Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Synthetic Eddy Method"”.
-
Atmospheric Boundary Layer Effects on Ship Airwakes Using Synthetic Eddy Method in Lattice-Boltzmann Simulations
… should be conducted. There are different CFD methodologies to obtain an accurate ship airwake simulation, one of them is the Lattice-Boltzmann Method (LBM). It has been proven that the LBM is a computationally efficient mid-fidelity method to solve various flow cases. Previous studies showed …
-
Implementation and Verification of a Synthetic Eddy Method (SEM) in the Eagle3d Compressible Flow Solver
… of this thesis is to implement and evaluate a Synthetic Eddy Method (SEM) into the Eagle3D compressible flow solver. Both the ability of Eagle3D to resolve unsteady turbulent ow field and capability of the SEM to reproduce given Reynolds stress profiles to start realistic turbulent behavior are …
-
Large Eddy Simulations of high Reynolds number Complex Flows with Synthetic Inlet Turbulence
… was motivated by the desire to use Large Eddy Simulations (LES) to calculate liner heat transfer in industrial scale gas turbine combustors, which operate at high Reynolds numbers and high Swirl numbers. LES has several challenges which need to be surmounted for general application to …
-
Synthetic Inlet Boundary Conditions for LES
… thesis describes the analysis of four different methods for generating synthetic turbulence, and the implementation of the methods into HYDRA CFD Code. These methods are the synthetic eddy method (SEM) by Jarrin, divergence free synthetic eddy method (DFSEM) by Poletto, synthetic fluctuations by …
-
Development of Eagle3D Solver For Wall Modeled LES of Transonic Flows
<p>Wall modeled Large Eddy Simulation (LES) is an area of interest due to its ability to lower computational costs of LES simulation. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and …
-
A Numerical and Experimental Evaluation of the Turbulent Heat Flux in a Heated Jet in Crossflow
… used to examine the flow numerically. A Detached Eddy Simulation (DES) methodology is examined but found to be ineffective at correctly capturing the physics of the flow. A Large Eddy Simulation (LES) numerical model is developed and applied in which tube and duct turbulence inflow effects are …
-
Wall Modeled Large-Eddy Simulations in Rotating Systems for Applications to Turbine Blade Internal Cooling
Large-Eddy Simulations (LES or wall-resolved LES, WRLES) has been used extensively in capturing the physics of anisotropic turbulent flows. However, near wall turbulent scales in the inner layer in wall bounded flows makes it unfeasible for large Reynolds numbers due to grid requirements. This …
-
Modelling of airwake hazards for helicopter flight simulation
… and implementation of a new turbulence modelling method for flight simulation. The model is based on an adaptation of a synthetic eddy method (SEM). It generates a random turbulence field surrounding the aircraft by filling a control volume with turbulence generating eddies which are displaced by …
-
Large Eddy Simulations of Vertical Jets in Crossflow
… an in house code “Chem3D” is used with Large Eddy Simulation (LES) to model turbulence. Initially, a circular jet is simulated and validated. A rectangular jet with the same mass flow rate is simulated for comparison. Dynamic mode decomposition (DMD) is used for modal study of these jets. An …
-
Improving Building CFD Peak Pressure Computation Using LES with a Focus on Inflow Turbulence Methods and Grid Spacing Size.
… wind loads more accurately three different methods (i.e., field measurement, wind tunnel (WT), and computational fluid dynamics (CFD)) are in use. A well-validated CFD provides more flow field details at lower costs compared to field measurements and WT. As strong winds are extremely …
-
Model Studies of Slag Metal Entrainment in Gas Stirred Ladles
… The individual models are (1) multiphase large eddy simulations to simulate slag entrainment in a narrow domain that receives its boundary conditions from (2) single phase RANS simulation of a full ladle, (3) a Lagrangian particle tracking method to compute the residence times of slag droplets …
-
Development of an interface using penalisation method for improving computational performance of bushfire simulation tools
… and experimental data, and advances in numerical methods for computing winds, have led to the development of new tools capable of simulating wind flow. Several numerical models have been developed for fire prediction and forecasting. Modelling wind in physics-based models like Fire Dynamics …