Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 53 for “"TOUGH2"”.

  1. Algorithm for optimal well placement in geothermal systems based on TOUGH2 models

    … has been developed that utilizes a numerical TOUGH2 model of a geothermal system to evaluate the optimal well placement based on a net present value estimation. The algorithm was tested using a hypothetical model and found the optimal wells to be in the hottest parts of the model at depth and …

    reykjavik Repository record for Algorithm for optimal well placement in geothermal systems based on TOUGH2 models (opens in a new tab)

  2. 3D conceptual and TOUGH2 modelling of the Waiotapu geothermal field, New Zealand

    … model was used as the basis of a numerical TOUGH2 model. The numerical model was calibrated to measured well temperature and the result of this calibration shows the temperature, permeability, and fluid flow distribution of the system. Modelled results indicate that the Waikite area can …

    reykjavik Repository record for 3D conceptual and TOUGH2 modelling of the Waiotapu geothermal field, New Zealand (opens in a new tab)

  3. Coupling tough2 and SEAWAT variable-density models to understand potential geologic carbon sequestration impacts on groundwater resources

    … Illinois Basin is sought by coupling two codes. TOUGH2 is suitable for simulating multiphase and variable density flow problems such as GCS, while SEAWAT is suitable for variable density, groundwater flow problems. Rather than using a single TOUGH2 model, coupling SEAWAT and TOUGH2 lowers the …

    uiuc Repository record for Coupling tough2 and SEAWAT variable-density models to understand potential geologic carbon sequestration impacts on groundwater resources (opens in a new tab)

  4. Numerical Simulation and Optimization of CO2 Sequestration in Saline Aquifers

    … conducted using the DOE multi-phase flow solver TOUGH2: Transport of Unsaturated Groundwater and Heat). A multi-objective optimization code based on genetic algorithm is developed to optimize the GCS operation for a given geological formation. Most of the studies are conducted forxvisequestration …

    wustl Repository record for Numerical Simulation and Optimization of CO2 Sequestration in Saline Aquifers (opens in a new tab)

  5. MODELING SOIL RESPONSE TO INTENSE HEATING FROM TUNNEL FIRES

    … code, FLUENT and a special porous media code, TOUGH2, are used. The conservation equations for porous media in each program are discussed and the numerical models are established. Two-dimensional simulations for the saturated coarse sand and the saturated fine sand are conducted and the results …

    maryland Repository record for MODELING SOIL RESPONSE TO INTENSE HEATING FROM TUNNEL FIRES (opens in a new tab)

  6. SIMULATION OF COMPLEX MULTIPHASE, MULTI-COMPONENT, REACTING FLOWS IN POROUS MEDIA

    … combustion of coal is described, based on the TOUGH2 code. A new equation of state (EOS) module is developed including realistic physical properties for all gases involved. The modified version of TOUGH2 is used for modelling the adiabatic method for testing the reactivity of coal samples. The …

    auckland-ms Repository record for SIMULATION OF COMPLEX MULTIPHASE, MULTI-COMPONENT, REACTING FLOWS IN POROUS MEDIA (opens in a new tab)

  7. Uncertainty analysis of radionuclide transport in the unsaturated zone at Yucca Mountain

    … to a three-dimensional flow and transport code, TOUGH2 developed by the Lawrence Berkeley National Laboratory. By running TOUGH2 for multiple parameter realizations, means, variances, 5% and 95% percentiles of flow and radionuclide transport simulations were estimated to quantify the optimum …

    unlv Repository record for Uncertainty analysis of radionuclide transport in the unsaturated zone at Yucca Mountain (opens in a new tab) Download PDF for Uncertainty analysis of radionuclide transport in the unsaturated zone at Yucca Mountain (opens in a new tab)

  8. Numerical Simulation and Optimization of Carbon Dioxide Utilization and Storage in Enhanced Gas Recovery and Enhanced Geothermal Systems

    … conducted using the DOE multiphase flow solver TOUGH2 (Transport of Unsaturated Groundwater and Heat). A previously developed multi-objective optimization code based on a genetic algorithm is modified for applications to EGR and EGS. For EGR study, a model problem based on a benchmark-study that …

    wustl Repository record for Numerical Simulation and Optimization of Carbon Dioxide Utilization and Storage in Enhanced Gas Recovery and Enhanced Geothermal Systems (opens in a new tab)

  9. Modelling of Subsidence in Geothermal Fields

    … using a coupled approach where two codes (TOUGH2 and ABAQUS) were used to model subsidence. The TOUGH2 code is an established finite volume code that simulates complex multiphase, multi-component subsurface flows. It is used worldwide to model geothermal reservoirs. ABAQUS code is a special …

    auckland-ms Repository record for Modelling of Subsidence in Geothermal Fields (opens in a new tab)

  10. Modelling the La Soufrière hydrothermal system, St. Vincent and the Grenadines

    … and was subsequently used as the basis for the TOUGH2 numerical model. A natural state TOUGH2 model was calibrated using downhole temperature data from 3 wells drilled in St. Vincent and the location of areas of high surface heat flow. This provides an initial, physically realistic model of the …

    reykjavik Repository record for Modelling the La Soufrière hydrothermal system, St. Vincent and the Grenadines (opens in a new tab)

