Pt-Rh bimetallic clusters

    We report the study of supported Pt-Rh bimetallic catalysts by 195Pt NMR and by 13C NMR of adsorbed CO. The metal particles are sA-soA in diameter. Study of the dependence of the 13CO resonance position as a function of Pt/Rh ratio and particle size shows that Rh is segregated to the surface. Study …

    uiuc Repository record for Nuclear magnetic resonance study of the Pt-Rh bimetallic clusters (opens in a new tab)

  11. Nuclear Magnetic Resonance Study of the Platinum - Rhodium Bimetallic Clusters

    We report the study of supported Pt-Rh bimetallic catalysts by $\sp{195}$Pt NMR and by $\sp $C NMR of adsorbed CO. The metal particles are 5A-50A in diameter. Study of the dependence of the $\sp $CO resonance position as a function of Pt/Rh ratio and particle size shows that Rh is segregated to the …

    uiuc Repository record for Nuclear Magnetic Resonance Study of the Platinum - Rhodium Bimetallic Clusters (opens in a new tab)

  12. CFD investigation of iced-wing performance degradation using DDES with the Spalart-Allmaras extension to consider roughness effects

    … can reduce the efficiency of aircraft lifting surfaces, which increases the cost of flight and risk of accidents. Experiments proved that even the onset of icing (increased roughness) could cause a reduction of 25% in the maximum lift, and an increase of 90% in drag of an aspect ratio 6 wing. …

    ets-quebec Download PDF for CFD investigation of iced-wing performance degradation using DDES with the Spalart-Allmaras extension to consider roughness effects (opens in a new tab)

  13. An Investigation of Electrostatic Interactions Between Organically Functionalized Silica Particles, Surfaces, and Metal Ions

    … between silica particles and either coated surfaces or metal ions. This work has two objectives: to begin a preliminary investigation into particle-surface systems that may be ideal for further investigation as a sensor and to investigate metal-ligand interactions for the potential use of …

    siu-theses Repository record for An Investigation of Electrostatic Interactions Between Organically Functionalized Silica Particles, Surfaces, and Metal Ions (opens in a new tab)

  14. Effective design augmentation for prediction

    In a typical response surface study, an experimenter will fit a first order model in the early stages of the study and obtain the path of steepest ascent. The path leads the experimenter out of this initial region of interest and into a new region of interest. The experimenter may fit another first …

    vt Repository record for Effective design augmentation for prediction (opens in a new tab)

  15. Computer Simulations of Li–N–H Systems

    … <p>The interactions of ammonia on the surface of lithium hydride represent the hydrogen formation step in the lithium amide-lithium hydride hydrogen storage system. The study of these interactions through DFT and MD simulations has led to new insights from geometric considerations of …

    oxford Repository record for Computer Simulations of Li–N–H Systems (opens in a new tab)

  16. Computational Modeling of Carboxylic-Based Organic Molecules for Li-Ion Battery Anode Materials

    … Li species is chosen based on a potential energy surface study of NTCDA. We carried out the process for 1-24 Li atoms, and 1-5 Li ions, by generating 100 conformers of each NTCDA and Li/Li+ configuration. We conducted DFT calculations employing PBE0 methodand def2-SVP basis set along with …

    buffalo Repository record for Computational Modeling of Carboxylic-Based Organic Molecules for Li-Ion Battery Anode Materials (opens in a new tab)

Page 1 of 2