Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 70 for “"Test object"”.
-
Improving the test object process for pre-series in China Concerning delivery precision and lead-time
… preceded the launch, in the form of so called test objects. Test object are used to; test and verify that parts and production process are of the right quality and according to a set specification. Since 2010, Volvo Car Group has expanded their business in the Chinese market and opened new …
-
Utveckling av mätsystem för termisk studie av transformator
… the temperature in several positions over the test object. This report describes the construction, calibration and evaluation of such a system. The system has eight channels where each channel is made up by of resistance thermometers, wheatstone bridges with amplification and separate data …
-
Development of an electrical impedance tomograph for complex impedance imaging
… of a novel circuit. In order to aid system testing, a surface mount technology resistor-mesh test object was produced. This has been adopted by the EEC Concerted Action on Impedance Tomography (CAIT) programme as the first standard test object. A computer model of the phantom was produced …
-
Design and analysis of an inertial properties measurement device for manual wheelchairs
… natural frequency of the system. In this thesis, test results are presented for the calibration of the load cells and spring rate. In addition, objects with known mass properties were tested and comparisons are made between the analytical and empirical inertia results. In general, the mass …
-
Fluid flow diagnostics using rainbow schlieren imaging and computer tomography.
… used to reconstruct the original two-dimensional test object. Several tomographic reconstruction techniques are available. The theory of the convolution backprojection algorithm used in this work is presented.
-
Interpolated ESPI using continuous measurements for moving surfaces and large deformations
… measurement is a common experimental need when testing the behaviour of mechanical devices. Such measurements are the basis for the evaluation of mechanical and thermal stresses, also for health monitoring of biological samples, study of vibrating parts of a mechanical component, and for quality …
-
Simulation of Gust Generator-Induced Wind Tunnel Flow Fields
… out of the flow characteristics of wind tunnel test section flow influenced by a gust generation system. The University of Washington's 3'x3' Low-Speed wind tunnel was modeled using high-fidelity Computational Fluid Dynamics (CFD) simulations and using easy-to-program and inexpensive-to-run …
-
A survey and comparison of various models of gravitational dynamical friction
Under certain circumstances, a massive object travelling through a medium may experience a net average deceleration due to the gravitational interaction between it and the medium. This slowing down effect is called dynamical friction. There are a variety of ways in which dynamical friction may be …
-
Acoustic pulse reflectometry for the measurement of musical wind instruments
… measure the input impulse response of a tubular object, such as a wind instrument, from which both its bore profile and input impedance can be calculated. In this thesis, after a discussion of the theory of acoustic pulse reflectometry, the operation of a practical reflectometer is described and …
-
Reliability analysis of power electronics for heavy hybrid vehicle applications
… module both the IGBTs and the diodes are tested. The report focuses on active power cycling. Passive cycling is when the test object is thermally cycled from the surrounding temperature and active power cycling is when the test object is heated up by a current, during cool down the current …
-
Quantitative assessment of image quality in digital breast tomosynthesis
… are three types of reconstructed objects that appear in tomosynthesis, tomographic planes (or slices), slabs and 2D synthetic images. Tomographic slices are a set of images depicting the content of breast at various depths. The images produced in DBT are planes parallel to the …
-
Vehicle Simulation for Powertrain System Testing
… To meet the emission regulations, powertrain testing has become more important right from the development process of a vehicle. The Hardware-in-Loop is one of the powertrain testing approach which allows testing to be conducted on a test object. The test object can be an engine or any …
-
Keeping visual-auditory associations in mind: The impact of detail and meaningfulness on crossmodal working memory load
Complex objects have been found to take up more visual working memory---as measured by lowered change-detection accuracy with such stimuli---than simple colored shapes (Treisman, 2006; Xu, 2002). While verbal working memory studies have similarly shown reduced apparent capacity for longer words …
-
View Synthesis from Image and Video for Object Recognition Applications
Object recognition is one of the most important and successful applications in computer vision community. The varying appearances of the test object due to different poses or illumination conditions can make the object recognition problem very challenging. Using view synthesis techniques to …
-
Next-Best-View Planning for Object-Centred 3D Gaussian Splatting
… (NBV)-guided image acquisition strategy for object-centred 3DGS reconstruction. The aim is to determine whether the NBV strategy improves reconstruction quality, density, and visual completeness for object-centred 3DGS compared to a predefined image acquisition strategy. A quadrotor-based …
-
Object Permanence in the Raccoon (Procyon Lotor)
Two studies are conducted to test object permanence in infant and adult raccoons. The raccoon (Procyon lotor) is an omnivorous generalist known for its primate-like intelligence, but has never been given object permanence testing. In Study 1, infant raccoons (kits) of 12 and 16 weeks failed single …
-
DEVELOPMENT AND EVALUATION OF MUON SCATTERING TOMOGRAPHY RECONSTRUCTION TECHNIQUES FOR SPENT FUEL VERIFICATION
… filled dry cask container and steel drum test object. Two three-dimensional reconstruction techniques, a backprojection and newly developed combined depth of field algorithm, are evaluated. The combined depth of field approach exhibited higher contrast between lead and surrounding low …
-
Design and Implementation of One and Two-Degree-of-Freedom Magnetic Suspension and Balance Systems
The main objectives of this research were to design and implement one and two-degree-of-freedom (1 DOF and 2-DOF) magnetic levitation systems to levitate permanent magnet cores contained in PVC pipes, 8.4 cm and 76.2 cm in length, respectively. This project used the components of a Magnetic …
-
Quality control of medical film digitizers
… control protocol is presented, based on a set of test objects adaptive to the specifications of various digitizers. The protocol includes parameters such as uniformity, input-output response, noise, geometric distortion, spatial resolution, low contrast discrimination, film slippage and light …
Page 1 of 4