Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 96 for “"Synopsys"”.

  1. Saulės elementų voltamperinių charakteristikų modeliavimas Synopsys TCAD programų paketu /

    … All simulations were carried out using the “Synopsys TCAD” program package and the built – in templates for each evaluated solar cell. Initial simulations were done with a crystalline (c – Si) Al – BSF solar cell, which, while illuminated with a spectrum of an older standard solar simulator, …

    vilnius Repository record for Saulės elementų voltamperinių charakteristikų modeliavimas Synopsys TCAD programų paketu / (opens in a new tab)

  2. Mixed-mode Circuit and Device Simulations of IGBT with Gate Unit Using Synopsys Sentaurus Device

    The use of simulation tools is of great value in the process of developing new power electronics devices and new converter topologies. The development time of power electronics and converter topologies can be shortened by the use of simulation tools. Sentaurus Device combines a good numerical model …

    chalmers Repository record for Mixed-mode Circuit and Device Simulations of IGBT with Gate Unit Using Synopsys Sentaurus Device (opens in a new tab)

  3. On the Characterization of Library Cells

    … presented. The method presented here is based on Synopsys models of cell delay and power dissipation, in particular the linear delay model. This model is chosen as it allows rapid characterization with a modest number of simulations, while still achieving acceptable accuracy. Additionally, a …

    vt Repository record for On the Characterization of Library Cells (opens in a new tab)

  4. Using Physical Compilation to Implement a System on Chip Platform

    … design using physical synthesis is Synopsys Physical Compiler. The flow has been setup through the use of the Galaxy Reference Flow scripts obtained from Synopsys.</p> <p>As part of the thesis, an analysis of the differences between a physically synthesized design and a logically …

    ut-knoxville Repository record for Using Physical Compilation to Implement a System on Chip Platform (opens in a new tab)

  5. Exploration of 3D Nanoscale Image Sensor to Enable Logic and Sensing in Single Chip

    … Nanowire Image sensor has been performed in TCAD Synopsys Sentaurus tools. Using the Raytracing optical physics model, the optical response of the Nanowire Image sensor is simulated and photo-current response is observed. The measured optical generation and efficiency have been compared with PN …

    umkc Repository record for Exploration of 3D Nanoscale Image Sensor to Enable Logic and Sensing in Single Chip (opens in a new tab)

  6. Robust, Low Power, Discrete Gate Sizing

    … routed, and optimized for performance using the Synopsys University 32/28nm standard cell library and technology files. Operating at the optimized clock frequency, results show an average power reduction of about 20% versus DWCFLP and 9% against variation-aware gate sizing with FLP. Timing and …

    usf Repository record for Robust, Low Power, Discrete Gate Sizing (opens in a new tab)

  7. Structural testbench development for DSP models

    … a conventional schematic capture tool, e.g., Synopsys Graphical Environment, can be used to construct the test bench. An intelligent interface prompts the user for high level test bench information, and inserts this information into the test bench code. The intelligent interface also allows …

    vt Repository record for Structural testbench development for DSP models (opens in a new tab)

  8. Fyzická implementace digitálního bloku na čip

    … flow pre inú technológiu. Flow využíva nástroje Synopsys, najmä Fusion Compiler, využívajúci jeho možnosti fyzickej syntézy. Na zistenie technologických limitov, bola vykonaná analýza vybraných nastavení použitého flow. Práca sa zaoberá aj fyzickou verifikáciou, konkrétne DRC, LVS a STA.

    brno-tech Repository record for Fyzická implementace digitálního bloku na čip (opens in a new tab)

  9. Automatic back annotation of timing into VHDL behavioral models

    … Assistant, the CLSI -VTIP CAD tool and the Synopsys Design Compiler to calculate the timing delays and to back annotate the delays into the behavioral model. The CLSI -VTIP tool is used to extract the details from the VHDL model and store it in the form of data structures. These details are …

    vt Repository record for Automatic back annotation of timing into VHDL behavioral models (opens in a new tab)

  10. Performance estimation of large area nanowires

    … infrastructure will be developed in parallel. Synopsys Taurus and Medici will be used for 3D device modelling, Verilog A for circuit-compatible models, and Spice for circuit and system evaluation.

    gatech Repository record for Performance estimation of large area nanowires (opens in a new tab)

