Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 55 for “"Switching Converter"”.
-
An improved switching converter model
The nonlinear modeling and analysis of dc-dc converters in the continuous mode and discontinuous mode has been done by averaging and discrete-sampling techniques. The averaging technique is simple to use and averages the output voltage. The discrete technique is very complex and cumbersome, but …
-
Modeling of Sic Power Semiconductor Devices For Switching Converter Applications
… Infineon. SiC devices hold the promise of faster switching speed compared to Si devices, which can lead to superior converter performance, because the converter can operate at higher switching frequencies with acceptable switching losses, so that passive filter size is reduced. However, the …
-
Investigation Of A Floating Load Buck Dc-Dc Switching Converter
A floating load buck DC-DC switching converter was analyzed, simulated, designed and prototyped. The floating load buck converter is first compared to the conventional buck converter. It was found that both the floating load buck converter and conventional buck converter exhibit similar conversion …
-
Analysis and optimal design of a resonant switching converter for space applications.
The design of converters for space applications is subject to a number of unusual constraints, such as low volume and weight, high efficiency operation, minimum components stress, low noise interference and resistance to ionizing radiation. The diode clamped series resonant converter (DCSRC) can be …
-
Modeling and Loss Analysis of SiC Power Semiconductor Devices for Switching Converter Applications
… by the available power semiconductor devices. Switching power converter topologies, modes of operation, switching frequencies, passive filtering elements are chosen based on the switching and conduction characteristics of power semiconductor devices. In recent times new wide bandgap power …
-
Analysis, design and control of a hybrid multilevel switching converter for synchrotron ring-magnet power
… presents the development of a Hybrid Multilevel Switching Converter (HMSC) for Ring-Magnet Power Supplies (RMPS). The thesis includes the analysis, design and control of the proposed converter. It introduces multilevel switching converters to the field of ring-magnet power supplies. RMPS feed the …
-
Optimization of the PWM Switching Algorithm and the Output Filter of a Full Bridge Zero Voltage PWM Switching Converter
… is done. This is done by employing a variable switching frequency (VSF) algorithm to ensure the soft switching of a full bridge zero voltage PWM switched converter while keeping the output waveform quality. Also a reduction of the wire losses of the output filter inductor has been achieved by …
-
Highly efficient supply modulator for mobile communication systems
Switching frequency modulation techniques, an inductor current sensing circuit for fast switching converter, and a dual converter are proposed, and the simulation results and experimental results are drawn. The experimental results for monotonic and pseudo-random modulation techniques show that the …
-
Modeling and Design of a Monolithic High Frequency Synchronous Buck with Fast Transient Response
… monolithic integration. Comparing with discrete switching DC-DC converter, monolithic integration brings a number of benefits and new design challenges. Besides monolithic integration, high switching frequency is another trend for power management ICs due to its higher bandwidth and the ability …
-
The modeling of a self-oscillating DC-to-DC converter
… oscillating current-or-voltage step-up dc-to-dc converter. Expressions are given that predict the operation of the converter in the time domain and in the state plane. To verify these expressions, a large signal computer simulation technique [1] is used to compare theoretical results with actual …
-
Design, simulation and evaluation of two different topologies for the 2.4 MW 4/6 kV DC-DC fullbridge converter
In this thesis, a hard switched and zero-voltage switching fullbridge converter for high power applications are compared in terms of their losses. Important issues in designing these kind of converters are to achieve high efficiency with low cost and low weight. Managing the converter parasitics …
-
A Selective Polarity DC-DC Converter with Virtually Infinite Voltage Levels
This research introduces a new design of a converter modified from SEPIC converter (Single end primary inductive converter), capable of generating desired voltage levels and polarities. The new switching converter topology allows for boost and buck of the input voltage theoretically achieving …
-
The New Active Output Filter for Variable Speed Constant Frequency Aerospace Applications
… Filter” (AOF) for performing output filtering in switching converter is proposed. The methodology is based on voltage harmonic injection via a combination of H Bridge and minimized LC filter to cancel out the odd harmonics from a 400Hz square wave 3 phase inverter to achieve a pure sinusoidal …
-
A LYAPUNOV BASED APPROACH TO ENERGY MAXIMIZATION IN RENEWABLE ENERGY TECHNOLOGIES
… of a photovoltaic (PV) array panel, dc-to-dc switching converter, charging a battery is considered wherein the environmental conditions are time-varying. A backstepping PWM controller is developed to maximize the power of the solar generating system. The controller tracks a desired array …
-
Introduction of a current waveform, waveshaping technique to limit conduction loss in high-frequency dc-dc converters suitable for space power
… highly efficient power supplies by increasing switching frequency. Incorporation of a power MOSFET as a switching element alleviates switching loss. However, values of R sub DS(on) (drain-to-source resistance in the on-state) for MOSFET's are of such magnitude to produce greater on-state losses …
-
Framework for calculating Root-Mean-Squares of state variables in power electronic converter models
… to enhance the simulation performance of switch converters, motivated by the pursuit of more efficient energy conversion. This thesis offers improvements in the cyclic-mode model simulation of converters. Initially, a comprehensive review from the classification and operating principles of switch …
-
Three-Phase Single-Stage Isolated AC–DC Converters for Electric Vehicle Battery Charging
… two three-phase single-stage isolated ac–dc converters for electric vehicle battery charging. Both converters integrate input-current shaping, high-frequency isolation, and constant-current/constant-voltage (CC/CV) output regulation within a single power-conversion stage. The first topology …
-
Topics in large-signal behavior of power electronic converters and systems
… explored. First, the load-sharing problem for converters with parallel- and series-connected outputs is defined and explained. Requirements for load-sharing behavior are illustrated graphically. Many classes of switching converters are capable of load-sharing aside from current-programmed-mode …
Page 1 of 3