Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Synchronous Buck"”.

  1. Conventional And Zvt Synchronous Buck Converter Design, Analysis, And Measurement

    … in support. In this thesis, non-isolated buck type switching converters will be the main focus. This type of power conversion is widely used in many systems for DC to DC voltage step down. Newer methods and topologies to raise converter power efficiency are discussed, including a new …

    ucf Repository record for Conventional And Zvt Synchronous Buck Converter Design, Analysis, And Measurement (opens in a new tab)

  2. Optimization of Power MOSFET for High-Frequency Synchronous Buck Converter

    … technology require the use of a high-frequency synchronous buck converter (SBC) in order to achieve low cost, low profile, fast transient response and high power density. However, high frequency also causes more power loss on MOSFETs. Optimization of the MOSFETs plays an important role in the …

    vt Repository record for Optimization of Power MOSFET for High-Frequency Synchronous Buck Converter (opens in a new tab)

  3. RC Snubber Design using Root-Loci Approach for Synchronous Buck SMPS

    … series RC snubbers for continuous-current synchronous buck switch mode power supply (SMPS). Synchronous buck SMPS is the most popular power converter topology found in modern consumer electronics. It offers relatively good efficiency to target the high-current and low-voltage requirements …

    waterloo Repository record for RC Snubber Design using Root-Loci Approach for Synchronous Buck SMPS (opens in a new tab)

  4. High Performance Low Voltage Power Mosfet For High-frequency Synchronous Buck Converters

    … architecture is first introduced to enable DC-DC buck converters with a current rating up to 40 A and a switching frequency in the MHz range. New high- and low-side NexFETs are specially designed and optimized for the new PSiP architecture to maximize its efficiency and power density. In …

    ucf Repository record for High Performance Low Voltage Power Mosfet For High-frequency Synchronous Buck Converters (opens in a new tab)

  5. Asynchronous Complementary Dual Channel Current Source Gate Driver for Synchronous Buck Converters

    … at higher switching frequencies. Focusing on the Synchronous Buck Converter, efficiency may be degraded due to higher switching loss, higher diode conduction loss, and higher gate drive loss. To increase efficiency, different gate drive configurations have been designed with the goal of minimizing …

    queens Repository record for Asynchronous Complementary Dual Channel Current Source Gate Driver for Synchronous Buck Converters (opens in a new tab)

  6. A predictive analog dead-time control circuit for a high efficiency synchronous buck converter

    The synchronous buck DC-DC power converter is the most common switching converter circuit used to step down a DC input voltage to a low logic level DC output voltage in computer applications. The synchronous buck converter has two power MOSFET switches that turn on in a complementary fashion. …

    ubc Repository record for A predictive analog dead-time control circuit for a high efficiency synchronous buck converter (opens in a new tab) Download PDF for A predictive analog dead-time control circuit for a high efficiency synchronous buck converter (opens in a new tab)

  7. A Two-Mode Synchronous Buck Converter for Low-Power Devices with the Sleep Mode

    … in this application, however, conventional buck converter usually have high efficiency at heavy load but poor efficiency at light load. To increase the light load efficiency of buck converter, this research continues Yeago's two phase buck converter with optimum phase selection control and …

    vt Repository record for A Two-Mode Synchronous Buck Converter for Low-Power Devices with the Sleep Mode (opens in a new tab)

  8. Design, Analysis and Implementation of Multiphase Synchronous Buck DC-DC Converter for Transportable Processor

    … and the small signal analysis of multiphase synchronous buck converter with the droop current loop is derived. A hardware prototype was implemented base on 4-phase synchronous buck topology to provide high efficiency and lower cost solution. The results of load line meets the Intel …

    vt Repository record for Design, Analysis and Implementation of Multiphase Synchronous Buck DC-DC Converter for Transportable Processor (opens in a new tab)

  9. Modeling and Design of a Monolithic High Frequency Synchronous Buck with Fast Transient Response

    … a high frequency, wide input range monolithic buck converter ASIC with fast transient response is designed based on advanced trench BCD technology. Stability is the fundamental requirement in designing switching converter ASIC. Achieving this requires an accurate loop gain design, especially …

    vt Repository record for Modeling and Design of a Monolithic High Frequency Synchronous Buck with Fast Transient Response (opens in a new tab)

  10. Design of integrated voltage-mode controlled DC-DC buck converter

    … the design of integrated voltage-mode controlled synchronous buck converter to achieve high efficiency. Concept of DC-DC converters are discussed first and synchronous rectification techniques are used for the design. This design work can be used for single lithium-ion battery operated portable …

    ttu Repository record for Design of integrated voltage-mode controlled DC-DC buck converter (opens in a new tab)

