Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 32 for “"Tabletting"”.
-
Encapsulation of dried yeast cells as probiotics by tabletting
… dried yeast, however, the main challenge of tabletting a powder mixture containing yeast granules is the mechanical sensitivity of the cells. The objective of this work was to develop a rigid yeast tablet containing adequate numbers of viable yeast cells by optimizing the formulation to allow …
-
Condition monitoring of pharmaceutical powder compression during tabletting using acoustic emission
… the complex physical changes which occur during tabletting. Capping and lamination are serious problems that are encountered during tabletting. A capped or laminated tablet is one which no longer retains its mechanical integrity and exhibit low strength characteristics. Capping and lamination can …
-
Powder characteristics and tabletting of nevirapine prepared by a novel process : a solubility and stability study
… a powder may influence its bulk performance, its tabletting properties and handling. During the synthesis process of an API, the crystal form is dependent on the solvent being used in the final stage of recrystallisation. Usually, the particle size is too large for use as is, in which case milling …
-
Engineering of composite pharmaceuticals with improved physicochemical and mechanical properties
Tabletting by direct compression (DC) is the preferred method of tabletting as compared to granulation techniques because among other benefits it is simple, quick, and cost-effective. However, most pharmaceutical powders are not compressible via DC due to poor flowability, compactibility, …
-
Determination of compaction parameters of pharmaceutical powders with an instrumented hydraulic press
Prediction of the tabletting behavior of powdered drugs is of great importance in the pharmaceutical industry. An instrumented hydraulic press and punch and die assembly were used to study compaction behavior of 5 widely used pharmaceutical materials, Avicel, Emcompress, spray-dried lactose, …
-
Roll compaction of pharmaceutical excipients
… unit operations (i.e. roll compaction, milling, tabletting), as well as their correlations. Roll compaction experiments were carried out using an instrumented roll compactor with a gravity feeding system. The influence of the process parameters, material properties and powder conditioning were …
-
Crystallinity changes and phase transitions of selected pharmaceutical solids with processing
… affected by processing (e.g. grinding, tabletting, heating and additive incorporation) and reflect structural changes within a solid. Such changes may involve alterations in both the chemical and physical nature of the crystal structure (e.g. hydrates), complete rearrangements of the …
-
From crystal to tablet : structural insights into the compression behaviour of pharmaceutical solids
… to the macroscopic scale, with relevance to the tabletting process. The compression of racemic ofloxacin and chiral forms ?-levofloxacin and levofloxacin hemihydrate was followed using single-crystal and powder X-ray diffraction across hydrostatic and non-hydrostatic conditions, with Raman …
-
The effect of speed of compression on the properties of compacts.
… time profiles seen on any production tabletting machine. The system has been validated to monitor punch displacements to ?12pm and loads to ?O.05% of full scale. Confidence in the results obtained using the Simulator were enhanced by comparison with other operational Simulators. The …
-
The agglomeration of cement to facilitate transportation.
… of producing cement agglomerates may be tabletting of dry cement powder with very small amounts of disintegrants. Using plain cement resulted in very hard tablet formation. These tablets gave only a 0.5 wt% loss when shaken in sieves for a period of fifteeen minutes. Addition of 5wt% …
-
Application of nanocoatings produced by electrostatic layer-by-layer self-assembling to improve the physicochemical properties of drugs and excipients
… cellulose into powders with positive tabletting properties which can be used in direct compression in the tabletting process. The cellulose microfibers which were coated with four PSS/PVP bilayers, display the best compaction properties. One of the major advantages of nanocoating is …
-
Prediction of the Mechanical Properties of Molecular Crystals Based Upon Their Crystallographic Structure
… are of significant interest in the drug dosage tabletting. Insights into the APIs mechanical behaviour not only assist in the selection of optimum tabletting process but the choice of suitable excipients for dosage blend. Prediction of the mechanical properties of seven solid forms was described …
-
Development of a solid oral dosage form containing Artemisia afra extract
… required to formulate a final powder mixture for tabletting was calculated. The formulated tablet mass was calculated based on 200 mg of dry A. afra powder extract inside each tablet. The A. afra dry powder extract was mixed with the corrective excipient mixture and compressed into 12 mm diameter …
-
Pharmaceutical formulation development utilizing hot melt extrusion and other techniques for development of immediate and controlled release dosage forms
… to the component systems which find utility in tabletting applications. Extruded matrices were compressed into tablets and tabletability profiles generated. Simultaneously tablet hardness evaluation was performed using conventional characterization techniques as well as using a texture analyzer. …
-
LOW DOSE TABLET MANUFACTURING: INFLUENCE OF EXCIPIENT SURFACE ROUGHNESS AND IN-LINE PROCESS MONITORING USING NIR SPECTROSCOPY
… dealt with in-line monitoring of blending and tabletting unit operations using near infrared (NIR) spectroscopy. Findings of this study showed that with the unique features of NIR spectroscopy, i.e. high speed sampling and rapid spectral acquisition, simultaneous distribution of both drug and …
-
The role of moisture profiling towards understanding pharmaceutical solid state functionality. Validation and the application of a moisture profiling analytical tool for investigation into the characterisation of and prediction of the effects of compaction and storage on different lactose physical forms
… supplementary analysis. Secondly the effects of tabletting were explored, different compaction forces were investigated to observe if this had any notable effects on equilibrium relative humidity of the different lactose forms. Finally subsequent storage of the compacts were examined in order to …
-
Formulation and evaluation of diclofenac sodium dispersible tablets
… concentrations of 2% and 5% of the tablet mass. Tabletting was performed using a Cadmach® (India) single-punch tabletting machine. The four formulations were put on accelerated stability according to ICH guidelines for three months at 25°C/60%RH, 30°C/65%RH and 40°C/75%RH. HPLC was used to …
-
Exploring new applications for photophysically encoded microcarriers
… produced by granulation did not deform during tabletting and that the code in the beads remained readable. We also found evidence that, after oral intake, the encoded microparticles are highly unlikely toxic to humans.
-
Ultrasound Assisted Processing of Solid State Pharmaceuticals. The application of ultrasonic energy in novel solid state pharmaceutical applications, including solvent free co-crystallisation (SFCC) and enhanced compressibility
… drugs without the need to use a conventional tabletting machine.
-
COMPRESSION AND MOISTURE EFFECTS ON THE STABILITY OF DRY VITAMIN A ACETATE IN COMPRESSED TABLETS
… relationship between ompression force during tabletting and also any additional effect that may be contributed dur—ing slugging. To evaluate the resistance of the gelatin beadlets to the des-tructive forces existing during tablet compression a number of dif-ferent tests were employed. Dry …
Page 1 of 2