Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"Switching element"”.

  1. Switching element design for BISDN

    … ISDN ATM switch. Architectural options for the switching elements of a delta network are identified. Formulas are developed which analyze the throughput and delay performance of delta networks composed of switching elements based on these architectures. The formulas are more general than those …

    uvic Repository record for Switching element design for BISDN (opens in a new tab)

  2. MSM photodiode as the switching element in a photoswitch-based class E microwave power amplifier

    A photoswitch is designed for use as the switching element in a 2 GHz class E amplifier. The application of this amplifier is as the final-stage amplifier in the transmit-receive module of a phased-array radar system. The goal of the photonic design, the use of a photoswitch in place of the typical …

    missouri Repository record for MSM photodiode as the switching element in a photoswitch-based class E microwave power amplifier (opens in a new tab)

  3. Introduction of a current waveform, waveshaping technique to limit conduction loss in high-frequency dc-dc converters suitable for space power

    … highly efficient power supplies by increasing switching frequency. Incorporation of a power MOSFET as a switching element alleviates switching loss. However, values of R sub DS(on) (drain-to-source resistance in the on-state) for MOSFET's are of such magnitude to produce greater on-state losses …

    nps Repository record for Introduction of a current waveform, waveshaping technique to limit conduction loss in high-frequency dc-dc converters suitable for space power (opens in a new tab)

  4. Analysis and Optimization of a Banyan Based ATM Switch by Simulations

    … to create a broadband (high speed) packet switching network capable of transporting wide variety of services including voice, video and data in an integrated manner. The main concern in designing the switching fabrics used in this technology are speed, throughput, delay and variance of …

    portland-state Repository record for Analysis and Optimization of a Banyan Based ATM Switch by Simulations (opens in a new tab)

  5. Information theoretic aspects of the reliability of binary switching networks.

    … subject of this thesis is the analysis of binary switching networks. Many schemes for improving the performance of an unreliable binary switching element (gate) have been advanced. Only those relying on the combination of many unreliable gates into a more reliable network---performing the original …

    ottawa-retro Repository record for Information theoretic aspects of the reliability of binary switching networks. (opens in a new tab)

  6. Wide-Band Gap Devices for DC Breaker Applications

    … the use of wide-band gap devices as the switching element in a semiconductor DC breaker. It involves the design of an efficient semiconductor DC breaker, its simulation in SPICE, construction of a hardware prototype and the comparative study of SiC and Si versions of the aforementioned …

    calpoly Repository record for Wide-Band Gap Devices for DC Breaker Applications (opens in a new tab)

  7. Multistage interconnection networks : improved routing algorithms and fault tolerance

    … systems are optimal in terms of the number of switching element, but the routing algorithms used to set up these networks are suboptimal in terms of time. The network set-up time and reliability are the major factors to affect the performance of multistage interconnection networks. This work …

    njit Repository record for Multistage interconnection networks : improved routing algorithms and fault tolerance (opens in a new tab)

  8. NEW APPROACHES TO WIDEBAND RF SWITCHING IN SILICON-GERMANIUM TECHNOLOGY

    … making them suitable for wideband RF switching transistors with low insertion loss. Despite the available performance, the effective utilization of SiGe HBTs as RF series switches remains largely unexplored. The research presented in this dissertation introduces a novel RF series …

    gatech Repository record for NEW APPROACHES TO WIDEBAND RF SWITCHING IN SILICON-GERMANIUM TECHNOLOGY (opens in a new tab)

  9. Performance Analysis of A Banyan Based ATM Switching Fabric with Packet Priority

    … Transfer Mode ( A TM ) concept, various switching architectures have been proposed. The multistage interconnection networks have been proposed for the switching architecture under the A TM environment. In this thesis, we propose a new model for the performance analysis of an A TM …

    portland-state Repository record for Performance Analysis of A Banyan Based ATM Switching Fabric with Packet Priority (opens in a new tab)

  10. Computer Solution of a Silicon Controlled Rectifier Circuit

    … shown on page 10. The SCR used as the output switching element was kept on during line current reversal by a capacitor from the gate of the SCR to cathode. It was desired to analyze the gate "hold on" circuit to be able to optimize that part of the circuit and learn the parameters necessary to …

    marquette Repository record for Computer Solution of a Silicon Controlled Rectifier Circuit (opens in a new tab)

  11. SVPWM SWITCHING PATTERN FOR Z-SOURCE INVERTER, SIMULATION AND APPLICATION

    … the Z-source topology hardware design can reduce switching element, entire system size and weight, minimize the system cost and increase the system efficiency. Also, a modified space vector pulse-width modulation (SVPWM) control method has been selected with the Z-source network together to …

    mtu Repository record for SVPWM SWITCHING PATTERN FOR Z-SOURCE INVERTER, SIMULATION AND APPLICATION (opens in a new tab)

