Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 15 of 15 for “"Tauc Plot"”.

  1. Studium optických vlastností tenkých vrstev perovskitů a jejich prekurzorů

    … elipsometrickou charakterizaci za pomoci metody Tauc plot, modelování a fitování experimentálně získaných dat, které vedly ke stanovení indexu lomu, absorpčního koeficientu a šířky zakázaného pásu jednotlivých materiálů.

    brno-tech Repository record for Studium optických vlastností tenkých vrstev perovskitů a jejich prekurzorů (opens in a new tab)

  2. Fabrication and characterization of Mg-Ni hydride thin films for photovoltaic applications

    … and annealing processes were calculated using a Tauc-plot. We did Hall-measurements to investigate the electronic properties such as mobility, density and charge-carrier in the samples while the resisitivity were measured using a four point probe. Also during the annealing process an unexpected …

    chalmers Repository record for Fabrication and characterization of Mg-Ni hydride thin films for photovoltaic applications (opens in a new tab)

  3. Inorganic metal halide perovskite solar cell devices

    … by quantum efficiency measurement with the Tauc plot as 1.87 eV. Urbach energy was measured by subgap qe as 21 meV. CFT measurement indicated that deep defect states in the material has Gaussian distribution with peak value of 7E15 cm-3eV-1 located at 0.52 eV below the conduction band.</p> …

    iastate Repository record for Inorganic metal halide perovskite solar cell devices (opens in a new tab)

  4. Tuning the bandgap of an amorphous sputtered germanium photovoltaic cell.

    … alloys. UV/VIS spectroscopy and Tauc Plot band gap analysis indicated that tin inclusion led to band gap depression of 0.046 eV for every percentage increase in tin content in co-sputtered germanium-tin films. In sputtered amorphous germanium-tin films, increases in average …

    louisville Repository record for Tuning the bandgap of an amorphous sputtered germanium photovoltaic cell. (opens in a new tab)

  5. SYNTHESIS AND CHARACTERIZATION OF TUNGSTEN OXIDE AND MOLYBDENUM OXIDE IN POLYMER MATRICES

    … properties of the PMNCs. In particular, Tauc plot analysis was used to determine the bandgaps of these materials. Synthesizing WOₓ-FEP, WOₓ-PDMS, MoOₓ-FEP, and MoOₓ-PDMS PMNCs with the technique used here provides a viable pathway for production materials for green energy applications.

    jhu Repository record for SYNTHESIS AND CHARACTERIZATION OF TUNGSTEN OXIDE AND MOLYBDENUM OXIDE IN POLYMER MATRICES (opens in a new tab)

  6. Growth and Characterization of Tin-Asisted κ-(Ga1-XInX)2O3 Thin Films and Indium's Use as a Surfactant

    … and c. The optical bandgap is determined using a Tauc plot from the transmittance data and shows a decrease in the bandgap with increasing indium concentration. The refractive index is also shown to decrease with an increase in indium concentration. The growth of κ-Ga2O3 without the assistance of …

    texas-state Repository record for Growth and Characterization of Tin-Asisted κ-(Ga1-XInX)2O3 Thin Films and Indium's Use as a Surfactant (opens in a new tab)

  7. Organometallic routes to colloidal zinc oxide nanoparticles and layered zinc hydroxides

    … of electronic properties (UV-Vis, Tauc plot), solid-state structure (XRD) and composition (ICP-OES, XPS) confirms the substitutional doping in all cases. Under the same catalysis conditions outlined in Chapter 4, all the nanocatalysts display higher activity and better stability …

    oxford Repository record for Organometallic routes to colloidal zinc oxide nanoparticles and layered zinc hydroxides (opens in a new tab)

  8. Black Titanium Dioxide: Synthesis, Characterization and Applications

    … and X-ray photoelectron spectroscope (XPS). Tauc plot results show that black TiO2 has smaller band gap than white TiO2. XPS revealed the existence of surface -OH species and Ti3+ in black TiO2. Furthermore, these two characterization techniques and XRD all proved that the blackening and …

    ottawa-retro Repository record for Black Titanium Dioxide: Synthesis, Characterization and Applications (opens in a new tab)

