Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 6 of 6 for “"Ternary eutectics"”.
-
Processing and mechanical properties of NiAl-based in-situ composites
… eutectic system, the NiAl plus Laves phase eutectics, and ternary eutectic systems containing NiAl, a refractory metal phase, and a Laves phase. Room temperature fracture toughness of these materials was determined by four-point bend test. Preliminary creep behavior was determined by …
-
Automated Image Analysis of Ternary Eutectic Microstructures
… with even three phases. Invariant ternary eutectics have greater complexity than binary eutectics, require more variables to completely describe, may change morphology due to processing conditions, and are deceptively difficult to characterize automatically. For these reasons, a …
-
Morphological modification and fracture toughness of the niobium aluminide eutectic
… of the stoichiometric NbAl<sub>3</sub> compound. Ternary additions of Ni and Ti alter the arc-melted morphology of the eutectic structure. The addition of titanium promotes a semi-lamellar structure around the periphery of the dendritic regions, but does not alter the eutectic regions of the …
-
Thermodynamic modeling of the Mg-Al-Sb system
… Al-Sb and Mg-Sb, and liquidus projections of the ternary Mg-Al-Sb. The calculated phase diagrams, the thermodynamic properties such as enthalpy, entropy, and Gibbs free energy of mixing, and activity of liquid Al-Sb and Mg-Sb alloys were found to be in good agreement with the experimental data …
-
MICROSTRUCTURE AND PROPERTIES OF BRAZED COMPOSITE COATINGS
… with iron as component phases in binary or ternary eutectics. Other phases include graphite, nickel carbide, iron carbide, chromium carbide and silicon carbide. It is found that further dissolution of silicon carbide in the matrix occurs as the brazing temperature increases, yielding …
-
Microstructural Characterization Of Ternary Eutectic And Near-Eutectic Al-Cu-Mg Alloys
… research attention in comparison with other ternary eutectic alloys. The experimental samples are directionally solidified over a range of thermal gradients (G = 3 - 25 K/mm), velocities (V = 0.625 - 6 μm/s), and compositions. Multiple characterization techniques are used to qualitatively …