Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 40 for “"THERMAL TESTS"”.

  1. Process Engineering and Performance of Sustainable Polyamide 6 (PA6) Based Blends and Biocomposites

    … materials were completed through mechanical and thermal tests while the viscoelastic behaviour was investigated via dynamic mechanical analysis. Fourier transform infrared spectroscopy and nuclear magnetic resonance was also performed to understand the effect of blending PBT with PA6. Following …

    guelph Repository record for Process Engineering and Performance of Sustainable Polyamide 6 (PA6) Based Blends and Biocomposites (opens in a new tab)

  2. A study of oxidation reaction kinetics during an air injection process.

    … for Australian light-oil reservoirs. A series of thermal tests was performed to investigate the oxidation behaviour of two selected reservoirs in both air and oxygen environments. The first step undertaken in this study is thermogravimetric and calorimetric characterization of crude oils to (i) …

    adelaide Repository record for A study of oxidation reaction kinetics during an air injection process. (opens in a new tab)

  3. Study of screw connections for releasing thermal force in aluminium roof-purlin system

    … doubles that of steel, which causes large thermal expansion and corresponding thermal stresses. The research focused on the thermal behaviour of large-span aluminium roof-purlin systems, with the aim of optimizing the slotted connections. To achieve this, the research conducted material …

    adelaide Repository record for Study of screw connections for releasing thermal force in aluminium roof-purlin system (opens in a new tab)

  4. Application of Microwaves and Thermophilic Anaerobic Digestion to Wastewater Sludge Treatment

    … on the characteristics of the sludge, due to thermal and athermal effects. It also evaluates the effects some process variables in the activated sludge process have on the pretreatment efficiency as well as the effect operating conditions in the downstream anaerobic digestion process have on …

    ottawa-retro Repository record for Application of Microwaves and Thermophilic Anaerobic Digestion to Wastewater Sludge Treatment (opens in a new tab)

  5. Estudo das propriedades mecânicas de biocompósitos de polipropileno reforçados com fibras naturais

    … flexion on three points, impact, in addition to thermal tests (HDT). These biocomposites had been also subjected the essay physicist-chemistry index of fluidity (IF). It was observed that the biocomposites of PP with 20% curauá, obtained bigger increase in the modulus of elasticity and a bigger …

    brazil-ufrn Repository record for Estudo das propriedades mecânicas de biocompósitos de polipropileno reforçados com fibras naturais (opens in a new tab)

  6. TESTBED DESIGN AND DEVELOPMENT FOR MEDIUM VOLTAGE MW SCALE DC CIRCUIT BREAKER

    … the solid-state circuit breaker. Switching and thermal tests were run to understand the effects on components at different voltages and currents and to determine if the solid-state circuit breaker can provide lasting protection for future technologies. This study shows that the testbed …

    nps Repository record for TESTBED DESIGN AND DEVELOPMENT FOR MEDIUM VOLTAGE MW SCALE DC CIRCUIT BREAKER (opens in a new tab)

  7. MICROSTRUCTURAL SURFACE INCORPORATION OF PHASE CHANGE MATERIALS FOR THERMAL MANAGEMENT APPLICATIONS

    Thermal management strategies employed to mitigate the detrimental effects of elevated temperatures include the use of heat sinks or spreaders, thermal interface materials, and phase change materials (PCM), among others. PCM are substances capable of absorbing or releasing thermal energy when they …

    nps Repository record for MICROSTRUCTURAL SURFACE INCORPORATION OF PHASE CHANGE MATERIALS FOR THERMAL MANAGEMENT APPLICATIONS (opens in a new tab)

  8. An Integrated PCB-Based Heating and Auto-Ranging Platform for Volatile Organic Compound (VOC) Detection Using Carbon Nanotube Based Sensors

    … beneath the sensor array, allowing programmable thermal modulation via PWM control. This heater accelerates sensor recovery and enables temperature-programmed analyte discrimination. The platform also integrates environmental monitoring via an HTU21D sensor for real-time temperature and humidity …

    usf Repository record for An Integrated PCB-Based Heating and Auto-Ranging Platform for Volatile Organic Compound (VOC) Detection Using Carbon Nanotube Based Sensors (opens in a new tab)

  9. MEDIUM VOLTAGE DC SOLID STATE CIRCUIT BREAKER BENCH TEST

    … This thesis focuses on the switching and thermal tests necessary to validate the implemented concepts, and the data will be used for down-selecting technical directions, improving the SSCB performance. The results show that the SSCB is sufficient to interrupt most faults while containing …

    nps Repository record for MEDIUM VOLTAGE DC SOLID STATE CIRCUIT BREAKER BENCH TEST (opens in a new tab)

  10. Análise da eficiência de aquecedor solar espiral com e sem efeito estufa para piscinas

    … effectiveness. Will be presented results of thermal tests for this the two cases, with and without transparent cover. Will be demonstrated, by comparison, the thermal, economic and material feasibility of these systems for heating swimming pools.

