Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 48 for “"Suspension flow"”.

  1. Heat Transfer in Laminar Solid-Fluid Suspension Flow

    … of neutrally buoyant, concentrated polyethylene suspensions in silicone oil and kerosene mixture, and polystyrene suspensions in silicone oil and Freon 113 mixture were measured in a rotating Couette flow apparatus. Contrary to the case of single phase fluid, effective thermal conductivity was …

    uiuc Repository record for Heat Transfer in Laminar Solid-Fluid Suspension Flow (opens in a new tab)

  2. Suspension flow in porous media : investigating external and internal filtration

    Suspension flow through porous media pertains to many applications across different disciplines of engineering. This dissertation aims at advancing the fundamental understanding, characterization and prediction of the interactions between suspensions and porous media with a focus on geotechnical …

    texas Repository record for Suspension flow in porous media : investigating external and internal filtration (opens in a new tab)

  3. Examination of Fluid-Particle in Turbulent, Non-Dilute, Particle Suspension Flow

    … suspended in fully developed turbulent water flow in a vertical pipe (I.D. = 18.4 cm) have been conducted. An analytical model has been developed to predict the stochastic motion of particles in a non-dilute turbulent suspension flow. The model, incorporates hydrodynamic interaction between …

    uiuc Repository record for Examination of Fluid-Particle in Turbulent, Non-Dilute, Particle Suspension Flow (opens in a new tab)

  4. Assessment of a High Temperature Refractory-lined Suspension Flow Solar Particle Receiver

    The use of ceramic particles, alone or in suspension within an air stream, as a heat transfer medium is one of the current focussed areas for the development of high temperature receiver-based concentrated solar thermal technologies. These solid particle receiver systems have the potential to …

    adelaide Repository record for Assessment of a High Temperature Refractory-lined Suspension Flow Solar Particle Receiver (opens in a new tab)

  5. Turbulent Heat Transfer in Suspension Flow Under the Influence of a Pulsating Magnetic Field

    Made available in DSpace on 2014-12-05T19:16:01Z (GMT). No. of bitstreams: 1 6202916.pdf: 5019933 bytes, checksum: fbbdc030a09963caf64581329a4ebd72 (MD5) Previous issue date: 1962

    uiuc Repository record for Turbulent Heat Transfer in Suspension Flow Under the Influence of a Pulsating Magnetic Field (opens in a new tab)

  6. Measurement of fiber suspension flow and forming jet velocity profile by pulsed ultrasonic doppler velocimetry.

    The flow of wood fiber suspensions plays an important role during the pulp and paper manufacture process. Considerable research has been carried out in the past 50 years to characterize the fiber suspension flow behavior and to monitor the fiber suspension flow during paper manufacture. However, …

    gatech Repository record for Measurement of fiber suspension flow and forming jet velocity profile by pulsed ultrasonic doppler velocimetry. (opens in a new tab)

  7. Balancing rheology and filtration : a novel approach for optimizing suspension flow and sustainability in granular media

    … in recent years on the use of chemical and suspension grouts for ground improvement, however; field implementation has always been hindered by the in situ soil heterogeneity and discontinuities. In the field, there are many practices of grouting such as compaction grouting, jet grouting and …

    texas Repository record for Balancing rheology and filtration : a novel approach for optimizing suspension flow and sustainability in granular media (opens in a new tab)

  8. Particle Transport and Heat Transfer in Gas-Solid Suspension Flow Under the Influence of an Electric Field

    Made available in DSpace on 2014-12-09T17:13:37Z (GMT). No. of bitstreams: 1 6511837.pdf: 5885908 bytes, checksum: 4c9a41497f7ac66fbfa36c8f9475a9d5 (MD5) Previous issue date: 1965

    uiuc Repository record for Particle Transport and Heat Transfer in Gas-Solid Suspension Flow Under the Influence of an Electric Field (opens in a new tab)

  9. Simulations of pulsatile flow through bileaflet mechanical heart valves using a suspension flow model: to assess blood damage

    … exist, and thus blood damage that occurs in BMHV flows must be well understood. The aim of this research is to numerically study platelet damage that occurs in BMHV flows. The numerical suspension flow method combines lattice-Boltzmann fluid modeling with the external boundary force method. This …

    gatech Repository record for Simulations of pulsatile flow through bileaflet mechanical heart valves using a suspension flow model: to assess blood damage (opens in a new tab)

  10. Fibre modelling in venturi flow and disc refiner. Implementation and development of models for turbulent fibre suspension flow.

