Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"Taylor impact"”.
-
Taylor Impact Test and Penetration of Reinforced Concrete Targets by Cylindrical Composite Rods
… DYNA3D to analyze two problems: (a) the normal impact of a cylindrical monolithic or composite rod against a smooth flat rigid target, (commonly known as the Taylor impact test), and (b) the penetration of composite and monolithic steel cylindrical rods into reinforced concrete targets. The …
-
The analysis of dynamic stress and plastic wave propagation in the Taylor impact test
Thesis (Ph. D.)--Michigan State University. Department of Mechanical Engineering, 2006
-
Investigation of Taylor impact test of isotropic and anisotropic material through geometrical characteristics of specimens
… aluminum-lithium alloy) are investigated using Taylor impact tests. Coordinate measuring machines (CMMs) are used to measure the shape of specimens after the deformation. The geometrical data enables us to determine the plastic distributions and the dynamic yield stresses of specimens. A raise …
-
The chemical and mechanical behaviors of polymer / reactive metal systems under high strain rates
As one category of energetic materials, impact-initiated reactive materials are able to release a high amount of stored chemical energy under high strain rate impact loading, and are used extensively in civil and military applications. In general, polymers are introduced as binder materials to trap …
-
Stochastic Mean-Field Polycrystal Plasticity Methods
… the STM in a finite element simulation of the Taylor impact of two tantalum specimens. Our simulation predictions mimic the texture and deformation data measured from a powder metallurgy specimen. However, round-corner square rolled (RCSR) specimen simulations over-predict the texture …
-
An investigation into the effects of microstructure and texture on the high strain rate behaviour of Ti-6Al-4V
… behaviour of Ti-6Al-4V, this time under complex impact loading conditions, the classic Taylor impact experiment was adapted to include an optical measurement and geometry reconstruction technique. A novel experimental setup was designed that consists of an ultra-high speed camera and mirror …
-
MULTI-LEVEL CHARACTERIZATION OF PLASTICITY, FRACTURE, AND PHASE TRANSFORMATION IN METALS WITH HEXAGONAL CLOSE-PACKED STRUCTURE
… are followed by crystal plasticity modelling of Taylor impact test on zirconium to correlate experimental and predicted evolution of microstructure and shape change. Finally, a phase transformation in magnesium at high pressure is characterized using the state-of-the-art synchrotron radiation …
-
Finite Element Analysis of Adiabatic Shear Bands in Impact and Penetration Problems
… uranium (DU) and tungsten heavy alloy (WHA) rods impacting at normal incidence both a rigid, planar target and a thick, deformable steel target. Each deformable material is modeled as elastic thermoviscoplastic; the flow stress increases with an increase in the effective plastic strain and …
-
A study of the high strain rate behaviour of particle-reinforced metal matrix composites
… for comparison. Quasi-static tensile tests, Taylor impact tests, and high velocity penetration tests were conducted. The tension test results indicated that the reinforcement strongly affects the stiffness, strength and ductility. Some anisotropy was also observed. The Young's modulus values …
-
PHYSICS-BASED MODELING FRAMEWORK INCORPORATING MICROSTRUCTURAL EVOLUTION FOR PREDICTING DEFORMATION AND RECRYSTALLIZATION OF METALLIC MATERIALS
… proposed. The proposed models are verified on Taylor impact tests of Zr and Ta cylinders. Next, an algorithm for statistical description of intragranular fluctuations of crystallographic orientation is developed. The effects of the fluctuations of crystallographic orientation within the grains …
-
Mechanochemical Reactions and Strengthening in Epoxy-Cast Aluminum Iron-Oxide Mixtures
… to 10-2 1/s), medium-strain rate Charpy and Taylor impacts (103 to 104 1/s), and high-strain rate parallel-plate impacts (105 to 106 1/s). In general, structural strength and toughness have been observed to improve as the volume fraction of epoxy decreases, regardless of the loading strain …
-
The mechanochemistry in heterogeneous reactive powder mixtures under high-strain-rate loading and shock compression
… with uniaxial strain and uniaxial stress impact loading in highly heterogeneous metal powder-based reactive materials, specifically compacted mixtures of Ti/Al/B powders. This system was selected because of the large exothermic heat of reaction in the Ti+2B reaction, which can support the …
-
Dynamic and Quasi-Static Mechanical Properties of Fe-Ni Alloy Honeycomb
… with the fragmentation of the capsule during impact increased the likelihood of initiation and propagation of the energetic reaction. This multi-functional aspect of the LCA makes it a suitable capsule material.
-
On the dynamic response of additively manufactured 316L stainless steel and the development of an orthotropic Johnson-Cook viscoplastic strength model
… widely available CM equivalents. Precision impact testing to interrogate dynamic behaviour was achieved through means of reverse Taylor impact and plate impact spallation testing. This testing was undertaken on two distinct batches of AM 316L stainless steel, one possessing porosity just …
-
Mechanické chování oceli Strenx za vysokých rychlostí deformace
… rychlostí deformace bylo popsáno využitím Taylorova rázového testu, opět se vzorky s orientací vůči směru válcování. Kontura deformovaných vzorků z dynamické zkoušky byla proměřena obrazovou analýzou a vypočtena dynamická mez kluzu oceli Strenx. Výstupy zkoušek byly porovnány mezi …