Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 46 for “"Tension-Compression Asymmetry"”.
-
Damage, Tension/Compression Asymmetry and Inferred Crack Growth in Fatigue title of Aluminum Alloys
… the apparent stiffness of the specimen in tension vs. compression. However, unlike previously described measures, it connects the tension/compression asymmetry to a general nonlinear material model. The measure is applied to a sequence of axial fatigue tests and a rapid increase in the …
-
Room and Elevated Temperature Constitutive Response of Polycrystalline Materials Exhibiting Tension-Compression Asymmetry under Monotonic Loading
… yield function is developed that captures tension/compression asymmetry and its evolution as exhibited by HCP materials such as magnesium alloy sheet. The model, referred to herein as “CPB06ex3ev”, is based upon the CPB06 [1] yield surface which is extended in this research to consider …
-
Constitutive modeling of pseudoelastic NiTi and its application to structural problems
… that is fully recoverable on unloading. Under tension, the phase transformation results in strain of nearly 7% and inhomogeneous deformation while the stress remains essentially constant. By contrast, under compression, transformation occurs at a much higher stress, the induced strain is nearly …
-
Crystal Plasticity Finite Element Models for Predicting Deformation and Twinning in Polycrystalline Magnesium Alloys
… mechanical behavior, viz. plastic anisotropy, tension-compression asymmetry and premature failure. Their origins are in the underlying heterogeneous deformation due to dislocation slip and deformation twinning on different crystallographic systems. In the polycrystalline microstructure, the …
-
An investigation of bulk nanocrystalline copper fabricated via severe plastic deformation and nanoparticle consolidation
… in controlling the resulting yield strength. Tension-compression asymmetry was observed in UFG wrought copper. This asymmetry is not always in favor of compression as reported in literature, and is also influenced by grain morphology through the interaction of dislocations with grain …
-
Phenomenological Modeling of Sheet Moulding Compound Composites Under Quasi-Static Three-Point Bending
… flexure test, found that the material exhibits tension-compression asymmetry and in-plane anisotropy. Based on the experimental results, a model, which incorporates an anisotropic and asymmetric yield function, is implemented in LS-DYNA as a user-defined material model. The model is calibrated …
-
Brittle Failure of Cellular Metamaterials
… which morphological characteristics govern tension-compression asymmetry in the fracture strength of brittle lattices and discuss a novel experimental protocol to measure their toughness.
-
Understanding Deformation Mechanisms in Architectured Nanomaterials by Predictive Modeling and Simulations
… among molecules. MD simulations of uniaxial compressions show that the highly defective np-Au has elastic compliance and early yielding, but exhibits more significant hardening than the low defective one at plastic region. Lattice defects can amalgamate, impeding the formation slipping …
-
Quantitative Assessments of Various Plastic Flow Mechanisms by In Situ Neutron Diffractions for Advanced High Entropy Alloys
… to strength and ductility and study the tension-compression asymmetry. By integrating these insights with electron microscopy and atom probe tomography, this work aims to develop a mechanistic, multiscale understanding of plasticity in complex alloys and contribute to the design of …
-
Understanding Structure-Property Linkages in Magnesium Alloys via Size-Dependent Crystal Plasticity Modeling
… strengthening, hardening, plastic anisotropy, tension-compression asymmetry and damage (i.e., their properties) . While microstructure-property linkages are better understood in more common engineering metals (e.g., aluminum), it is not well characterized for Mg alloys. This research employs a …
-
Deformation and strain concentrations in coarse-grained alpha-uranium
… development and texture changes during in-situ tension and compression. The coarse microstructure raises experimental challenges these are solved in a subsequent experiment. Deformation twinning causes a lattice reorientation that is detectable as a macroscopic texture change. A novel analysis …
-
PARAMETRICALLY HOMOGENIZED CONSTITUTIVE MODELS FOR TITANIUM ALLOYS
… CPFE analysis such as elasto-plastic anisotropy, tension-compression asymmetry, grain size, strain rate and temperature dependency etc.. A database of SERVEs with different morphology and crystallographic distributions is created and CPFE simulations are performed under a variety of loading cases. …
-
Modeling of the Thermomechanical Response of Shape Memory Alloys
… variants, minor loops, latent heat effect and tension-compression asymmetry, and ii) tailor the bulk TE tensor based on an effective description of martensite variants texture. The strengths of the proposed model lie in i) its ability to account for all the aforementioned aspects aspects of the …
-
Characterization and Modeling of Deformation, Springback, and Failure in Advanced High Strength Steels (AHSSs)
… high strength steels (AHSSs), expected with tension strength exceeding 1000 MPa, sufficient cold-stamping ductility, and low-alloyed microstructure, are being highly sought for automotive lightweighting applications without compromising on neither performance nor cost standards. From the …
-
Developing Image-Based Crystal Plasticity Models for Deformation and Crack Propagation in Polycrystalline 7000-series Aluminum Alloys
… represents elastic and plastic anisotropies, tension-compression asymmetry, and the crack surface topology in the material. The phase-field model incorporates a regularization length-scale lc that controls the sharpness of the phase-field approximation to the discrete crack. Recently, to …
-
Pseudoelasticity and Shape Memory Effect in Single Crystal Fe<sub>3</sub>Al
… Pseudoelastic behavior was seen in both tension and compression with a distinct tension-compression asymmetry. No strain hardening occurred under tension even at high applied strains as opposed to compression, where the alloy strain hardened continuously. In-situ observations on the …
-
The mechanical response of low to high density Rohacell foams
… quasistatic response of Rohacell foam displays a compression/tension asymmetry in moduli and strength. In-situ experiments revealed that different macroscopic collapse mechanisms at different foam densities drove this behaviour.</p> <p>Improved experimental methods were developed to characterise …
-
Experimental, Analytical, and Numerical Evaluation of the Mechanical Properties of the Brain Tissue
… behavior of the brain tissue that addresses the tension-compression asymmetry with taking into account the compressibility of the tissue in different loading conditions. This model is implemented by utilizing a combined analytical and numerical scheme. The results of this research could be used …
-
Experimentation and Model Development of High Temperature Shape Memory Alloy Actuation Cycling Under Tension, Compression, and Bending
… thermomechanical actuation cycling in tension and compression, thermomechanical actuation cycling under pure bending, and C-Ring bending. Since there is significant tension - compression asymmetry in SMA phase transformation, a full-field strain response is quantified for bending cases …
Page 1 of 3