Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 254 for “"TCAD"”.
-
Terahercinio jutiklio modeliavimas TCAD programa /
… and Simulation of Terahertz Detector with TCAD Software.
-
TCAD Simulations of Uni-Traveling-Carrier Photodiodes
… (UTC-PD) using a commercial software (ISE-TCAD) along with some comparisons with published results. Physical properties of the UTC-PD have been investigated at different optical injection levels. Modulation of the energy band profile due to the space charge effect has been observed at high …
-
Saulės elementų voltamperinių charakteristikų modeliavimas Synopsys TCAD programų paketu /
… simulations were carried out using the “Synopsys TCAD” program package and the built – in templates for each evaluated solar cell. Initial simulations were done with a crystalline (c – Si) Al – BSF solar cell, which, while illuminated with a spectrum of an older standard solar simulator, exhibited …
-
ESD circuit synthesis and analysis using TCAD and SPICE
… Technology Computer Aided Design tools, or TCAD tools) were used to gain insight into the dynamics of the complex SCR behavior prior to and during the latchup triggering. Test structures of the SCR, as well as its sub-components, were fabricated for characterization and modeling data …
-
Behavioral Modeling of CMOS SPADs Based on TCAD Simulations
… Athena from the Silvaco tools suite to feed a TCAD simulator with an accurate model structure that can include fabrication defects. Extract its key parameters with TCAD simulation of the device, performed with ATLAS, from the Silvaco TCAD tools suite. Combine physical parameters and analytical …
-
TCAD Modelling and PDK Development For 3nm GAAFET Technology
… full physical design flow. In addition, a novel TCAD model for GAAFET transistor is developed using Sentaurus Process including Buried Power Rail (BPR) technology to facilitate the in-depth study and simulation of 3nm GAAFETs. With the current model designed adhering to foundry requirements, …
-
TCAD modeling of mixed-mode degradation in SiGe HBTs
… of this work is to develop an effective TCAD based hot-carrier degradation model in predicting the damage that a SiGe HBT undergoes as it is stressed across bias, time and temperature.
-
Modeling radiovoltaic devices: A coupled Geant4-TCAD simulation workflow
… radiation transport code, to Synopsys Sentaurus TCAD device simulation, converting Geant4’s depth-resolved energy deposition profile into a carrier generation rate imported through TCAD’s Optical Generation module. The workflow is applied to three candidate device stacks an amorphous silicon …
-
Uncalibrated TCAD methodology for analysis of ESD protection devices
In this work, an uncalibrated TCAD methodology for simulation of electrostatic discharge (ESD) devices is presented. The methodology addresses TCAD setup issues including device construction, boundary conditions, and choosing a physical model and parameters. A major trade-off between computation …
-
TCAD simulation framework for the study of TSV-device interaction
… The purpose of this thesis is to develop a TCAD framework for process and device co-simulation of a TSV transistor system to study the various mechanisms of interaction between them, as well as between the TSV and substrate. The utility of this tool has been demonstrated by studying two …
-
TCAD MODELLING AND CHARACTERIZATION OF DEFECTS IN ADVANCED NANOSCALE SEMICONDUCTOR DEVICES
… in actual devices, it is necessary to use a TCAD defect model to build up the defect library with different defect types. This work hence involves the introduction of defects into the TCAD transistor model and simulation of their electrical behavior. The electrical behavior is characterized …
-
Advanced modeling techniques for ferroelectric memories: from TCAD to machine learning
The continued miniaturization of complementary metal-oxide-semiconductors (CMOS) has been a core for enhancing their performance, expanding functionality, and reducing cost per cell by following Moore’s law. Similarly, memory devices have pursued relentless scaling the device dimension. A prime …
-
TCAD analysis of heating and maximum current density in carbon nanofiber interconnects
As devices shrink, the current density through interconnects increases proportionally making new materials a necessity for industry growth. Carbon nanofiber (CNF) and carbon nanotube's (CNT) potential for high current density make them a possible replacement for metal contacts. Learning the …
-
A Physics-Based Analytical Compact Model, TCAD Simulation, and Empirical SPICE Models of GaN Devices for Power Applications
… modeled.The GIT device is investigated via a TCAD Sentaurus simulation to understand the effects of various parameters unique to the GIT. Based on the TCAD simulation and model, an analytical compact model can be developed for a quick and more intuitive understanding of the GIT behavior. …
-
Design and Study of Through Silicon Thermal Via (TSTV) for WBG Devices Using Custom Integration of TCAD and 3D Modelling CAD Tools
… itself, 3D technology computer aided design (TCAD) and multi-physics simulation software tools are a must. Conventionally, TCAD and simulation software tools like SILVACO TCAD, require the device engineers to simplify the actual 3D device design into its 2D slice, consisting of only sharp …
-
Physics-Based Technology Computer-Aided Design and Compact Modeling with Special Emphasis on Advanced Indium-Phosphide Heterojunction Bipolar Transistors
This work investigates the compact- and TCAD modeling of III-V semiconductor based HBTs for high-power and high-speed applications. It demonstrates an approach for modeling such devices that connects compact- and TCAD modeling of such technologies. Compact model extensions are derived based on TCAD …
-
Failure Mode Analysis and Design Optimization of 15 kV SiC SGTO Thyristors for Pulsed Power Applications
… this dissertation presents the electro-thermal TCAD simulations of the 15 kV SiC SGTO switching 2 kA from a PFN. These simulations were performed in an effort to gain a deeper understanding of the device’s operation and failure modes. Based off the TCAD simulations, a theory of stacking fault …
Page 1 of 13