Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Swaging"”.
-
Finite element simulation of swaging in thin-walled cylinders
Thesis (M.S.)--Michigan State University. Department of Materials Science and Mechanics, 1995
-
Aplicación del proceso de swaging para la generación de tensiones residuales en componentes sometidos a altas presiones
El procesado de alimentos por alta presión (HPP, High Pressure Processing) es una técnica relativamente nueva en la que los alimentos se someten a una presión muy elevada en el interior de una vasija. El presente trabajo pretende establecer una metodología y un procedimiento industrialmente viable …
-
Fabrication, microstructure and properties of a multifunctional titanium alloy
… sintering/hot forging/solution treatment/cold swaging) and to investigate the relationship between microstructural development during thermomechanical processing and properties. X-ray diffraction showed that the forged/solution treated alloy was -phase with transmission electron microscopy …
-
ADVANCING THE UNDERSTANDING OF SWAGED STRUCTURAL REACTIVE MATERIALS: A COMPREHENSIVE STUDY OF MECHANICAL PROPERTIES, FRAGMENTATION, AND PERFORMANCE
… innovative techniques such as rotary infeed swaging and ballistic launch studies. The research begins with a comprehensive review of the current state of structural reactive materials, highlighting their potential applications in defense and other industries. The methodology section details …
-
Microstructure-strength relationship of a deformation-processed aluminum-magnesium composite
… was deformation processed by extrusion, swaging and wire drawing. Two compositions, Al-13vol%Mg and Al-20vol%Mg were used to compare the influence of second phase content. The microstructure of the composites was convoluted, ribbon-shaped second phase Mg filaments in Al matrix, which …
-
Accuracy of the Indirect Method Evaluated by Mercury Micromeasurement
… should be less than two cubic millimeters before swaging and less than one cubic millimeter after swaging, when the technics used in this study are followed. Measurements on normal sized teeth, it will be recognized, should be less than two-thirds of the amounts found in these measurements. …
-
Microstructure-strength relationships of heavily deformed magnesium-lithium composites containing steel fibers
… were deformed by rolling or by extension and swaging. Mechanical properties, microstructure, and texture development of the composites were characterized at various levels of deformation. The HCP/BCC composites had limited formability at temperatures up to 400° C while the BCC/BCC composites …
-
Anisotropic Nature of Radially Strained Metal Tubes
… so that yield strength would increase. However, swaging introduces anisotropic strain, which may decrease the yield strength. This study measured the yield strength of strained material in the transverse and axial direction and compared them to raw material, to determine the amount of anisotropy. …
-
Micro-structural relationships of heavily deformed gold-silver and gold-platinum composites
… Au-Pt composites were deformation processed by swaging and subsequent wire drawing. Four compositions, Au-7vol.%Ag, Au-14vol.%Ag, Au-7vol.%Pt, Au-14vol.Pt, were investigated. After extensive cold reduction, the particles of the second phase were reduced in size and aligned parallel to the wire …
-
Kinetics of transformation in an in-situ aluminum-strontium deformation processed metal-metal composite
… The composite wire was created by extrusion, swaging, and wire drawing of bundled Al and Sr wires. Intermetallic compound formation between Al and Sr is of particular interest to produce a strong, conductive wire with good high-temperature strength. Samples of swaged and drawn Al-Sr composite …
-
Consolidation of copper and aluminum micro and nanoparticles via equal channel angular extrusion
… ductile materials, with high strength. Swaging of these consolidated powders produced samples which were softer and less ductile in tension, than the non-swaged samples. ECAE produced effective consolidation of Cu nanoparticles with average sizes of 100 nm, with an ultimate tensile …
-
Effect of twinning on texture evolution of depleted uranium using a viscoplastic self-consistent model
… processes, such as torsion, rolling, and swaging, are simulated and the theoretical textures, plotted as pole figures or inverse pole figures, are compared with previous experimental textures found for alpha uranium from previous experimental sources. A specific twin system, the (176)[512] …
-
Microstructure-strength relationships of heavily deformed Cu-based composites
… during processing (cold rolling, wire drawing or swaging) are the source of the strengthening. Composite strength is correlated to microstructural characteristics for arc melted Cu-20 vol.% Nb cold rolled up to a true strain of 6.9. During rolling Nb elongates and becomes ribbon-like while the Cu …
-
Microstructure and strength of a deformation processed Al-20%Sn metal-metal composite
… was deformation processed by extrusion, swaging, and wire drawing to a total true strain of 7.4, resulting in a microstructure with Sn filaments in an Al matrix. Both the size and spacing of the Sn filaments decreased as deformation processing progressed. Immediately after deformation, …
-
Al-Ca and Al-Fe Metal-metal Composite Strength, Conductivity, and Microstructure Relationships
… formed by mechanical working (i.e., rolling, swaging, or wire drawing) of two-phase, ductile metal mixtures. Since both the matrix and reinforcing phase are ductile metals, the composites can be heavily deformed to reduce the thickness and spacing of the two phases. Recent studies have shown …
-
Structure-property relationships in an Al matrix Ca nanofilamentary composite conductor with potential application in high-voltage power transmission
… and severe plastic deformation by extrusion and swaging. The fine Ca metal powders have been produced by centrifugal atomization with rotating liquid oil quench bath, and a detailed study about the atomization process and powder characteristics has been conducted. The microstructure of Al/Ca …
-
FRAGMENTATION PHENOMENA IN METALS UNDER HYPERVELOCITY IMPACT
… various processing. Results suggest that powder swaging may provide a method to produce metals that dynamically fragment more aggressively, with respect to distribution of fragment mass across size, than their quasi-static toughness would suggest. Finally, using a new impact driven target …
-
Influence of processing methods on microstructure and multiscale functional properties of nitinol
… forming processes include casting, hot rotary swaging, hot rolling, and cold drawing. The following aspects of the microstructure were taken into consideration: grain morphology (shape), grain size, grain boundary type, crystallinity, preferred grain orientation, precipitates, lattice defects, …
-
Microstructure-strength relationships of a deformation processed titanium-yttrium composite
… was cast and deformation processed by extrusion, swaging, and wire drawing to true strain 12.8. A similar ingot of pure Ti was cast and deformation processed to true strain 10.0 as a control specimen. Both compositions were annealed at 700°C. after every 60% reduction in area and examined by gas …
-
An Investigation of the Order-Disorder Transformation in the Nickel-29.1 Per Cent Molybdenum Alloy by Electrical Resistivity Measurements
… resistivity measurements were prepared by swaging (or rolling) and machining the homogenized ingots to approximately 0.1 inch diameter rods about 6 inches in length. Pretreatment of the alloy by quenching from above 868 degrees Celsius produced an initial state of retained alpha phase for …
Page 1 of 2