Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"Test Fixtures"”.

  1. PROCESS TO DESIGN AND ANALYZE DYNAMIC ENVIRONMENT TEST FIXTURES (PDADYE)

    Vibration qualification testing is an important requirement in many industries. In-lab testing is intended to evaluate a component’s life expectancy by exposing it to a dynamic environment similar to what it may experience in its field condition. To successfully perform these tests, it is …

    mtu Repository record for PROCESS TO DESIGN AND ANALYZE DYNAMIC ENVIRONMENT TEST FIXTURES (PDADYE) (opens in a new tab)

  2. DESIGN AND DEVELOPMENT OF TEST FIXTURES FOR VALIDATING BD COR^TM GX AND MX SUBSYSTEMS

    … and validation of tooling improvements and test fixtures developed to support subsystem level reliability testing of BD diagnostic instruments. The work addresses both tooling deformation issues that impact functional performance and the need for automated, repeatable reliability testing …

    jhu Repository record for DESIGN AND DEVELOPMENT OF TEST FIXTURES FOR VALIDATING BD COR^TM GX AND MX SUBSYSTEMS (opens in a new tab) Embargoed until 2030-05-01

  3. Design and Development of Two Test Fixtures to Test the Longitudinal and Transverse Tensile Properties of Small Diameter Tubular Polymers

    … that, currently, there is no “gold standard” for testing the longitudinal and transverse tensile properties of small diameter tubular materials. While there are ASTM and ISO standards that suggest ways to test tubes in their original form, many researchers have published tensile strength data …

    calpoly Repository record for Design and Development of Two Test Fixtures to Test the Longitudinal and Transverse Tensile Properties of Small Diameter Tubular Polymers (opens in a new tab)

  4. Experimental and numerical study on the contribution of acoustic test fixtures to hearing protector sound attenuation: Sound transmission paths in the case of a double hearing protector and influence of eardrum acoustic impedance

    Acoustic test fixtures (ATFs) can be adopted to assess the sound attenuation of hearing protectors (e.g., earplugs and earmuffs) as they can facilitate measurements, and allow data acquisition under severe noise conditions. However, standardized ATFs are not realistic enough to closely capture the …

    ets-quebec Download PDF for Experimental and numerical study on the contribution of acoustic test fixtures to hearing protector sound attenuation: Sound transmission paths in the case of a double hearing protector and influence of eardrum acoustic impedance (opens in a new tab)

  5. 2X-Thru, 1X-Reflection, and Thru-Line de-embedding: Theory, sensitivity analysis, and error corrections

    … IEEE P370 committee provided the manufactured test coupons with golden standard to test the accuracy of different de-embedding methods when considering the manufacturing variations. Such manufacturing variations are propagated to the de-embedded results through the sensitivity of the test …

    must-thes Repository record for 2X-Thru, 1X-Reflection, and Thru-Line de-embedding: Theory, sensitivity analysis, and error corrections (opens in a new tab)

  6. Mitigating and leveraging dependencies between tests

    Software testing is essential for ensuring the quality of software systems, but tests do not always behave consistently. While tests are expected to run independent of one another, developers may still accidentally or purposefully introduce dependencies between them. These dependencies can cause …

    texas Repository record for Mitigating and leveraging dependencies between tests (opens in a new tab)

  7. In-service testing of temporary grounding jumper assemblies using time domain reflectometry

    … with high voltages. The current standards and test methods for protective jumper assemblies are disjointed and largely implemented in an ad hoc fashion. This thesis reviews the current state of the art and the standards and practices currently in place. Models, analyses and an investigation of …

    ku Repository record for In-service testing of temporary grounding jumper assemblies using time domain reflectometry (opens in a new tab)

  8. Cryogenic microwave engineering for the dispersive readout of spin-qubits

    … of quantum materials is developed and tested. Methods and equipment for high sensitivity microwave metrology are presented to allow for low-temperature characterization of promising silicon spin qubit samples. Microwave-compatible sample holders and test fixtures were designed, …

    colo-mines Repository record for Cryogenic microwave engineering for the dispersive readout of spin-qubits (opens in a new tab)

  9. COMMISSIONING AND TESTING OF A NEW DUSTY THERMAL VACUUM CHAMBER

    … Development Lab (PSTDL) that will be used to test the Technology Readiness Level (TRL) of extraplanetary devices and systems. With the use of vacuum pumps and simulated regolith, the DTVAC can create extraplanetary environments such as those found on the Moon and Mars. This report details the …

    mtu Repository record for COMMISSIONING AND TESTING OF A NEW DUSTY THERMAL VACUUM CHAMBER (opens in a new tab)

  10. USING TRANSFER PATH ANALYSIS AND FREQUENCY BASED SUBSTRUCTURING TO DEVELOP A ROBUST VIBRATION LABORATORY DYNAMIC TEST FIXTURE DESIGN PROCESS

    … for designing shock and vibration laboratory test fixtures that accurately reproduce the field environment for the component of interest. The methods presented in this research examine the boundary conditions presented unto the component of interest through transfer path analysis with the …

    mtu Repository record for USING TRANSFER PATH ANALYSIS AND FREQUENCY BASED SUBSTRUCTURING TO DEVELOP A ROBUST VIBRATION LABORATORY DYNAMIC TEST FIXTURE DESIGN PROCESS (opens in a new tab)