  12. Performance analysis of augmented shuffle exchange networks

    … obtained by providing redundant links between switching elements within a stave (intra-stage links), thereby increasing the switching element complexity. The techniques used in the construction of this network, its properties, advantages, and disadvantages are discussed. While early studies …

    vt Repository record for Performance analysis of augmented shuffle exchange networks (opens in a new tab)

  13. Hypergraph-Based Interconnection Networks for Large Multicomputers

    … networks namely topology, technology, switching method, and routing algorithm. It argues that a new class of regular low-dimensional hypergraph networks, the distributed crossbar switch hypermesh (DCSH), represents a promising alternative high-performance interconnection network for …

    glasgow Download PDF for Hypergraph-Based Interconnection Networks for Large Multicomputers (opens in a new tab)

  14. SiC Band Gap Voltage Reference for Space Applications

    … electronic systems use high efficiency SMPS [switching mode power supplies].</p> <p>Currently, there exists SiC [silicon carbide] based electronics that is state of the art for high temperature applications. Commercial manufacturers at this time produce SiC Power MOSFETs [Metal Oxide …

    ut-knoxville Repository record for SiC Band Gap Voltage Reference for Space Applications (opens in a new tab)

  15. Electronic and Optoelectronic Properties of Two-Dimensional Heterostructures for Next-Generation Device Technologies

    … and gold (Au), which behaves as a resistive switching element (RSE). RSEs are microelectronic switches whose resistances depend on the history of electrical stimuli they have experienced. Prototype computer memory cells utilizing RSEs have demonstrated non-volatile switching behavior and high …

    ucf Repository record for Electronic and Optoelectronic Properties of Two-Dimensional Heterostructures for Next-Generation Device Technologies (opens in a new tab)

  16. Polymeric waveguide optical switches based on electrooptic and thermooptic beam deflectors integrated with etched TIR mirrors

    … characterized to evaluate their potential as a switching element in fully integrated devices. In the electrooptic beam deflector, an array of prism-shaped electrodes formed on the top of the waveguide induces selective refractive index change in the core polymer layer by Pockels effect, which …

    texas Repository record for Polymeric waveguide optical switches based on electrooptic and thermooptic beam deflectors integrated with etched TIR mirrors (opens in a new tab) Restricted access

  17. Switching and error recovery in terabit ATM networks

    … an efficient error recovery protocol are the key elements in building a reliable terabit ATM network. In this thesis, a terabit switch architecture and a reliable end-to-end error recovery protocol for terabit networks are introduced. The proposed terabit ATM switch architecture is designed to …

    uvic Repository record for Switching and error recovery in terabit ATM networks (opens in a new tab)

  18. Πλασμονικές (DLSPP) διατάξεις ολοκληρωμένες σε πυρίτιο (Si) για οπτικά δίκτυα διασύνδεσης υπολογιστικών συστημάτων

    … experimental demonstration of active plasmonic elements based on DLSPP waveguides for on-chip switching configurations. The great promise of the proposed DLSPP switching concept is the ultra-high throughput, small footprint and low power consumption. The implementation path is based on the …

    greece Repository record for Πλασμονικές (DLSPP) διατάξεις ολοκληρωμένες σε πυρίτιο (Si) για οπτικά δίκτυα διασύνδεσης υπολογιστικών συστημάτων (opens in a new tab)

  19. Ολοκληρωμένοι οπτικοί δρομολογητές για οπτικά δίκτυα διασύνδεσης υπολογιστικών συστημάτων

    … is required in order to dynamically control the switching elements during routing operation. Initially, circuit-level models of the two main building blocks of the proposed hybrid router were developed, namely the ring-based plasmonic switch and the ring-based SOI multiplexers. Then, these …

    greece Repository record for Ολοκληρωμένοι οπτικοί δρομολογητές για οπτικά δίκτυα διασύνδεσης υπολογιστικών συστημάτων (opens in a new tab)

  20. Mechanisms, Conditions and Applications of Filament Formation and Rupture in Resistive Memories

    … memory (RRAM), based on a two-terminal resistive switching device with a switching element sandwiched between two electrodes, has been an attractive candidate to replace flash memory owing to its simple structure, excellent scaling potential, low power consumption, high switching speed, and good …

    vt Repository record for Mechanisms, Conditions and Applications of Filament Formation and Rupture in Resistive Memories (opens in a new tab)

Page 1 of 2