    brazil-ufrn Repository record for Análise da eficiência de aquecedor solar espiral com e sem efeito estufa para piscinas (opens in a new tab)

  11. Stator Design for 1 Megawatt High-Speed Radial-Flux Surface Mounted PM Motor for Aerospace Applications

    … to mechanical robustness, power density, and thermal management. The stator design and analysis for a 1-megawatt (MW), high-speed (20,000 RPM), radial-flux surface-mounted permanent magnet (PM) motor optimized for aerospace applications is presented in this thesis. The stator meets crucial …

    mcmaster Repository record for Stator Design for 1 Megawatt High-Speed Radial-Flux Surface Mounted PM Motor for Aerospace Applications (opens in a new tab)

  12. DESIGN OF A NOVEL THERMO-ELECTRIC COOLING DEVICE CAPABLE OF ACHIEVING CRYOGENIC TEMPERATURES FOR DENTAL PULP TESTING

    … test whether the dental pulp is dead or alive. Thermal tests (cold and hot) and electrical pulp testing techniques are two of the most common pulp sensibility tests currently being used. Although cold tests have shown more promising results in comparison to other techniques, the current methods …

    sask Repository record for DESIGN OF A NOVEL THERMO-ELECTRIC COOLING DEVICE CAPABLE OF ACHIEVING CRYOGENIC TEMPERATURES FOR DENTAL PULP TESTING (opens in a new tab)

  13. Analysis of the potential for thermal radiation promotion within solid oxide fuel cells

    … Established methods for providing SOFC stack thermal management are either very costly, work against system design goals, or are unreliable. If SOFC thermal management needs could be reduced, it is possible that SOFC cost and lifetime could be improved. It is thought that promotion of thermal …

    gatech Repository record for Analysis of the potential for thermal radiation promotion within solid oxide fuel cells (opens in a new tab)

  14. A feasibility study on using surface treated kaolin mineral in thermoplastic composites

    … standard, for the second phase. Mechanical tests, thermal tests, and density measurements are used to evaluate the composite material properties. SEM imaging is used to investigate filler morphology and its distribution within the matrix, as well as voids and defects. A comparison between …

    gatech Repository record for A feasibility study on using surface treated kaolin mineral in thermoplastic composites (opens in a new tab)

  15. Exploring the Feasibility of Innovative Integration of Phase Change Materials for Thermo-Adaptive Asphalt Pavements

    … asphalt binder which resulted in improving the thermal regulation of asphalt binder. In the next incorporation method, among eight types of composite phase change materials (CPCMs) developed in the lab, the composite of polyethylene glycol and diatomite was found as the efficient one regarding …

    must-thes Repository record for Exploring the Feasibility of Innovative Integration of Phase Change Materials for Thermo-Adaptive Asphalt Pavements (opens in a new tab)

  16. Estudo histopatológico da polpa de dentes unirradiculares de humanos, portadores de doença periodontal envolvendo o ápice radicular

    … support tissues. Pulp vitality was evaluated by thermal tests and test cavity. After the teeth had been extracted the crowns were separated from the roots at the cementum-enamel junction. The samples was fixed in 1 O % formalin solution, decalcified, embebbed in parafin, cut, stained with …

    brazil-uerj Repository record for Estudo histopatológico da polpa de dentes unirradiculares de humanos, portadores de doença periodontal envolvendo o ápice radicular (opens in a new tab)

  17. Thermo-Mechanical Characteristics of Polyethylene/Tobacco Lignin Blends

    … In the second stage, mechanical, physical and thermal tests were conducted to analyze the effects of blending on the performance of the resulting products. Tensile tests were performed to evaluate the ultimate tensile strength (UTS), Young’s modulus and elongation at break for each blend …

    umn Repository record for Thermo-Mechanical Characteristics of Polyethylene/Tobacco Lignin Blends (opens in a new tab)

  18. Programmable Mechanical Metamaterials with Negative Poisson's Ratio and Negative Thermal Expansion

    … was used to measure base materials' modulus and thermal expansion coefficient as a function of temperature. CPS, the unit cell of the metamaterial, is composed of circular holes and slits. By decomposing kinematic rotation of the arm and elastic deformation of a bi-material hinge, …

    unt Repository record for Programmable Mechanical Metamaterials with Negative Poisson's Ratio and Negative Thermal Expansion (opens in a new tab)

  19. Revestimento decorativo monocamada pigmentado, com resíduo de vidro temperado, para aplicação em fachadas

    … in colors red, yellow and blue. Mechanical tests were carried out on fresh pasta and hardened, as well as for the applied coating on masonry, so as to demonstrate the feasibility of the material. In addition, it verified the adequacy of the RDM built environment by means of thermal tests. …

    brazil-ufrn Repository record for Revestimento decorativo monocamada pigmentado, com resíduo de vidro temperado, para aplicação em fachadas (opens in a new tab)

Page 1 of 2