  11. Modelling and interpretation of CO2 injection within the Ohaaki geothermal reservoir

    … field, located in New Zealand. The use of TOUGH2, AUTOUGH2 geothermal simulators and T.I.M will aid in understanding the direction of the migration of CO2 within the reservoir as well as the potential for it to reach the surface after 5,10, 15 and 20 years of injection. A modelling study of …

    reykjavik Repository record for Modelling and interpretation of CO2 injection within the Ohaaki geothermal reservoir (opens in a new tab)

  12. Deep hydrology of the geothermal systems in the Taupo Volcanic Zone, New Zealand

    … has been developed for the geothermal simulator TOUGH2, which can describe the flow of water at the conditions expected deep in the TVZ. The code is used to simulate the behaviour of a range of idealised TVZ models in 2D and 3D settings. Hydrothermal plumes which remain stable for periods …

    auckland-ms Repository record for Deep hydrology of the geothermal systems in the Taupo Volcanic Zone, New Zealand (opens in a new tab)

  13. Carbon Dioxide Enhanced Oil Recovery from the Citronelle Oil Field and Carbon Sequestration in the Donovan Sand, Southwest Alabama

    … by computer simulations using MASTER 3.0, TOUGH2-ECO2N, and TOUGHREACT. Results using MASTER 3.0, for simulation of CO2-EOR, indicated that nearly 50 million barrels of additional oil could be produced by tertiary recovery. Results using TOUGH2-ECO2N and TOUGHREACT, for the simulations of …

    uab Repository record for Carbon Dioxide Enhanced Oil Recovery from the Citronelle Oil Field and Carbon Sequestration in the Donovan Sand, Southwest Alabama (opens in a new tab)

  14. EXPERIMENTAL AND NUMERICAL CHARACTERISTICS OF SOIL RESPONSE TO INTENSE HEATING

    … intense heat flux. A special porous media code, TOUGH2, is applied for numerical analyses. Improvements are made to previous experimental facilities, and new experimental results are used to characterize the heat and mass transfer physics in the soil and verify simulations. A two-zone structure …

    maryland Repository record for EXPERIMENTAL AND NUMERICAL CHARACTERISTICS OF SOIL RESPONSE TO INTENSE HEATING (opens in a new tab)

  15. Investigation of modeling permeable aquifers at the contact zones of basaltic lava flows

    … injection scenario using numerical simulator AUTOUGH2. This study developed the modelling workflow and the scripts required to generate the models and plot the results graphically. Thus, actual numerical models were also developed which represent an initial approach to the question of how to …

    reykjavik Repository record for Investigation of modeling permeable aquifers at the contact zones of basaltic lava flows (opens in a new tab)

  16. Steady state numerical modelling of Los Humeros goethermal field

    … the system. Based on this conceptualization, a TOUGH2 numerical model was calibrated with field data, namely the temperature for depth profiles from the existing wells. The results shows that La Antigua fault could be the main conduit for heat and flow, which matched measured well temperatures …

    reykjavik Repository record for Steady state numerical modelling of Los Humeros goethermal field (opens in a new tab)

  17. Numerical modeling of the Hágöngur geothermal reservoir in Central Iceland

    … temperature and pressure values using the TOUGH2 simulator via the graphical user interface PetraSim. PetraSim was also employed to define and calibrate cell-specific data such as heat sources and initial conditions to create two versions of the natural state model of the reservoir.

    reykjavik Repository record for Numerical modeling of the Hágöngur geothermal reservoir in Central Iceland (opens in a new tab)

  18. Enhanced CO2 Storage in Confined Geologic Formations

    … the agreement between the analytical model and TOUGH2 strongly depends on irreducible brine saturation, gravity and on the relationship between relative permeability and brine saturation. A series of numerical experiments have been conducted to study the pros and cons of different injection …

    usf Repository record for Enhanced CO2 Storage in Confined Geologic Formations (opens in a new tab)

  19. Feasibility Study of Thermal Treatment for Mercury Removal from Soils

    … simulation. The Department of Energy’s TOUGH2/TMVOC Code was developed at the Lawrence Berkeley National Laboratory and was used to evaluate the potential effectiveness of thermal treatment to remediate elemental mercury. TMVOC is a three phase non-isothermal numerical simulator for …

    clemson Repository record for Feasibility Study of Thermal Treatment for Mercury Removal from Soils (opens in a new tab)

  20. Effects of Controlling Parameters and Their Spatial Variability on Heat Flow in the Vadose Zone

    … on heat transport in the vadose zone. The TOUGH2 computer program is used to numerically simulate heat, water, and air transport through two-dimensional porous media. A 100 by 100 meter grid was created with a water table at the lower boundary held constant at 95°C and the average surface …

    unr Repository record for Effects of Controlling Parameters and Their Spatial Variability on Heat Flow in the Vadose Zone (opens in a new tab)

Page 1 of 3