    … and paper industry a model for turbulent fibre suspension flow was needed. The model was also desired to be suitable for applications alongside additional multiphase flow models to study cavitation in fibre suspension flows. Two models with different levels of complexity were studied. A …

    chalmers Repository record for Fibre modelling in venturi flow and disc refiner. Implementation and development of models for turbulent fibre suspension flow. (opens in a new tab)

  11. A study of the modes of gas-solids flow in pipelines

    A variety of gas-solids flows can be observed in the pipeline of a pneumatic conveying system. These flows may be classified as one of three modes: i. suspension flow; ii. non-suspension moving-bed type flow; iii. non-suspension plug type flow. The modes of flow that a bulk material can achieve are …

    greenwich Download PDF for A study of the modes of gas-solids flow in pipelines (opens in a new tab)

  12. Measurement of properties of gas-solid suspensions using phase-Doppler anemometry

    A detailed investigation to quantify flow properties of a dense turbulent air-solid suspension in a horizontal pipe was undertaken. The flow properties were measured along vertical and horizontal diameters using Phase Doppler Anemometry which was a nonintrusive technique that measured the size and …

    uiuc Repository record for Measurement of properties of gas-solid suspensions using phase-Doppler anemometry (opens in a new tab)

  13. On site measurements of kraft pulp pump system efficiency

    … work concerns the on-site measurements of pulp-suspension pumping efficiency. This involves the measurement of pump head, flow rate and power consumption. Provided that consistent flow measurements are available, it is possible to reliably and non-invasively measure actual pump system …

    ubc Repository record for On site measurements of kraft pulp pump system efficiency (opens in a new tab) Download PDF for On site measurements of kraft pulp pump system efficiency (opens in a new tab)

  14. Continuum Modeling of Liquid-Solid Suspensions for Nonviscometric Flows

    A suspension flow model based on the "suspension balance" approach has been developed. This work modifies the model to allow the solution of suspension flows under general flow conditions. This requires the development of a frame-invariant constitutive model for the particle stress which can take …

    gatech Repository record for Continuum Modeling of Liquid-Solid Suspensions for Nonviscometric Flows (opens in a new tab)

  15. Improved permeability estimation of formation damage through imaged core flooding experiments

    … the petroleum industry. An experimental study of suspension flow into sintered glass bead plugs has been conducted, measuring the changes in permeability and porosity over the course of injection. Glass bead suspensions of bi-disperse combinations of particle sizes, total injection concentrations …

    texas Repository record for Improved permeability estimation of formation damage through imaged core flooding experiments (opens in a new tab)

  16. Modelling oxygen delignification in pulp processing operations

    … gas-liquid mass transfer resistances for pulp suspension mixing and pulp suspension flow through retention towers as measured in our laboratory. This thesis reviews the available kinetic and mass transfer data incorporated in the model and discusses several important issues related to model …

    ubc Repository record for Modelling oxygen delignification in pulp processing operations (opens in a new tab) Download PDF for Modelling oxygen delignification in pulp processing operations (opens in a new tab)

  17. Orientation and rotational diffusion of fibers in semidilute suspension

    … the microstructure and material properties of a suspension flow system. In this research a fiber-level, hybrid simulation method, LBM‒EBF (coupled lattice‒Boltzmann method with the external boundary force method) is undertaken to advance the current understanding of the hydrodynamic interaction …

    gatech Repository record for Orientation and rotational diffusion of fibers in semidilute suspension (opens in a new tab)

  18. Heat transfer in nano/micro multi-component and complex fluids with applications to heat transfer enhancement

    Thermal properties of complex suspension flows are investigated using numerical computations. The objective is to develop an efficient and accurate computational method to investigate heat transport in suspension flows. The method presented here is based on solving the lattice Boltzmann equation …

    gatech Repository record for Heat transfer in nano/micro multi-component and complex fluids with applications to heat transfer enhancement (opens in a new tab)

Page 1 of 3