  11. High-speed Viterbi decoder design and implementation with FPGA

    … the design. We use VHDL to describe the design, Synopsys tools to synthesize it and Xilinx tools to target the design to an XVC300-8 device. Besides the above, the principle of the Viterbi Algorithm, two kinds of structures of the Viterbi decoder, VHDL coding style, a high level synthesis …

    manitoba Repository record for High-speed Viterbi decoder design and implementation with FPGA (opens in a new tab)

  12. Model Development, Synthesis and Validation Using the Modeler's Assistant

    … provided to the user. The tool interfaces to 'Synopsys' VHDL analyzer, graphics debugger and synthesis tools. Validation of the behavioral model versus the synthesized structural model is also discussed. A detailed programming manual with many examples is provided for the benefit of the user.

    vt Repository record for Model Development, Synthesis and Validation Using the Modeler's Assistant (opens in a new tab)

  13. Development of VHDL behavioral models with back annotated timing

    … a gate-level design of the model using the Synopsys Design Compiler. It extracts the values for the delays required from the gate-level design. It then back-annotates these values into the VHDL behavioral model. BACKANN is thus a design automation tool that helps the development of VHDL …

    vt Repository record for Development of VHDL behavioral models with back annotated timing (opens in a new tab)

  14. A comparative study of adders

    … adders were synthesized using Design Vision (by Synopsys). Auto Place and Route was performed using Cadence Encounter to get the layout of the adders and then Parasitic Extraction was performed to get the actual routing delay. Primetime was used to calculate the post synthesis and post place and …

    texas Repository record for A comparative study of adders (opens in a new tab)

  15. Novel VLSI architecture of motion estimation and compensation for H.264 standard

    … Transfer Level VHDL codes then synthesized with Synopsys Design Compiler, using TSMC 0.25um technology. The synthesized Application Specific Integrated Circuits (ASIC's) has an area of 664um x 664um.

    rit Repository record for Novel VLSI architecture of motion estimation and compensation for H.264 standard (opens in a new tab)

  16. Exploration Of Energy And Area Efficient Techniques For Coarse-grained Reconfigurable Fabrics

    … fabric architectures on 90nm ASIC process from Synopsys. Results show area improvement with energy savings as compared to baseline architecture.

    unt Repository record for Exploration Of Energy And Area Efficient Techniques For Coarse-grained Reconfigurable Fabrics (opens in a new tab)

  17. Realistic simulation of forward and reverse characteristics of 4H-SiC pn junction diode

    … diode data formed the basis of calibration of SYNOPSYS MEDICI for 4H-SiC pn junction simulation. Relevant parameters in the trap and photogeneration models are modified for realistic simulations. Motivation and justification of the modifications are presented. A universally applicable model …

    nus Repository record for Realistic simulation of forward and reverse characteristics of 4H-SiC pn junction diode (opens in a new tab) Download file for Realistic simulation of forward and reverse characteristics of 4H-SiC pn junction diode (opens in a new tab)

  18. Modelling a distributed power system in Saber® - Focused on power conversion, cable characteristics and usability of Saber® for Saab microwave systems

    … To do an evaluation of the software Saber® from Synopsys Inc, and to design a model of an airborne distributed power system. By building a simple system from hardware measurements and model it a good start of the project was made, and thereby learning the basics of Saber®. The design was later …

    chalmers Repository record for Modelling a distributed power system in Saber® - Focused on power conversion, cable characteristics and usability of Saber® for Saab microwave systems (opens in a new tab)

  19. Design of a real time digital image correlator

    … has been modeled in VHDL and simulated using the SYNOPSYS VHDL Simulator. This thesis also presents a proposed implementation of the circuit.

    vt Repository record for Design of a real time digital image correlator (opens in a new tab)

  20. Design and Study of Through Silicon Thermal Via (TSTV) for WBG Devices Using Custom Integration of TCAD and 3D Modelling CAD Tools

    … ease and error free. TCAD software packages like Synopsys Sentaurus offers 2D and 3D device design and simulation capability, however, it misses on ease of 3D design, parametric geometry, ease of resolving numerical errors in the 3d geometry and error-free meshing of the overall geometry. In order …

    buffalo Repository record for Design and Study of Through Silicon Thermal Via (TSTV) for WBG Devices Using Custom Integration of TCAD and 3D Modelling CAD Tools (opens in a new tab)

Page 1 of 5