Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 14 of 14 for “"TCAD Modeling"”.

  1. TCAD modeling of mixed-mode degradation in SiGe HBTs

    … of this work is to develop an effective TCAD based hot-carrier degradation model in predicting the damage that a SiGe HBT undergoes as it is stressed across bias, time and temperature.

    gatech Repository record for TCAD modeling of mixed-mode degradation in SiGe HBTs (opens in a new tab)

  2. Physics-Based Technology Computer-Aided Design and Compact Modeling with Special Emphasis on Advanced Indium-Phosphide Heterojunction Bipolar Transistors

    This work investigates the compact- and TCAD modeling of III-V semiconductor based HBTs for high-power and high-speed applications. It demonstrates an approach for modeling such devices that connects compact- and TCAD modeling of such technologies. Compact model extensions are derived based on TCAD …

    qucosa-diss

  3. On the effects of total ionizing dose to the single-event transient response of a silicon-germanium BiCMOS platform

    … full width half max of the transient response. TCAD modeling and simulations are used to confirm measured results.

    gatech Repository record for On the effects of total ionizing dose to the single-event transient response of a silicon-germanium BiCMOS platform (opens in a new tab)

  4. STUDY OF SINGLE-EVENT TRANSIENTS IN SILICON-GERMANIUM HETEROJUNCTION BIPOLAR TRANSISTORS

    … and compared to those of heavy-ions. 3-D TCAD modeling is utilized to understand the source of the differences in the transients. Single-event upset (SEU) screening of shift-registers shows that X-ray can detect device sensitive nodes smaller than the beam. Second, a fully calibrated 3-D …

    gatech Repository record for STUDY OF SINGLE-EVENT TRANSIENTS IN SILICON-GERMANIUM HETEROJUNCTION BIPOLAR TRANSISTORS (opens in a new tab)

  5. Silicon Photonic Microring Modulator-Based All-Optical Bistable Switch and Memory Cells

    … the system-level performance of these devices, TCAD modeling of reliability factors, including environmental temperature and OSET transients, is essential. Additionally, lab measurement data, informed by robust nonlinear material models, will be valuable for OSET radiation testing, providing a …

    gatech Repository record for Silicon Photonic Microring Modulator-Based All-Optical Bistable Switch and Memory Cells (opens in a new tab)

  6. Modeling and characterization of photoresponse of nanowires with asymmetric contacts and bending strain

    … response in bulk silicon, which is explained by TCAD modeling. Modeling also shows that both short circuit current and open circuit voltage in nanowire solar cells and photo sensors can be enhanced by using contact metals with large work function difference. This does not need any p-n junction …

    washington Repository record for Modeling and characterization of photoresponse of nanowires with asymmetric contacts and bending strain (opens in a new tab)

  7. Physics-based multiscale modeling of III-nitride light emitters

    … of semiconductor device physics, Technology CAD (TCAD) has been regarded as an indispensable tool for the interpretation and prediction of device behavior. More specifically, TCAD modeling and simulation of nanostructured III-nitride light emitters still have challenging problems and is currently …

    poli-torino Repository record for Physics-based multiscale modeling of III-nitride light emitters (opens in a new tab)

  8. Vertical III-V Nanowire Tunnel Field-Effect Transistor

    … heterojunction was characterized. Furthermore, TCAD modeling was performed to understand what limits the performance of these devices. Also, electrical measurement of the random telegraph noise allowed us to understand the impact the oxide defects have on highly scaled devices.

    lund Repository record for Vertical III-V Nanowire Tunnel Field-Effect Transistor (opens in a new tab) Download PDF for Vertical III-V Nanowire Tunnel Field-Effect Transistor (opens in a new tab)

  9. Design, scaling and reliability of devices for high-performance mixed-signal applications

    … using this knowledge to enhance the predictive modeling of performance and reliability for these devices. The primary objective of this effort is to develop a predictive device modeling methodology and simulation framework that can be used to design new mixed-signal device technologies, and can …

    gatech Repository record for Design, scaling and reliability of devices for high-performance mixed-signal applications (opens in a new tab)

  10. Two-dimensional semiconductors for future electronics

    … analysis, electrical characterization and TCAD modeling. First, the air sensitivity of few TMDs is considered. An initial AFM study show high reactivity in HfSe2, with blisters growing up to 60 nm after one day from ambient exposure. These results are later confirmed by other techniques, …

    cork Repository record for Two-dimensional semiconductors for future electronics (opens in a new tab)

  11. Physics-based simulation of narrow and wide band gap photonic devices

    … is given by Technology Computer-Aided Design (TCAD), modeling and simulation. In the first part of this thesis, I present the main part of my research activity, focused on the development of abilities and methodologies for the simulation of realistic three-dimensional HgCdTe-based infrared …

    poli-torino Repository record for Physics-based simulation of narrow and wide band gap photonic devices (opens in a new tab)

  12. Passive Wireless Radiation Dosimeters for Radiation Therapy Using Fully-Depleted Silicon-on-Insulator Devices

    … from both technology computer aided design (TCAD) simulation and an analytical model to evaluate the radiation effect quantitatively. Based upon the experimental results, the design of passive wireless sensors using FDSOI varactors was proposed. In Chapter 4, the fabrication process of FDSOI …

    umn Repository record for Passive Wireless Radiation Dosimeters for Radiation Therapy Using Fully-Depleted Silicon-on-Insulator Devices (opens in a new tab)

  13. On-resistance versus Breakdown Voltage Capabilities of Emerging Semiconductors for Opto- and Power-Electronics

    … Impact ionization coefficients are essential for modeling power- and opto-electronic devices; they need to be quantified more accurately, as processed data suggest that they are doping-dependent. 4H-SiC p-i-n diodes are used to measure the photo-multiplication and for the experimental extraction …

    maryland Repository record for On-resistance versus Breakdown Voltage Capabilities of Emerging Semiconductors for Opto- and Power-Electronics (opens in a new tab)

  14. TCAD Modelling and PDK Development For 3nm GAAFET Technology

    … full physical design flow. In addition, a novel TCAD model for GAAFET transistor is developed using Sentaurus Process including Buried Power Rail (BPR) technology to facilitate the in-depth study and simulation of 3nm GAAFETs. With the current model designed adhering to foundry requirements, …

    gatech Repository record for TCAD Modelling and PDK Development For 3nm GAAFET Technology (opens in a new tab)