Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"Sylgard"”.
-
Investigação do fenômeno redução de arrasto em superfícies de Sylgard® 184 modificadas por plasma
… investigated the drag reduction phenomenon in Sylgard® 184 elastomer surfaces and modified by the plasma treatment at low pressure. Atmospheres with 40% and 60% of argon and 20% and 80% of acetylene were used, varying in treatment times of 10, 15 and 30 minutes of acetylene exposure. The …
-
Efeito das propriedades físicas, químicas e morfológicas na redução de arrasto do Sylgard 184 modificado por plasma no escoamento laminar
… As alterações promovidas na superfície do Sylgard® devido a deposição de substância como: acetileno, argônio e oxigênio, através do tratamento a plasma tem apresentado o fenômeno de redução de arrasto em superfícies cilíndricas propostos em diâmetros e comprimentos predefinidos. A redução …
-
Quaternary Ammonium Cation bis-MPA Dendron PDMS Hybrid Copolymers: Synthesis, Characterization, Behavior And Functional Use As Macromolecular Additives In Sylgard 184
… as surface active macromolecular additives in Sylgard 184? In attempts to answer this question several steps were taken: • Synthesis of a library of quaternary ammonium cation (QAC) small molecule zwitterion building blocks of different hydrophobicity (alkyl chain lengths C4, C8, C12, C16) • …
-
Development of a Biaxial Testing System for Research of Soft Tissue Biomechanics using Laboratory Models
… uniaxial elastomer tests were performed using Sylgard 184, where we manipulated the curing temperature, mix ratio of elastomer and cross linker, and addition of curing reagents (n=10 / group) to adjust its tensile strength. However, the lowest ultimate stress that Sylgard 184 could achieve was …
-
Engineering Icephobic Coatings: Surface Characterization of Pt cured Silicones
… using a commercially available silicone, Sylgard 184®. Sylgard 184 is a two-part, platinum cured silicone elastomer available from Dow Corning with good physical and chemical stability and is used in widely diverse research studies. The thermodynamic work of ice adhesion is related to the …
-
An investigation into stent expansion using numerical and experimental techniques
… mock arteries were manufactured from compliant Sylgard elastomer 184 (Dow Corning). This material was chosen mainly due to its inherent variable elastic properties which are determined by its curing process and ratio of elastomer to curing agent. Extensive testing was carried out on samples of …
-
A COGNITIVE COMPENSATION MECHANSIM FOR DEFORMABLE ANTENNAS
… have been chosen to operate at 3 GHz and use a Sylgard 184 (a flexible silicone-based elastomer) substrate material with a height of 4 mm. Simulations of an HFSS model demonstrate a stable VSWR 2:1 bandwidth of 141 MHz across the entire range of bending. Currently available fabrication methods …
-
The role of altered cyclic strain patterns on proliferation and apoptosis of vascular smooth muscle cells - implications for in-stent restenosis
… BASMC were cultured inside a perfused stented Sylgard mock artery under physiological levels of strain. Vascular SMC proliferation was significantly increased (+40%) and apoptosis decreased within the stented region in comparison to the more compliant upstream and downstream non-stented regions …
-
Microfluidic Devices and Biosensors
… intermediate adhesive layer. Two curing agents (Sylgard 184 and 182) were compared, as well as an alternate UV curable adhesive (NOA 75). The bond strength of Sylgard 184 was found to be stronger than Sylgard 182 under the same curing conditions. Overnight room temperature curing with Sylgard 184 …
-
Overcoming Mesoscale Recording Challenges with Scalable Microfabrication Techniques
… silicone compared to the gold standard of Sylgard 184. We hypothesize that systematically controlling the material properties of silicones will enable high-density patterning that can mitigate the thermal stresses induced during photolithography and other thermal processes. These …
-
MATERIAL SUBSTITUTES FOR THERMAL AND SONIC PROTECTION IN EXPERIMENTAL DIVING WETSUITS
… conductivity testing, a new composite material, Sylgard-527 with embedded K1 glass microspheres, demonstrated the best thermal insulation so far. Furthermore, acoustic testing indicated that the most sonically protective composite was Dowsil 3-4241 with embedded K1 glass microspheres.
-
Microengineered Substrates for Systematic Probing Of Cardiomyocytes’ Morphology, Structure, and Function
… substrates is comparable to those of glass and Sylgard 184. Atomic force microscopy shows that the surface roughness of samples is lower than that of widely-used Sylgard 184. Contact angle measurements before and after exposure to air plasma indicate that these samples are compatible with plasma …
-
MICROSPHERE-BASED COMPOSITE WETSUIT FOR INCOMPRESSIBLE PASSIVE THERMAL INSULATION
… of 3M K1 glass microspheres embedded into a Sylgard 184 silicone elastomer. This provides better thermal insulation than the neoprene material and does not contract at increasing depths in the water. It also provides better mobility along the joints. The proof of concept of this design has …
-
The control of blood flow in skeletal muscle arterioles
… exteriorized and spread onto a transparent Sylgard pedestal. The tissue was maintained at 34 [degrees]C with continuous superfusion of physiologic saline solution. Microiontophoresis of ACh evoked non-decremental CVD in both unbranched and bifurcating arterioles, supporting the role of an …
-
Feasibility Study of Extrusion Based Additive Manufacturing Process for Creating Biomimetic Microchannel Network
… material (sugar) in an extruded matrix of PDMS (Sylgard 184™). The goal of this research work is to understand the alignment of sacrificial material fibers in a viscous two-phase extrudable material. Finding an appropriate material combination is under the future scope of this research. …
-
THE ADHESION OF POLY(DIMETHYL SILOXANE) TO SILICA SUBSTRATES
… The adhesion samples were prepared by casting Sylgard® 184 silicone elastomers on silica surfaces followed by thermal curing. Water contact angle measurements, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared microscopy (FTIR) were …
-
Measurement of adhesion between soft elastomers with different mixing ratios
… between two commonly used soft elastomers PDMS (Sylgard 184) and Ecoflex 0300 are obtained with the measured pull-in and pull-off forces from a dynamical mechanical analyzer. The Young’s moduli of pristine PDMS are also calculated with a two point formula and the results are compared with that …
-
STUDY OF BLAST-INDUCED MILD TRAUMATIC BRAIN INJURY: LABORATORY SIMULATION OF BLAST SHOCK WAVES
… studies was generated using silicone gel (Sylgard-527). The effects of tested models locations and orientations with respect to the shock tube exit were investigated by measuring the generated pressure wave within the brain model and acceleration. The results revealed that the pressure …
-
Processing of photosensitive PDMS for biosensing
… has been used instead of the commonly used SYLGARD 184 from Dow Corning. We see that PDMS can indeed be photo patternable using basic photolithographic processes. Spin coating can be used to obtain a thickness that lies in the range of 0.1 to 0.5 microns.
-
Viscoelastic Behavior of Magnetically Filled PDMS Elastomers: Influence of Filler Loading and Particle Type
… two weight percentages – 40 wt% and 50 wt% – in Sylgard 184 PDMS influence the viscoelastic behavior of MREs intended for compliant biomedical actuation. Eight particle formulations were prepared through sieving, controlled mixing, vacuum degassing, and isotropic curing, producing nineteen total …
Page 1 of 2