Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"Tapped density"”.
-
Fractionation of Corn Stover with Effective Shredding and Separation
… different traits (leachate ion conductivity, tapped density and hyperspectral reflectance intensity) were analyzed for samples of individual tissues as well as constructed calibration blends to build and evaluate the multi-trait model. All samples were milled in a cyclone mill with a 1-mm …
-
Evaluation of Vacuum Packaging on the Physical Properties, Solubility, and Storage Space of Dairy Powders
… 12 months storage on particle size, particle density, bulk density, tapped density, flowability, compressibility, color, moisture content, surface morphology, and solubility of six types of dairy powders. In addition, the effect of dairy ingredients type was also assessed. Commercial samples …
-
Design and fabrication of a tapped densification apparatus for bulk solids
… property is a measurement quantity known as the tapped density. Here, a container of granular material is subjected to a long sequence of discrete taps, after which the bulk density - the total mass divided by the volume occupied -- is determined. Current technology exists to achieve the maximum …
-
Steam explosion of biomass to produce durable wood pellets
… (0.4 mm and 0.9 mm). It was found that the bulk density and tapped density of steam treated wood increased with the treatment severity. The pellets made with biomass treated at different combinations of temperature-time were 1.4 to 3.3 times stronger than untreated pellets. The steam treated …
-
Co-encapsulation of β-carotene, lutein, zeaxanthin and fish oil: An investigation of drying kinetics, powder properties, in vitro digestion and cellular uptake of carotenoids
… a better reconstitution quality, a higher density (tapped density of 0.37g/cm3) and a higher flowability (Carr’s index of 15.8%). The Tg showed a strong relationship with wall material type while not with the wall-to-core ratio. Comparing the three drying methods (MFJSD, SD and FD), the …
-
Development of spectroscopic non-invasive assessment for quality of dairy powders
… of the dairy powders, such as bulk and tapped densities, insolubility index, surface free fat, moisture content and colour, were assessed using standard methods. Volatile analyses were performed using GC-MS, whilst the surface composition and microstructure of the powder particles were …
-
The influence of granulation methods and particle size on pharmaceutical granules flowability using ring shear tester and particle image velocimetry
… methods such as, angle of repose, bulk and tapped density, Carr’s index and Hausner Ratio. Schulze (2002) developed a fully automated ring shear cell RST-XS to measure the powder flow quantitatively using different loads which is used in this study. The output results were used to measure …
-
Revalorization, characterization and application of tofu industry by-product ‘okara’ as a food ingredient : a thesis presented in partial fulfilment of the requirements for the degree of Master of Food Technology, Massey University, New Zealand
… water-holding capacity, solubility, bulk density, tapped density, Carr Index and flowability, were also assessed, as these influence food formulation and development. The best drying conditions were determined based on drying time, water activity, water-holding capacity, particle size, and …
-
Development and evaluation of an oral fixed–dose triple combination dosage form for artesunate, dapsone and proguanil
… of repose; critical orifice diameter (COD); bulk density and tapped density; and flow rate. Tablets of the two optimised powder formulations were compressed. The tablets were evaluated and characterised in terms of weight variation, friability, crushing strength, disintegration and dissolution …
-
Nanotechnology in pulmonary drug delivery: Compressible proliposome formulations for nebulization
… were assessed in terms of flowability via tapped density (17.81 + 4.46%) and angle of repose (25.62 + 1.08°), classifying sorbitol as possessing good to excellent flowability. Upon tableting of sorbitol and D-mannitol, formulations at lipid to carrier ratios of 1:10 and 1:15 w/w; were …
-
Effect of dry particle coating on the properties of cohesive pharmaceutical powders
… both novel methods, such as vibrated packed density, as well as industry standard techniques such as shear testing via the Schulze tester, the Freeman FT4 Rheometer and the Hosokawa Powder Tester. Other powder properties such as bulk and tapped densities are also evaluated. The results of …
-
Performance Analytics for Electron Beam Powder Bed Fusion of Ti-6Al-4V
… measured response in powder size distribution, tapped density, Hausner ratio, Carr index, basic flow energy and specific energy, dynamic angle of repose, oxygen and nitrogen content, while the bulk density remained largely unchanged. The morphology of the powder showed extensive physical changes …
-
Development of lipid matrix tablets containing a double fixed dose combination of artemisone and lumefantrine
… were characterised by means of bulk- and tapped density; critical orifice diameter (COD); angle of repose; and flow rate. Furthermore, all formulations were tableted by means of direct compression. The lipid-matrix tablets were assessed and characterised in terms of friability, crushing …
-
Μελέτη της παραλαβής πηκτινών από απόβλητα εσπεριδοειδών και της αξιοποίησής τους ως λειτουργικά συστατικά από τη βιομηχανία τροφίμων
… all pectins resulted in films with the same density (~1.0 and 1.2 g/cm³, for the dittany and anise films, respectively). Regarding the mechanical properties, values of ~2 – 4.7 N and ~77 – 191 kPa were recorded for the maximum strength and elasticity of the films, respectively. The film of …