Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 296 for “"Tensile loading"”.

  1. Residual Stress Distribution Changes During Dynamic Unidirectional Tensile Loading

    In recent years there has been much engineering effort channeled toward obtaining higher strength, lower weight and cost product designs. In pursuit of this goal some carefully designed and tested parts have catastrophically failed after a long history of repeated successful service, even though …

    byu Repository record for Residual Stress Distribution Changes During Dynamic Unidirectional Tensile Loading (opens in a new tab) Download PDF for Residual Stress Distribution Changes During Dynamic Unidirectional Tensile Loading (opens in a new tab)

  2. Characterization of Nanoporous Polyvinylidene Fluoride (PVDF) Sensors under Tensile Loading

    … effect on the sensor samples was studied under tensile loading, and the piezoelectric coefficient d31 was characterized. The results showed that the d31¬ value increased from ~15.8 pC/N to ~51.3 pC/N as the porosity increased from 0% to 23.7%. With a further increase in porosity, the d31 value …

    umn Repository record for Characterization of Nanoporous Polyvinylidene Fluoride (PVDF) Sensors under Tensile Loading (opens in a new tab)

  3. Mechanotransduction in Engineered Cartilaginous Tissues: In Vitro Oscillatory Tensile Loading

    … consisting of compressive, shear, and tensile forces. Therefore, engineered replacement tissues must be both mechanically and biologically competent to function after implantation. The goal of this work was to investigate the effects of oscillatory tensile loading on three dimensional …

    gatech Repository record for Mechanotransduction in Engineered Cartilaginous Tissues: In Vitro Oscillatory Tensile Loading (opens in a new tab)

  4. Adhesively Bonded Multi-Material Single Lap Joints Under Static Tensile Loading

    … single lap joints subjected to static tensile loading in the longitudinal direction. First, steel-to-steel and aluminum-to-aluminum joints are tested to establish baseline data. Subsequently, multi-material joints consisting of aluminum-to-steel, aluminum-to-composite, and …

    cuny Repository record for Adhesively Bonded Multi-Material Single Lap Joints Under Static Tensile Loading (opens in a new tab)

  5. Study on failure mechanisms of tufted composite laminates under tensile loading

    … particularly when exposed to transverse loading. To address this issue, through-thickness reinforcement (TTR) techniques can be utilized to enhance the delamination resistance of layered composites. Tufting techniques have gained popularity among engineers due to their ability to improve …

    ets-quebec Download PDF for Study on failure mechanisms of tufted composite laminates under tensile loading (opens in a new tab)

  6. Techniques for evaluating the behavior of apple skin under tensile loading

    … initial modulus of elasticity, secant modulus, tensile strength at break, and Poisson's ratio. The effect of displacement rate and specimen orientation on the strength was investigated. The apple skin was found to be anisotropic, with the maximum strength in a direction parallel to the core. It …

    vt Repository record for Techniques for evaluating the behavior of apple skin under tensile loading (opens in a new tab)

  7. Mechanical Failure of Metal/Ceramic Interfacial Regions under Shear and Tensile Loading

    … interfacial regions under shear and tensile loading is influenced by the structure and chemical composition of the interfacial region were observed and discussed. Interfacial shear failure experiments were carried out on focused ion beam fabricated micro pillars containing interfacial …

    lsu-thes Repository record for Mechanical Failure of Metal/Ceramic Interfacial Regions under Shear and Tensile Loading (opens in a new tab)

  8. Influence of silicon and aluminum on austenite deformation behavior during fatigue and tensile loading, The

    … austenite deformation response during fatigue loading. Independent alloying additions of 2.5 wt pct Si and Al were made to a base steel composition of 15 Ni - 11 Cr - 1 Mn - 0.03 C (wt pct). Weak beam dark field transmission electron microscopy (TEM) imaging of dissociated dislocations was …

    colo-mines Repository record for Influence of silicon and aluminum on austenite deformation behavior during fatigue and tensile loading, The (opens in a new tab)

  9. Characterization of Resistance Change in Stretchable Silver Ink Screen Printed on TPU-Laminated Fabrics Under Cyclic Tensile Loading

    … ink was screen printed to TPU sheets, then tensile coupons of the TPU, both bare and laminated to cotton, Denim and spandex fabric, were subjected to 1000 cycles of 20% uniaxial strain. In-situ resistance measurements of printed traces were processed to generate datasets of maximum and …

    calpoly Repository record for Characterization of Resistance Change in Stretchable Silver Ink Screen Printed on TPU-Laminated Fabrics Under Cyclic Tensile Loading (opens in a new tab)

  10. Regulatory Mechanisms in the Chondrogenesis of Mesenchymal Progenitors: The Roles of Cyclic Tensile Loading and Cell-Matrix Interactions

    … These studies explored the potential for cyclic tensile loading and chondrogenic factors, TGF-1 and dexamethsone, to promote fibrochondrocyte-specific differentiation of BMSCs. The application of cyclic tensile displacements to cell-seeded fibrin constructs promoted fibrochondrocyte patterns of …

    gatech Repository record for Regulatory Mechanisms in the Chondrogenesis of Mesenchymal Progenitors: The Roles of Cyclic Tensile Loading and Cell-Matrix Interactions (opens in a new tab)

  11. The effects of tensile loading and extracellular environmental cues on fibroblastic differntiation and extracellular matrix production by mesenchymal stem cells

    … phenotype. Specifically, the effects of cyclic tensile stimuli were studied in a biomaterial environment that provided controlled presentation of biological moieties. The influence of an enzymatically-degradable biomaterial environment on hMSC differentiation was investigated by creating …

    gatech Repository record for The effects of tensile loading and extracellular environmental cues on fibroblastic differntiation and extracellular matrix production by mesenchymal stem cells (opens in a new tab)

  12. In situ measurement of lattice strain using synchrotron radiation and a conical slit system

    … from an aluminum-lithium sample during tensile loading is presented in detail. The conical slit system at Argonne National Laboratory’s Advanced Photon Source is utilized to isolate a single grain with an orientation of interest from the highly textured alloy. A total of 39 reflections …

    uiuc Repository record for In situ measurement of lattice strain using synchrotron radiation and a conical slit system (opens in a new tab)

  13. Characterisation of Mechanical Behaviour of Engineered Cementitious Composites under Static and Fatigue Loading

    … cementitious composites, featuring outstanding tensile strain-hardening capacity with superior tensile strain capacity and multiple microcracking with self-controlled tight crack width. Due to the importance of the tensile behaviour of the ECC, a hierarchical multiscale modelling method is …

    unsw Repository record for Characterisation of Mechanical Behaviour of Engineered Cementitious Composites under Static and Fatigue Loading (opens in a new tab)

  14. Numerical Modeling of suction caissons in dense sand for general conditions of drainage

    … jacket in dense sands subjected to monotonic tensile loading. A two-dimensional, axisymmetric hydro-mechanical numerical model is developed to explore the effect of different drainage conditions on the vertical resistance. The suction pressure developed in response to different tensile loading …

    tamu Repository record for Numerical Modeling of suction caissons in dense sand for general conditions of drainage (opens in a new tab)

  15. Transverse microcracking in Celion 6000 graphite/PMR-15 polyimide composite

    The effects of room temperature tensile loading and five thermal loadings upon the development of transverse microcracks (TVM) in Celion 6000/PMR-15 graphite-epoxy laminates were investigated. Microcracks were observed using a replicating technique, microscopy and x-ray. The mechanical or thermal …

    vt Repository record for Transverse microcracking in Celion 6000 graphite/PMR-15 polyimide composite (opens in a new tab)

Page 1 of 15