Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"Swirl Number"”.
-
An experimental investigation of the effects of swirling air flows on the combustion properties of a solid fuel ramjet motor
… ramjet were conducted with different air inlet swirl. Cold flow measurements of the air flow at the exit plane of the tube-in-hole injector were used to determine the Swirl Number for each configuration. Regression rates of an HTPB type fuel at low air mass flux were found to increase with swirl …
-
Numerical Fluid Dynamics and Combustion Study of Emulsified Canola Oil Droplets in a Swirl Promoted Combustion Chamber
… characteristics of SVO, a multiple vane swirler has been adapted and used inside a conventional combustion chamber to enhance the mixing between the emulsified SVO fuel blend and the surrounding flowing air. However, the effects of vortex generation and droplet distribution on combustion …
-
Characterization and Combustion Performance of Corn Oil-Based Biofuel Blends
… and study the effects of equivalence ratio, swirl number, and fuel composition on emissions. Used corn oil blends exhibited better combustion performance than fresh corn oil blends, due in part to the higher unsaturation levels in fresh corn oil. NOx emissions for used corn oil increased with …
-
Development of a Single-Point SV-LDI-1 System: A Benchmark Study for Future Experiments
… defining trends in SPL as a function of ER and swirl number (SN), and generating operability maps that describe testing conditions for future experiments with the rig. A modular redesign of the rig, including upgrades to the fuel injector, swirler, and data acquisition systems, enabled …
-
Burner geometry effect on the stability of a swirling premixed biogas flame
… surrounded by an annulus through which a swirling premixed biogas stream discharges into an atmospheric combustion chamber. Two different burner geometries were tested; a 43.5 mm long cylindrical or conical with an angle of 15 degrees, with the bluff-body was either flushed with the exit …
-
3D Numerical Simulation to Determine Liner Wall Heat Transfer and Flow through a Radial Swirler of an Annular Turbine Combustor
… of a gas turbine annular combustor with radial swirlers, over a Reynolds number range from 50,000 to 840,000. A three dimensional hybrid mesh of around twenty five million cells is created for a periodic section of an annular combustor with a single radial swirler. Different turbulence models …
-
Dynamics of Lean Direct Injection Combustors
… Sauter mean diameter. Next, while varying the swirl number and the venturi geometry of the combustor, the evolution of the flow field will be characterized. An in-house innovation called the Direct Rotation Swirler (DRS) is built for this purpose. The DRS uses an active geometry to provide …
-
Large Eddy Simulations of high Reynolds number Complex Flows with Synthetic Inlet Turbulence
… combustors, which operate at high Reynolds numbers and high Swirl numbers. LES has several challenges which need to be surmounted for general application to complex high Reynolds number turbulent flows. The primary challenge in wall bounded flows is the need for very fine grids in the …
-
Aerodynamics and modelling of vane-swirled flames in furnaces
Swirl produces notable effects on flames, generally making them shorter and highly stable over a wide range of air and fuel flows. One common method of generating a swirling jet is to employ a vane swirler. In this work the aerodynamics of vane-swirled premixed town gas-air flames are investigated …
-
Experimental Characterization of Canola Oil Emulsion Combustion in a Modified Furnace
… of different methanol-in-canola oil emulsions, swirl angle and equivalence ratio on the emission levels of NOx, unburned hydrocarbons (UHC), CO and CO2. The 30 kW furnace facility available at Coal and Biomass Energy Laboratory at Texas A & M University was modified using a twin fluid atomizer, …
-
Helical Models of the Bidirectional Vortex in a Conical Geometry
… vortex-driven combustion chambers and the swirling flow through conical devices. Both solutions are derived from first principles and Euler’s equations of motion which showcase the stream function-vorticity relation and ultimately transforms into the Bragg-Hawthorne formulation. The …
-
Numerical and experimental investigation of UV LED water treatment reactor
… the first comprehensive investigation of swirl-enhanced flow dynamics in commercial-scale UV LED reactors through integrated computational and experimental approaches. A validated CFD model was developed using ANSYS CFX with SST turbulence modeling, coupled with ray-tracing optical …
-
The Development of a Monitoring and Control System for a Pulverised Coal-Fire Burner Using Neural Network Approach
… experiments systematically varied the burner swirl number and the secondary airflow rate over a significant range for two different coals so that both "satisfactory" and "poor" combustion conditions were obtained. The infrared emissions from the flame, the combustion noise and the acoustic …
-
An investigation of swirling flow mixing for application in an MHD pulverized coal combustor using isothermal modeling
… to investigate combustor reactant mixing with swirling oxidizer flow. The combustor configuration that was considered was designed to simulate a 4 lbm/sec mass flow pulverized coal combustor being tested in The University of Tennessee Space Institute MHD Facility. A one-fourth dimensionally …
-
Combustion aerodynamics and pollution formation in gas-fired furnaces
… aerodynamics and pollutant formation in confined swirling flames. The fuel used in this study was natural gas. In the experimental part of the work, two fuel injection modes are examined as alternatives to the conventional central axial fuel injection mode. These alternatives are (a) introducing …
-
Experimentatal and Numerical Investigation of Turbojet Engine Performance, Emissions, and Noise/Vibrations Using Jet-A and F24 Fuel
… Furthermore, numerical analysis showcased the swirl effect produced by guide vanes and rotors. The increase in engine speed enhanced the swirl number of the air and resulted in more efficient combustion, as identified through the temperature, velocity, and fuel mass fraction contours. TKE …
-
Inter-scale energy transfer in turbulent premixed combustion
… ratio, the jet flow velocity, and the swirl number. The impact of these controlling parameters on turbulence production and energy backscatter is assessed through the analysis of filtered kinetic energy transport equations. Tomographic particle image velocimetry (TPIV) and planar laser …
-
Design Optimization and Combustion Simulation of Two Gaseous and Liquid-Fired Combustors
… combustion efficiency by changing the inlet air swirl number and burner quarl angle in a furnace. OpenFOAM is used to model the steady-state combustion of natural gas in the 300 KW BERL combustor. The main barrier to applying optimization in the design of industrial combustion equipment is the …
-
Swirling jets for the mitigation of hot spots and thermal Sstratification in the VHTR lower plenum
… state-of-the-art turbulence models and advanced swirling jet technology to mitigate the two issues. The primary research goals were to increase the heat transfer and mixing capacity of swirling jets, extend swirling jet theory, and to apply those advancements for the mitigation of the …
-
Flow Field and Soot Formation Characteristics in Swirl-stabilized Non-premixed Turbulent Flames
… were investigated experimentally in turbulent swirl-stabilized non-premixed flames using three different fuels: methane, ethanol and aviation Jet A-1. The studied flames were confined and stabilized in a model gas turbine combustor with a swirl number of ~0.55. Soot volume fraction, fv, and …
Page 1 of 2