  11. Modeling And Analysis Of Power Mosfets For High Frequency Dc-dc Converters

    … technology require the use of a high-frequency synchronous buck converter in order to achieve low cost, low profile, fast transient response and high power density. However, high frequency operation leads to increased power MOSFET switching losses. Optimization of the MOSFETs plays an important …

    ucf Repository record for Modeling And Analysis Of Power Mosfets For High Frequency Dc-dc Converters (opens in a new tab)

  12. Analysis And Design Optimization Of Multiphase Converter

    … to the power conversion techniques. Multiphase synchronous buck converters have been widely used in high current low voltage microprocessor application. Design optimization needs to be carefully carried out with pushing the envelope specification and ever increasing concentration towards power …

    ucf Repository record for Analysis And Design Optimization Of Multiphase Converter (opens in a new tab)

  13. Investigation of High-Input-Voltage Non-Isolated Voltage Regulator Modules Topology Candidates

    … investigation of three 12V VRM topologies: the synchronous buck converter, the tapped-inductor buck converter and the active-clamp couple-buck converter. The limitations of today¡¯s synchronous buck approach are identified. The extreme duty cycle of the current topology makes it difficult to …

    vt Repository record for Investigation of High-Input-Voltage Non-Isolated Voltage Regulator Modules Topology Candidates (opens in a new tab)

  14. A Two-mode Buck Converter toward High Efficiency for the Entire Load Range for Low Power Applications

    … (12 mW) to 1200 mA (1440 mW). The conventional buck converter is typically optimized for high efficiency at maximum load at the cost of light-load efficiency. A converter is investigated in this thesis to improve light load efficiency, while being able to handle heavy load, to prolong the …

    vt Repository record for A Two-mode Buck Converter toward High Efficiency for the Entire Load Range for Low Power Applications (opens in a new tab)

  15. High Frequency Gate Driver Design for Gallium Nitride Power Devices

    … for evaluation and verification purpose. A synchronous buck converter is selected to further evaluate the influence of gate drive circuitry from efficiency perspective. A simulation model is implemented in synchronous buck converter to assess the impact of gate driving loop of cascode GaN …

    whiterose Download file for High Frequency Gate Driver Design for Gallium Nitride Power Devices (opens in a new tab)

  16. Voltage-mode controlled synchronous DC-DC buck converter using 0.13[mu] CMOS switches

    … process and automotive temperature corners on a synchronous DC-DC buck converter design. The basics of switching converters will be explored with an emphasis on voltage-mode controlled feedback. A Type-III compensation network is designed using transfer function analysis to compensate for the …

    texas Repository record for Voltage-mode controlled synchronous DC-DC buck converter using 0.13[mu] CMOS switches (opens in a new tab)

  17. MOSFET Current Source Gate Drivers, Switching Loss Modeling and Frequency Dithering Control for MHz Switching Frequency DC-DC Converters

    … contribution is a new high efficiency 1MHz synchronous buck voltage regulator using an improved current source driver. The proposed circuit achieves short rise and fall times to reduce switching loss in the buck HS MOSFET. It also recovers a portion of the SR gate energy, enabling a loss …

    queens Repository record for MOSFET Current Source Gate Drivers, Switching Loss Modeling and Frequency Dithering Control for MHz Switching Frequency DC-DC Converters (opens in a new tab)

  18. MOSFET Current Source Gate Drivers and Topologies for High Efficiency and High Frequency Voltage Regulator Modules

    … contribution is a new continuous CSD for a synchronous buck converter. The proposed CSD is able to drive the control and Synchronous Rectifier (SR) MOSFETs independently with different drive currents enabling optimal design. At 12V input, 1.5 V/30A output and 1MHz, the proposed CSD improves …

    queens Repository record for MOSFET Current Source Gate Drivers and Topologies for High Efficiency and High Frequency Voltage Regulator Modules (opens in a new tab)

  19. GAN-BASED POINT-OF-LOAD CONVERTERS FOR DATA CENTER APPLICATIONS

    … quasi-resonant zero-current-switching (QR-ZCS) buck converter and presents a comparison between the synchronous buck and QR-ZCS buck in a 5-1.8 V POL application.</p>

    ut-knoxville Repository record for GAN-BASED POINT-OF-LOAD CONVERTERS FOR DATA CENTER APPLICATIONS (opens in a new tab)

  20. Simulation, Measurement, and Emulation of Photovoltaic Modules Using High Frequency and High Power Density Power Electronic Circuits

    … can be emulated as the design requires. A non-synchronous buck converter is proposed for the emulation of a single, high-power PV module using traditional silicon devices. With the proof-of-concept working and improvements in efficiency, power density and steady-state errors made, dynamic tests …

    odu Repository record for Simulation, Measurement, and Emulation of Photovoltaic Modules Using High Frequency and High Power Density Power Electronic Circuits (opens in a new tab)

Page 1 of 3