Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 840 for “"Tensile tests"”.
-
A system for high strain rate interruptible tensile tests
… specimen was loaded repeatedly. In the MSc, a tensile SHPB (TSHB) was designed with momentum trapping to conduct interruptible tests on specimens. This configuration makes use of tandem momentum traps, allowing for the system to be fully trapped without the need for precisely preset gaps, or …
-
Experimental study and numerical modeling of length scale effects in nickel sheets - Shear, uniaxial tensile and large tensile tests at various temperatures
… scale is widely observed in the experimental tests on various materials. The Hall-Petch (HP) relation, in which the flow stress is expressed by a function of the grain size, is used to compute the effects of the mechanisms underlying such size dependent mechanical behavior. In this work, the …
-
Deformation Induced Martensitic Transformation In 304 Stainless Steels
… stress. In this work, a new method (in-situ tensile TEM) and the traditional method (ex-situ tensile tests and TEM, XRD characterization) were used to investigate the mechanisms of deformation-induced martensitic transformation in 304SS samples at different temperatures. The ex-situ tensile …
-
Tensile deformation of third generation advanced high strength sheet steels under high strain rates
… of retained austenite in the high strain rate tensile deformation behavior of third generation AHSS and to understand the effect of adiabatic heating on the austenite to martensite transformation. Four steels were selected for the study: an experimental medium Mn transformation induced …
-
The deformation of copper whiskers
… in copper whiskers grown by the above method. Tensile tests at various temperatures revealed a step effect, a hesitant flow and yield points in the flow region which were explained by proposing dislocation mechanisms. Tensile tests in dilute sulphuric acid showed that the oxide coating is not …
-
Macroscale Analysis of Strain Path Change Effects in AA3104 by Digital Image Correlation
… uniaxial tension was investigated. Plane strain tensile tests have been carried out to various pre-strains (3%, 6% and 9%), followed by uniaxial tensile tests at various orientation with respect to the tensile direction (0°, 45° and 90°). Digital image correlation (DIC) was employed to analyze …
-
CALIBRATION OF THE JOHNSON-COOK FAILURE PARAMETERS AS THE CHIP SEPARATION CRITERION IN THE MODELLING OF THE ORTHOGONAL METAL CUTTING PROCESS
… were obtained based on a set of quasi-static tensile tests, with smooth and pre-notched round bars at room temperature and elevated temperatures. The fracture parameters were validated by low- and high-strain rate simulations corresponding to tensile tests and orthogonal metal-cutting …
-
An appropriate stiffness degradation parameter to monitor fatigue damage evolution in composites
… films. Transverse cracks were introduced by tensile tests. Torsional and tensile tests were conducted to record torsional and tensile stiffness, and correlate their magnitude with damage levels. Finite Element Analysis (FEA) was employed to computationally investigate the above issue by means …
-
Comparison of monotonic and fatigue behavior of IM6 with AS4 graphite fibers reinforced resin matrix composites
… sequence [0/[plus or minus]45/90]2S. Five tensile tests were performed for each kind of fiber in order to obtain ultimate strength data from which stress amplitude data for fatigue tests could be determined. In fatigue testing the stress ratio was 0.1 and the loading frequency was 5 Hz. …
-
El Mantón de Manila. Examen morfológico, iconográfico y material, en pro de su conservación y restauración. Criterios y metodología de intervención para su consolidación
… (reflectance, FTIR) techniques and traction tensile tests in order to characterize the overall behavior of their before/after ageing processes. Tensile tests were run in weft and warp directions. Comparison of IR spectra obtained in ATR mode from different areas of the textile has evidenced …
-
In-plane deformation of kōwhaiwhai auxetic structure : a thesis presented in partial fulfilment of the requirements for the degree of Masters in Food Technology at Massey University, Palmerston North, Manawatū, Aotearoa New Zealand
… structure, with a focus on its Poisson’s ratio, tensile behaviour, and performance under varying humidity conditions to be used as a foundation for future packaging solutions involving the auxetic. The research used a combination of experimental testing, finite element modelling, and statistical …
-
Synthesis and Characterization of Poly(arylene ether sulfone)s with Novel Structures and Architectures
… by NMR, SEC, DSC, TGA, melt rheology and tensile tests. The melt viscosities of these polymers in the high frequency region were lower than the control while the stress-strain properties were comparable to those of the control, suggesting that it is possible to reduce the high shear melt …
-
Multiscale modeling of rate dependence and size effects on nanocrystalline metallic thin films
… allows us to simulate displacement-controlled tensile tests and load-controlled creep tests. The multiscale method is also adapted to simulate cases in which the separation of scales is valid in only two of the three spatial dimensions. Numerical implementations of the multiscale finite element …
-
Tensile strength and failure criterion of analog lithophysal rock
This project determines the tensile strength of lithophysal analog rock and presents failure criteria that can be used by geotechnical engineers to evaluate underground structures in rock. The physical and mechanical properties that are related to the failure criterion, such as porosity, …
Page 1 of 42