  11. Towards improvements in radiographic growth measurement of long leg bones in children

    … using a bone phantom and specially constructed test fixtures. Procedures are specified for reducing significant contributors to the overall error. In particular, the problem of radiolucency of bone cartilage is treated by combining a mammographic x-ray technique with computer processing of the …

    ubc Repository record for Towards improvements in radiographic growth measurement of long leg bones in children (opens in a new tab) Download PDF for Towards improvements in radiographic growth measurement of long leg bones in children (opens in a new tab)

  12. Preparation, characterization and testing of monomers, polymers and adhesive compositions containing blocked isocyanate functions

    … sandwiched between 1/4 inch diameter aluminum test fixtures. The test samples were immersed in distilled water for one week at 37°C before testing in the Instron tester. As an initial step, the experimental results were encouraging.</p>

    njit Repository record for Preparation, characterization and testing of monomers, polymers and adhesive compositions containing blocked isocyanate functions (opens in a new tab)

  13. The effects of high pressure and temperature environments on the properties of 6061-T651 aluminum

    "During this experimental testing program the effects of the simultaneous application of high pressure and temperature environments on the mechanical properties of 6061-T651 aluminum were analyzed. From the data obtained at the yield and ultimate points a yield and ultimate model was developed …

    must-thes Repository record for The effects of high pressure and temperature environments on the properties of 6061-T651 aluminum (opens in a new tab)

  14. Model Verification for Multi-Body Dynamics and Six Degree of Freedom Machine Impact Testing

    … for single axis impact using experimental test data from the Six DOF Machine. Due to the large number of unknowns in the physical Six DOF Machine, a parameter sensitivity study was conducted to analyze critical parameters. This study provided data regarding machine performance, improved …

    odu Repository record for Model Verification for Multi-Body Dynamics and Six Degree of Freedom Machine Impact Testing (opens in a new tab)

  15. DEVELOPMENT AND VERIFICATION OF AUTOMATED FIXTURES FOR FUNCTIONAL TESTING OF SPACE GRADE PRINTED CIRCUIT BOARD ASSEMBLIES

    … of PCBAs, comprehensive electrical functional testing at the board-level is required before higher- level assembly. Electrical functional testing provides verification of quality, workmanship, and manufacturing defects of the PCBAs. The test fixtures detailed in this report are intended for use …

    mtu Repository record for DEVELOPMENT AND VERIFICATION OF AUTOMATED FIXTURES FOR FUNCTIONAL TESTING OF SPACE GRADE PRINTED CIRCUIT BOARD ASSEMBLIES (opens in a new tab)

  16. HIGH ACCELERATIONS PRODUCED THROUGH SECONDARY IMPACT AND ITS EFFECT ON RELIABILITY OF PRINTED WIRING ASSEMBLIES

    … on reliability of printed wiring assemblies. The test equipment consists of a commercially available drop system and a commercially available attachment termed a Dual Mass Shock Amplifier (DMSA), which extends the impact acceleration range to as much as 30,000 Gs by utilizing secondary impact …

    maryland Repository record for HIGH ACCELERATIONS PRODUCED THROUGH SECONDARY IMPACT AND ITS EFFECT ON RELIABILITY OF PRINTED WIRING ASSEMBLIES (opens in a new tab)

  17. Failure strength and mechanism of composite laminates under multiaxial loading conditions

    … types of biaxial specimens and associated test fixtures were developed and employed in the study. Standard IITRI specimens were used to determine tensile and compressive failure strengths of G-10 composite laminates in both fill and warp directions. Biaxial tension-compression (BTC) and …

    uiuc Repository record for Failure strength and mechanism of composite laminates under multiaxial loading conditions (opens in a new tab)

  18. Dynamic system characterization and design using mechanical impedance representations

    Vibration testing is a critical aspect in the qualification of fieldable hardware as dynamic environments are typically design drivers. However, it is difficult to provide representative boundary conditions for component testing and the presence of an ill-matched boundary condition can alter the …

    bu Repository record for Dynamic system characterization and design using mechanical impedance representations (opens in a new tab)

  19. Nonlinearities and chaos response in modern RF devices

    … of a chaotic and continuous excitation. Previous tests have concluded that the response of these devices exhibit nonlinear effects when given continuous multiple input frequency stimuli; therefore, the experiments presented within takes these tests a step further by testing the scenarios …

    missouri Repository record for Nonlinearities and chaos response in modern RF devices (opens in a new tab)

  20. A Study of RF/Microwave Components Using Fused Deposition Modeling and Micro-Dispensing

    … (PA) is performed. Two 5 mil 100% in-fill ABS PA test fixtures are fabricated with a varying number of vias. The designs are biased at various operating points to collect thermal and RF data. The PA operates at 151°C before melting the ABS substrate. A thermal model is developed from the …

    usf Repository record for A Study of RF/Microwave Components Using Fused Deposition Modeling and Micro-Dispensing (opens in a new tab)

Page 1 of 2