Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 601 for “"Tensile test"”.
-
Ultrasonic Tensile Test Method for Brittle Materials
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Finite Element Simulation: Tensile test of rib cortical bone
… bone of PMHS analyzed by Kemper et al. with a tensile test [3]. It has been simulated a tensile test of a specimen of cortical bone of the rib with a FEM in Ls Dyna. The cortical bone has considered a piecewise linear plasticity material and it has been simulated with shell elements. The …
-
Design of special milling machine for machining tensile test specimens from sheet
Thesis (Mechanical Engineering)--University of Kansas, Mechanical Engineering, 1926.
-
Modeling of Acoustic Emission Failure Mechanism Data from a Unidirectional Fiberglass/Epoxy Tensile Test Specimen
… (AE) flaw growth data that resulted from the tensile test of a unidirectional fiberglass/epoxy specimen. The data collected and stored during the test were the six standard AE quantification parameters for each event. A classification neural network was used to sort the data into five failure …
-
Isolating Failure Mechanisms in a Fiberglass/Epoxy Tensile Test Specimen Using Acoustic Emission Signal Parameters
… in a 0° unidirectional, fiberglass/epoxy tensile test specimen. Since several failure mechanisms were known to be present, the lack of any distinctly identifiable bands in the original amplitude distribution indicated that there was considerable overlap between the AE signals of the …
-
Evaluation of the Rapid Rutting Test and High Temperature Indirect Tensile Test for practical use in asphalt mix design, quality assurance, and quality control
… has a large number of mixture performance tests available to evaluate a mix design's ability to withstand typical pavement distresses. Some of these tests are widely used whereas others tend to fall into the background for reasons such as cost, being time and labor intensive, and most …
-
Mechanical testing of synthetic biomaterials for organ simulation
… and Ecoflex 00–50, were subjected to uniaxial tensile tests according to the ASTM D412 standard. The samples were prepared using a dumbbell shape mold, and the uniaxial tensile test was performed using an Instron universal testing machine. The data obtained from the tensile test is further …
-
Estudo da fadiga de duas misturas de solo-cimento
… work deals with repeated-load for flexural test and indirect tensile test, for two differents tipes of soil-cement: lateritic soil-cement mixture and saprolitic soil-cement mixture. Fatigue curves, in terms of stress, strain and stress level, were developed for the two stabilized materials, …
-
Finite element analysis of additive manufacturing of polymers using selective laser sintering, challenges and potentials
… Utilizing AAS, the print process to create tensile test specimens was simulated and the resultant virtual parts were subjected to tensile loading in ANSYS Mechanical. The output of this simulation was then experimentally verified with physical tensile test specimens manufactured using SLS. …
-
Microstructure and Mechanical Properties of a Dual Phase Transformation Induced Plasticity Fe-Mn-Co-Cr High Entropy Alloy
… microstructural analysis, mechanical testing, and fractography were performed on the DP-HEA. The microstructural state of the alloy was analyzed by optical microscope, scanning electron microscope (SEM), energy dispersive spectroscopy, and electron backscatter diffraction (EBSD). The …
-
AN EXPERIMENTAL EVALUATION OF FABRIC STRENGTH PROPERTIES AND BEHAVIOUR OF FABRIC REINFORCED SOIL
… properties of fabric reinforcement under various test conditions, the soil-fabric interface frictional resistance and the soil-fabric composite behaviour have been investigated. Different types of tensile test are carried out on high strength woven polyester fabric (i) unconfined uniaxial tensile …
-
Effects of Heat Treatment on the Mechanical Properties of Chromium-Cobalt Alloy Wire
… certain mechanical properties of the material. A tensile test was chosen in the attempt to learn more about this alloy in the untreated form as well as the changes that can be brought about by various heat-treatments. Chromium-cobalt wires from the same batch of the size .016 X .022 inches were …
-
Characterization of tensile, creep, and fatigue properties of 3D printed Acrylonitrile Butadiene Styrene
… ABS components, including orientation-dependent tensile strength, creep, and fatigue properties. These mechanical properties are critically needed for design and application of 3D printed components. The main objective of this research is to systematically characterize key mechanical properties …
-
PLA compounds for manufacturing of fossil-free filaments for 3D printing
… using DSC, capillary viscometry, impact test and tensile test. All compounds showed transition temperatures similar to pure PLA and suitable viscosity at the shear rates used in 3D printing. With respect to the transition temperatures of the compounds and their viscosity, all the …
-
Improved methods for characterising acoustoplasticity
… long been demonstrated in uniaxial mechanical tests. The astonishing reductions in flow stress observed have been linked to changes to surface friction and to an interaction of the excitation with the mechanisms of plastic deformation in metals. Many advanced techniques and material models have …
-
A Comparison Study of Composite Laminated Plates with Holes Under Tension
… or even eliminating the need for experimental test. Error values for stress and strain were compared between Finite Element Analysis (FEA) and analytical (Classical Laminated Plate Theory), and FEA and experimental tensile test for two composite plate designs under tension: a cross-ply …
Page 1 of 31