Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"Surlyn"”.
-
A Surlyn® ionomer as a self-healing and self-sensing composite
The ionomer known by its trademark name as Surlyn has recently become an area of interest as it reportedly has the ability to self-heal. In this project, new techniques were employed to investigate three grades of Surlyn (PC2000, 9910 and 1706) with a view to the development of a self-healing and …
-
Puncture Reversal of Polyethylene Ionomers - Mechanistic Studies
… properties of the polymer. React-A-Seal® and Surlyn® are poly(ethylene-co-methacrylic acid) (EMAA) ionomer-based materials and Nucrel® is the EMAA acid copolymer neutralized to produce Surlyn®. React-A-Seal® , Surlyn® , and Nucrel® recover into their original shapes following a high impact …
-
Resistive heating for self-healing materials based on ionomeric polymers
… and apply current for resistive heating. Surlyn 8940 is chosen as the polymer matrix and carbon fibers are selected for the resistive heating elements. Methods for melt processing Surlyn are developed and used to produce Surlyn films and composite samples where carbon fiber is embedded in …
-
Self-Healing of Thermoplastic Poly(Ethylene-co-Methacrylic Acid) Copolymers Following Projectile Puncture
… of this class were examined, including DuPont™ Surlyn® 8920, Surlyn® 8940, Nucrel® 925, and Nucrel® 960. Though these differ in their amount of ionic content, all expressed a certain degree of self-healing. Thin films were prepared by a compression molding process and punctured at temperatures …
-
Bioinspired Ceramic Composites: Enhancing Performance through Hierarchical Structural Design
… laser-engraved tiles were then laminated with Surlyn® to produce bioinspired ceramic composites. Their mechanical behavior, including energy absorption, stiffness, and strength, was systematically evaluated under static and dynamic loading. Increasing the Surlyn® content promotes plastic …
-
I, Crystallization and morphological studies of ICI's intermediate temperature semicrystalline (ITX) polymer and, II, The influence of deformation (shear strain) during bond formation on adhesive bond strength
… hot-melt adhesives, Dow DAF® 821 and Du Pont Surlyn® 1601. Lap shear bonds were sheared (// or ⟂ to load) during preparation to induce molecular orientation within the adhesive, before the mechanical properties were evaluated. The measured DAF 821 tensile strengths were similar, however, the …
-
Formulation and Characterization of an Antimicrobial Coating Containing Nisin for Large Scale Food Package Converting Processes
… Bynel®2002; Elvax® 3165, Nucrel® 1202 HC and Surlyn® 1605) and wettability of the coating solution. All substrates were found to have statistically significantly different critical surface tensions from the control LLDPE substrate (ɑ = 0.05). All substrates except for corona treated Elvax® and …
-
Development and characterisation of polypyrrole composites
… were produced by adding PPy powders to Surlyn ionomer, styrene ethylene butylene styrene triblock copolymers (SEBS) and nitrile butadiene rubber (NBR) hosts. Changes in physical properties (including tensile strength and electrical conductivity) of PPy and carbon black filled composites …
-
Magnetic Induction for In-situ Healing of Polymeric Material
… of α-Fe₂O₃, and one supply of Ni-Zn Ferrite. Surlyn 8940 was selected as the bulk polymer due to its self-healing qualities[9]. A method for melt mixing the particulate with the polymer in various volume fractions was developed and an SEM was used to study the dispersion of the particulate. …
-
Polyelectrolyte Multilayers Containing Polyethylene-based Ionomers
… EMAA ionomer is a commercial material known as Surlyn having ethylene as the major component, and dissolved in THF at 65℃ but becomes a colloidal dispersion when temperature goes down to room temperature. Water soluble LPEI solution has a large and changeable range of ionization degree by …
-
Degradationsprozesse in Ru(bpca)2(NCS)2-sensibilisierten Farbstoffsolarzellen auf Titandioxidbasis
… von I2. Die Verklebung der Zellen mit Surlyn war bei langer Belichtung teilweise instabil. Die Klebefolie wurde vom Elektrolyten unterwandert, wodurch sich in der Zelle Luftblasen bildeten. Insgesamt gesehen hat keine der untersuchten Zellen eine Stabilität gezeigt, die einen Betrieb …