  9. Perovskite oxynitrides of tantalum, titanium and niobium and their solid solutions as self-cleaning coatings.

    … Optical band gaps were calculated from the Tauc plot derived from the Kubelka-Munk function and were found in the range of 1.7-2.4 eV. A cobalt oxide co-catalyst (CoOx) was deposited onto each film by drop casting and the photocatalytic activity was assessed under visible light using …

    soton Download PDF for Perovskite oxynitrides of tantalum, titanium and niobium and their solid solutions as self-cleaning coatings. (opens in a new tab)

  10. In2Se3-based two-dimensional photocatalysts for water-splitting

    … by experimental band structure alignment (by Tauc plot and ultraviolet photoelectron spectroscopy (UPS)), which further leads to prolonged exciton lifetime as shown in TRPL analysis.</p> <p>In conclusion, this thesis has investigated experimentally that 2D-In<sub>2</sub>Se<sub>3</sub> exhibits …

    oxford Repository record for In2Se3-based two-dimensional photocatalysts for water-splitting (opens in a new tab)

  11. Ανάπτυξη και μελέτη μονοστρωματικών και πολυστρωματικών νανοδομικών επικαλύψεων

    … Color variations were identified through the Tauc-plot method which provides a wide band gap through the extrapolation of the linear part of ω·[ε2(ω)]1/2 to zero coordinate. According to SE results variations in stoichiometry, away from the ideal x = 1, can be attributed to N vacancies in the …

    greece Repository record for Ανάπτυξη και μελέτη μονοστρωματικών και πολυστρωματικών νανοδομικών επικαλύψεων (opens in a new tab)

  12. Use phase performances of photocatalytic cements

    … in photocatalytic paste. The slope of the Tauc plot, which relates absorbance and photon energy, was used to represent the photoconductance of the samples. Carbonated samples had a higher slope than the noncarbonated samples indicating a higher photoconductance in the carbonated samples. …

    uiuc Repository record for Use phase performances of photocatalytic cements (opens in a new tab)

  13. Advanced Optical and Thermoreflectance Spectroscopy of Thermal and Electronic Properties in Cubic Boron Arsenide

    … is developed to correct baseline absorption in Tauc plots, enabling more reliable extraction of semiconductor bandgaps. The method is validated using both simulated data and experimental measurements, including application to c-BAs. Overall, this dissertation establishes a robust and versatile …

    houston Repository record for Advanced Optical and Thermoreflectance Spectroscopy of Thermal and Electronic Properties in Cubic Boron Arsenide (opens in a new tab) Embargoed until 2028-05-01

  14. An Investigation on the Band Gap and Band Edge of Semi-Conducting Lanthanum Transition Metal Perovskites for Photocatalytic Applications

    For the past few decades, a frenzy of attention has been given towards the development of an assortment of photocatalysts as a solution for various environmental problems. TiO2 is the most widely used photocatalyst. TiO2 is biocompatible, chemically and thermally stable but TiO2 and a vast majority …

    usf Repository record for An Investigation on the Band Gap and Band Edge of Semi-Conducting Lanthanum Transition Metal Perovskites for Photocatalytic Applications (opens in a new tab)

  15. In-depth investigation and versatile kinetic modeling of adsorption and degradation processes in liquid and gas phase photocatalytic environmental remediation

    … FE-SEM, EDS, TEM, XPS, XRD, EPR, BET, PL, and Tauc plot. The kinetic model established in Chapter 4 is applied to experiments utilizing C-ZnO and R-ZnO at various pH values. The effect of pH on adsorption of TBZ was incorporated in the model through dissociation of TBZ using the same pKa values …

    ghent Repository record for In-depth investigation and versatile kinetic modeling of adsorption and degradation processes in liquid and gas phase photocatalytic environmental remediation (opens in a new tab)