Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"System-level Control"”.

  1. Design of System Level Control for a Residential Power Router

    … the overall power flow and load management system for a 2 kW residential power router. The objective is to satisfy the residential load demand with cost savings by managing the energy sources including PV, battery, generator, and grid. The power flow management system algorithm is developed …

    arkansas Repository record for Design of System Level Control for a Residential Power Router (opens in a new tab)

  2. Modelling, System-Level Control, Fault Protection, and Power Flow Analysis in Medium-Voltage DC Systems

    Medium-voltage DC (MVDC) systems, typically operating between ±0.75 kV and ±50 kV, are emerging as a promising solution for modern power networks. Their potential applications span sub-transmission, distribution, and collection networks, providing enhanced support for the integration of regional …

    unsw Repository record for Modelling, System-Level Control, Fault Protection, and Power Flow Analysis in Medium-Voltage DC Systems (opens in a new tab)

  3. Distributed Optimization Method for Intelligent Control of DC Microgrids

    … energy resources, loads and energy storage systems in a DC microgrid are equipped with power electronic converters. With the integration of advanced power electronics devices, a microgrid is able to utilize a broader range of technologies in its design and operation. A key feature of power …

    south-carolina Repository record for Distributed Optimization Method for Intelligent Control of DC Microgrids (opens in a new tab)

  4. Component-based Intelligent Control Architecture for Reconfigurable Manufacturing Systems

    … paradigm, i.e. Reconfigurable Manufacturing Systems (RMS), has emerged to address such challenging issues. RMSs are able to adapt themselves to new business conditions timely and economically with a modular design of hardware/software system. Although a lot of research has been conducted in …

    vt Repository record for Component-based Intelligent Control Architecture for Reconfigurable Manufacturing Systems (opens in a new tab)

  5. Energy Harvesting from Elliptical Machines Using Four-Switch Buck-Boost Topology

    … providing a modular synchronous power generation system. Due to the dynamic and sporadic output voltage and power characteristics of the Precor elliptical machine, the system requires a DC-DC converter as a voltage preregulator. The inherent wide input range, high efficiency, and low parts cost of …

    calpoly Repository record for Energy Harvesting from Elliptical Machines Using Four-Switch Buck-Boost Topology (opens in a new tab)

  6. Multiscale, multidimensional renewable energy generation and storage management system

    Hydrogen combined cooling heating and power system provides an efficient and holistic means of meeting multiscale and multidimensional energy demands through short, medium and long term storage. The energy generation consist of solar thermal heat, photovoltaic electricity and wind power. The energy …

    whiterose Download PDF for Multiscale, multidimensional renewable energy generation and storage management system (opens in a new tab)

  7. A Distributed Digital Control Architecture for Power Electronics Systems

    … proposes a novel approach to power electronics system design that is based on the open-architecture distributed digital controller and modular power electronics building blocks (PEBBs). The proposed distributed digital controller partitions the controller in three levels of control authority. …

    vt Repository record for A Distributed Digital Control Architecture for Power Electronics Systems (opens in a new tab)

  8. A hierarchical control strategy for hybrid vehicles.

    … complexity in the drive train appropriate control is critical to achieve maximum fuel economy. Research conducted by the Test Bed 3 group in the Center for Compact and Efficient Fluid Power at the University of Minnesota is investigating the potentials of fluid power power trains to …

    umn Repository record for A hierarchical control strategy for hybrid vehicles. (opens in a new tab)

  9. Deep learning techniques for system optimization in cloud architectures

    … computing refers to the on-demand provision of system resources, especially computing power and storage. These resources typically exist on individual servers found in datacenter environments and/or server farms around the world. Proper and efficient management of those resources becomes …

    greece Repository record for Deep learning techniques for system optimization in cloud architectures (opens in a new tab)

  10. Free-Running Ring Oscillators for Crystal-Free Communication Systems: Design, Simulation Challenges, and Frequency Stability Improvements

