Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"Swept Volume"”.

  1. The flow approach to swept volume

    In this thesis, a method for representing swept volume based on the sweep differential equation and sweep vector field flow is developed. This method can be used to determine the boundary representation of a swept volume generated by any polygonal object undergoing a general smooth 2-D sweep. For …

    njit Repository record for The flow approach to swept volume (opens in a new tab)

  2. Late tracer data and swept volume prediction using peak tracer concentration

    … fields for the next step of the calculation of swept volume. The feasibility of using analytical solutions to estimate early data and check differences was carried out. In general; all of these applications refer to the applicability and relative ease of using tracers in oil field. The idea is …

    texas Repository record for Late tracer data and swept volume prediction using peak tracer concentration (opens in a new tab)

  3. Modeling of 3D swept volumes using sde/sede methods and its application to five-axis nc machining

    … solid modeling and manufacturing automation: (1) swept-volume modeling; (2) computer-based NC (Numerically controled) machining simulation and verification. The swept volume is defined as the volume swept by an object undergoing an arbitrary motion. Modeling of 3D swept volumes includes the …

    njit Repository record for Modeling of 3D swept volumes using sde/sede methods and its application to five-axis nc machining (opens in a new tab)

  4. Computer graphic simulation of sweeping of solid objects

    … is on the computer graphic simulation of the swept volume of a solid object undergoing Euclidean motions (including translation and rotation). The study helps visualize different types of Euclidean motions and supports the previously developed swept volume theories by providing graphic …

    njit Repository record for Computer graphic simulation of sweeping of solid objects (opens in a new tab)

  5. Interactive freeform solid modeling with haptic interface

    … method to compute the boundary of the tool swept volume, and based on the ray-casting method to perform Boolean operations between the tool swept volume and the virtual stock in dexel data to simulate the sculpting process. A new method for surface reconstruction from dexel data is …

    must-thes Repository record for Interactive freeform solid modeling with haptic interface (opens in a new tab)

  6. Modeling of deformed swept volumes with SDE and its applications to NC simulation and verification

    Representation of swept volumes has important applications in NC simulation and verification as well as robot-motion planning. Most research on .the representation of swept volumes has been limited to rigid objects. In this study, a sweep deferential equation (SDE) approach is presented for the …

    njit Repository record for Modeling of deformed swept volumes with SDE and its applications to NC simulation and verification (opens in a new tab)

  7. Efficient and accurate geometric simulation of multi-axis milling operations

    … to represent the boundary of the workpiece volume in a multi-level surface voxel representation for memory-efficient implementation. Frame-sliced voxels enables approximation of the workpiece surface to achieve sub-voxel details. This thesis further identifies an efficient three-step update …

    ubc Repository record for Efficient and accurate geometric simulation of multi-axis milling operations (opens in a new tab) Download PDF for Efficient and accurate geometric simulation of multi-axis milling operations (opens in a new tab)

  8. Affordance Judgment for Collision or Bypass of Objects by Rotating Panels

    … of collision to a person standing within the swept volume of the door, the ability to judge a safe distance from the door is imperative. The current study investigated the optical information available to judge whether a rotating panel would collide with or bypass a stationary object nearby. …

    clemson Repository record for Affordance Judgment for Collision or Bypass of Objects by Rotating Panels (opens in a new tab)

  9. Energy and paper recycling : an investigation of repulping

    … pulp type, temperature, consistency, repulper volume, and rotor design. It was found that a given material at a given temperature and consistency requires a unique quantity of energy to be repulped independent of the rate of energy addition. An analytical model for repulping linking pulp …

    ubc Repository record for Energy and paper recycling : an investigation of repulping (opens in a new tab) Download PDF for Energy and paper recycling : an investigation of repulping (opens in a new tab)

  10. Cutter-workpiece engagement identification in multi-axis milling

    This thesis presents cutter swept volume generation, in-process workpiece modeling and Cutter Workpiece Engagement (CWE) algorithms for finding the instantaneous intersections between cutter and workpiece in milling. One of the steps in simulating machining operations is the accurate extraction of …

    ubc Repository record for Cutter-workpiece engagement identification in multi-axis milling (opens in a new tab) Download PDF for Cutter-workpiece engagement identification in multi-axis milling (opens in a new tab)

