Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 17 of 17 for “"TURBOGENERATOR"”.

  1. An investigation of turbogenerator dynamics and control

    … an investigation of the dynamics and control of turbogenerators from a multivariable control viewpoint. The multivariate control framework chosen -Individual Channel Analysis and Design- is particularly appropriate since it encapsulates the dynamical characteristics of the uncontrolled system …

    glasgow Download PDF for An investigation of turbogenerator dynamics and control (opens in a new tab)

  2. Conceptual design and layout of the balance of plant for a generation IV nuclear power plant using the Westinghouse International Reactor, Innovative & Secure (IRIS)

    … pressure and one low-pressure tandem compound turbogenerator unit. The sizes and the weights of these components along with the piping involved with the layout are determined. The final layout of the plant is 100 meters long by 40 meters wide with an approximate weight of 7400 tons. Drawings of …

    ut-knoxville Repository record for Conceptual design and layout of the balance of plant for a generation IV nuclear power plant using the Westinghouse International Reactor, Innovative & Secure (IRIS) (opens in a new tab)

  3. Diagnosis of arcing in retaining rings of turbogenerators

    … and most highly stressed component of the entire turbogenerator system. Arcing in retaining rings is a very serious problem and could easily escalate to a full-blown failure. In this project we diagnose arcing in the retaining rings. We determine the most likely mechanism by which arcing occurs …

    uiuc Repository record for Diagnosis of arcing in retaining rings of turbogenerators (opens in a new tab)

  4. PRODUCTION OF SHAFT-VOLTAGES IN TURBOGENERATORS WITH PARTICULAR REFERENCE TO STATIC EXCITATION

    … type rotating exciters in modern large turbogenerator units. The use of static exciters has introduced a special kind of shaft-voltage in turbogenerators. 'This results in currents which damage the machine components such as bearings, seals, gears, etc., by arcing, pitting and oxidation, …

    sask Repository record for PRODUCTION OF SHAFT-VOLTAGES IN TURBOGENERATORS WITH PARTICULAR REFERENCE TO STATIC EXCITATION (opens in a new tab)

  5. Modeling and control of a supercritical coal fired boiler

    … in order to generate electric power with a turbogenerator. The heat of superheat is all recoverable in the turbine. A variation in the steam temperature and pressure, etc., may cause an unequal expansion and contractions in the turbine parts. Rapid and excessive changes can result in damage …

    ttu Repository record for Modeling and control of a supercritical coal fired boiler (opens in a new tab)

  6. Design and development of combustor for micro gas turbine engine

    … design and development of a combustor for a turbogenerator with a radial configuration as a future range extender for electric vehicles. A novel curved-shape combustor is proposed, and a computational fluid dynamics (CFD) model was constructed to study the combustor performance. The modelling …

    birmingham Download PDF for Design and development of combustor for micro gas turbine engine (opens in a new tab)

  7. Magnetic Machines for Microengine Power Generation

    … use in a microengine. Similar to a macroscale turbogenerator, a microengine comprises a small, gas-fueled turbine engine for converting chemical fuel energy into mechanical power and an integrated electrical generator for converting mechanical power to electrical power. The microengine system …

    gatech Repository record for Magnetic Machines for Microengine Power Generation (opens in a new tab)

  8. Feasibility analysis of a hybrid poplar-based biorefinery in southwestern Washington

    … eliminating the need for an in-house boiler/turbogenerator and wastewater treatment system by using a multi-effect evaporator to evaporate waste streams into combustible syrup for steam production. Two additional design cases are further evaluated for comparison: (1) Non-integrated design …

    washington Repository record for Feasibility analysis of a hybrid poplar-based biorefinery in southwestern Washington (opens in a new tab)

  9. Induction generators in mini and micro hydro applications as a low cost alternative

    … sub-systems like the induction generator and turbogenerator are replaced by their real physical scaled down models while others are simulated on microcomputers controlling these generators. The chief purpose of the real-time simulation model is to study the behaviour of a minihydro power …

    auckland-ms Repository record for Induction generators in mini and micro hydro applications as a low cost alternative (opens in a new tab)

  10. Kogeneracinės elektrinės darbo efektyvumo tyrimas /

    Cogeneration is a technologically progressive thermal and electrical production mode. It is especially relevancy in Lithuania, because there is the big production requirement of thermal in Lithuania, there are done the reconstructions of thermal and electrical economy, alternate their juristical …

    vilnius Repository record for Kogeneracinės elektrinės darbo efektyvumo tyrimas / (opens in a new tab)

  11. Online UHF measurement of partial discharge in stator windings using microstrip patch antennas

    Partial Discharge (PD) is the electrical discharge resulting from the partial dielectric breakdown of voids in electrical insulation. PD is a phenomenon that can be measured from conducted currents or radiated emissions and can be used to help evaluate the condition of rotating machine winding …

    manitoba Repository record for Online UHF measurement of partial discharge in stator windings using microstrip patch antennas (opens in a new tab)

  12. Parní turbina rychloběžná

    Tato diplomová práce je zaměřena na konstrukci rychloběžné parní turbíny pro dané parametry od společnosti G-Team a.s. ve Velké Bíteši. V úvodní části diplomové práce je krátce zmíněno o historickém vývoji parních turbín, transformační proces a pracovní princip. Ve stěžejní části diplomové práce je …

    brno-tech Repository record for Parní turbina rychloběžná (opens in a new tab)

  13. Turbogenerátory v jaderných elektrárnách

    Cílem práce je ověřit využitelnost analytických metod pro určení termodynamických parametrů páry při průchodu parní turbínou, a to výpočtem a následným porovnání s reálnými daty z jaderné elektrárny Dukovany. Výpočet je doplněn stručným shrnutím principu výroby el. energie v jaderných elektrárnách …

    brno-tech Repository record for Turbogenerátory v jaderných elektrárnách (opens in a new tab)

  14. ΣΥΖΕΥΓΜΕΝΕΣ ΤΑΛΑΝΤΩΣΕΙΣ ΑΞΟΝΩΝ ΜΕ ΡΩΓΜΗ

    A TRANSVERSE CRACK ON A SHAFT CAUSES A COMPLIANCE (LOCAL FLEXIBILITY). THIS COMPLIANCE IS REPRESENTED BY A MATRIX 6X6, WHICH IS CALCULATED ANALYTICALLY. THE ASSYMETRY IN THE CRACK AREA CAUSES COUPLED VIBRATIONS. THIS PROPERTY IS USED TO DEVELOP A NEW METHOD FOR THE DETECTION OF A CRACK IN ROTATING …

    greece Repository record for ΣΥΖΕΥΓΜΕΝΕΣ ΤΑΛΑΝΤΩΣΕΙΣ ΑΞΟΝΩΝ ΜΕ ΡΩΓΜΗ (opens in a new tab)

  15. Zvýšení výkonu turbosoustrojí v EDU výměnou NTO

    Diplomová práce na téma Zvýšení výkonu turbosoustrojí v EDU výměnou NTO detailně popisuje důležitá zařízení technologických systémů sekundárního okruhu Jaderné elektrárny Dukovany, společně s jejich úkolem v tepelném oběhu. V hlavní části práce je vypracován výpočtový model sekundárního okruhu dle …

    brno-tech Repository record for Zvýšení výkonu turbosoustrojí v EDU výměnou NTO (opens in a new tab)