    … (ROs) for crystal-free wireless communication systems. The first major contribution is a tutorial-style study of frequency stability metrics, providing clear definitions, conversions methods, and comparative analysis of commonly used figures of merit such as phase noise, Allan deviation, and …

    portland-state Repository record for Free-Running Ring Oscillators for Crystal-Free Communication Systems: Design, Simulation Challenges, and Frequency Stability Improvements (opens in a new tab)

  11. Decentralized Power Management and Transient Control in Hybrid Fuel Cell Ultra-Capacitor System

    … enhance applicability and adaptability of such systems. To this end, we revisit prior investigation on the invariant properties of SOFC systems, that led to prediction of fuel utilization U and STCR in the absence of intrusive and expensive sensing. This work provides further insight into the …

    ucf Repository record for Decentralized Power Management and Transient Control in Hybrid Fuel Cell Ultra-Capacitor System (opens in a new tab)

  12. Control of DC Power Distribution Systems and Low-Voltage Grid-Interface Converter Design

    … aspects of facilitating the application of dc systems: (a) system-level control to improve load sharing, voltage regulation and efficiency; (b) design of a high-efficiency interface converter to connect dc microgrids with the existing low-voltage ac distributions, with a special focus on …

    vt Repository record for Control of DC Power Distribution Systems and Low-Voltage Grid-Interface Converter Design (opens in a new tab)

  13. Hierarchical Control and Optimization of Energy Systems with Application to Renewable Energy and Thermal Management Systems

    This work focuses on the design, modeling, control, and optimization of energy systems with explicit consideration of thermal dynamics, operational constraints, and system resilience. As modern energy infrastructures transition toward greater integration of renewable energy resources, the …

    ttu Repository record for Hierarchical Control and Optimization of Energy Systems with Application to Renewable Energy and Thermal Management Systems (opens in a new tab)

  14. Modeling And Design Of Multi-port Dc/dc Converters

    … is proposed to reduce the total satellite power system mass. Moreover, a fourport DC/DC converter is proposed for renewable energy applications where several renewable sources are employed. Compared to the traditional two-port converter, three-port or four-port converters are classified as …

    ucf Repository record for Modeling And Design Of Multi-port Dc/dc Converters (opens in a new tab)

  15. Advanced inverter control for uninterruptible power supplies and grid-connected renewable energy applications

    … logic devices in modern power electronics systems offer great control flexibility and capability, providing attractive features particularly for applications in which complex control tasks are involved. This dissertation investigates some DSP based advanced control algorithms for …

    msu Repository record for Advanced inverter control for uninterruptible power supplies and grid-connected renewable energy applications (opens in a new tab)

  16. Development of a multi-port DC-DC converter for a magnetically-coupled residential micro-grid

    … algorithms for power converter and micro-grid controls. A topology of multi-port converter using a high frequency magnetic link is proposed for residential micro-grid applications. Using the magnetic link in the proposed multi-port converter can reduce the complexity and size of the entire …

    uts Repository record for Development of a multi-port DC-DC converter for a magnetically-coupled residential micro-grid (opens in a new tab)

  17. Advanced control in smart microgrids

    This thesis presents various advanced control strategies in smart microgrid applications. In recent years, due to the rapid depletion of fossil fuels, increasing demand of electricity, and more strict compulsory government policies on reduction of greenhouse gas emissions, renewable energy …

    uts Repository record for Advanced control in smart microgrids (opens in a new tab)

  18. High power density on-board chargers (OBCs) for electric vehicles (EVs)

    … (FRT) capability, and battery monitoring and control by modularising the high voltage (HV) battery and power converters. The modular charger utilises single-stage and two-stage Cuk-based and SEPIC-based converter topologies as submodules (SMs), chosen for their high efficiency and continuous …

    lancaster Download PDF for High power density on-board chargers (OBCs) for electric vehicles (EVs) (opens in a new tab)