  11. Systematical Studies of Mechanisms of Multi-thermal Fluid Stimulation for Heavy Oil Recovery

    … is shown to enlarge the radius of a thermally swept volume, reduce heat loss, and increase formation energy. On the other hand, the total enthalpy carried by this process drops slightly. Finally, a scope of applications of the MTFS is established.

    calgary Repository record for Systematical Studies of Mechanisms of Multi-thermal Fluid Stimulation for Heavy Oil Recovery (opens in a new tab)

  12. Flow studies in an in-line high shear mixer

    … from the secondary stator and within the rotor swept volume. Moreover, it was also conveyed that different flow regimes (laminar, transitional and turbulent) could simultaneously occur at localised areas of the mixing head, implying important consideration of several droplet break up mechanisms. …

    birmingham Download PDF for Flow studies in an in-line high shear mixer (opens in a new tab)

  13. Computational studies of homogeneous charge compression ignition, spark ignition and opposed piston single cylinder engines

    … piston engine whilst maintaining a constant swept volume, port geometry and combustion timing, shows an increase of heat losses due to the lower ratio of exposed surface area to volume; an increase in thermal and mechanical efficiency; and most importantly, an improvement in fuel consumption. …

    birmingham Download PDF for Computational studies of homogeneous charge compression ignition, spark ignition and opposed piston single cylinder engines (opens in a new tab)

  14. Modeling and Application of Tracers for Reservoir Characterization

    … ratios. We next investigated the accuracy of the swept volume calculated from the first-moment method using tracer production data from an interwell tracer test in a heterogeneous reservoir. Results of swept volume calculated from the first-moment method of tracer production data are compared with …

    texas Repository record for Modeling and Application of Tracers for Reservoir Characterization (opens in a new tab) Restricted access

  15. Triangle-mesh based cutter-workpiece engagement extraction for general milling processes

    … adopts ball pivoting algorithm for cutter swept volume generation. Octree space partition method is applied to speed up triangle-to-triangle intersection calculation which is used for Boolean operation between meshes. The reported method has been tested on several case studies of different …

    ubc Repository record for Triangle-mesh based cutter-workpiece engagement extraction for general milling processes (opens in a new tab) Download PDF for Triangle-mesh based cutter-workpiece engagement extraction for general milling processes (opens in a new tab)

  16. Feature-based methodologies for milling process modeling in Virtual Machining

    … based approach is developed for generating the swept volume for in-process workpiece modeling. A Multi-Agent System based framework is developed to improve efficiency of the CWE calculation, by parallelizing computational activities and utilizing free resources over a network.

    ubc Repository record for Feature-based methodologies for milling process modeling in Virtual Machining (opens in a new tab) Download PDF for Feature-based methodologies for milling process modeling in Virtual Machining (opens in a new tab)

  17. A composite tracer analysis approach to reservoir characterization

    … rigorous formulation and accurate estimates of swept volume and average saturation of bypassed oil. The inverse modeling infers permeability and saturation distribution by matching the tracer response. An extremely effective approach to the inverse modeling methods computes sensitivities based …

    tamu Repository record for A composite tracer analysis approach to reservoir characterization (opens in a new tab)

  18. Design and Analysis of Robotically-Controlled Minimally Invasive Surgical Instruments

    … is limited by friction between moving parts, the volume occupied by the end effector, and manufacturing and assembly constraints. The objective of this work is to develop and analyze concepts that can be used in robot-assisted needlescopic surgery. The concepts are intended for instrument shafts …

    byu Repository record for Design and Analysis of Robotically-Controlled Minimally Invasive Surgical Instruments (opens in a new tab) Download PDF for Design and Analysis of Robotically-Controlled Minimally Invasive Surgical Instruments (opens in a new tab)

  19. oai:calhoun.nps.edu:10945/10914

    … between potential-based propeller codes and volumetric Reynolds-Averaged Navier-Stokes codes, a general analytic method based upon an elliptic integral method for the velocity induced by a vortex ring of unsteady harmonic strength to compute of the time-averaged induced velocities in the …

    nps Repository record for oai:calhoun.nps.edu:10945/10914 (opens in a new tab)

  20. Wheel Envelope Methodology

    … process. A Wheel envelope represents the maximum swept volume of a wheel according to the agreed standards and methods. The aim of this master thesis was to realize the concept of a wheel envelope and develop an analytical method for the wheel envelope development. Knowledge of parameters which …

    chalmers Repository record for Wheel Envelope Methodology (opens in a new tab)

Page 1 of 2