Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Testing--Mathematical models"”.
-
MULTIPLE-WAVELENGTH PHASE SHIFTING INTERFEROMETRY (OPTICAL-TESTING, ASPHERIC SURFACE).
… the MWLPSI a more practical technique for the testing of steep aspheric surfaces.
-
Influence of lumber property correlations on roof truss reliability
… property correlations are summarized. Computer models were constructed to simulate the behavior of five common roof truss patterns. The patterns studied were the Fink, double W, triple W, triple W farm, and flat Howe trusses. Monte Carlo simulation, based on 50,000 trials, was used to calculate …
-
An engineering approach to modelling ballistic impact on hybrid polymer laminates
… to work within the limitations of the material models and the failure algorithms available within LS-DYNA, and still try to reproduce the behaviour observed experimentally by previous researchers, initially on monolithic plates of polycarbonate and PMMA and then on hybrid laminates. The first …
-
A computer model for a fixed-trim re-entry vehicle using the Gracey guidance law with evasive capabilities
Advances in strategic missile systems are needed to provide a capability to attack targets that are hardened and, perhaps defended. In this study a point-mass simulation employing an advanced guidance law is examined for its accuracy and evasive capabilities. A nonlinear programming (NLP} …
-
On the compressive response of open-cell aluminum foams
… desification were successfully reproduced using models with larger, finite size domains involving several characteristic cells. Results indicate that accurate representation of the ligament bending rigidity and the base material inelastic properties are essential whereas the randomness of the …
-
Factorial design for a sequential allocation study
Robert J. Taylor and Herbert A. David developed a new experimental approach in the screening of prospective drugs to be used in the treatment of cancer. The procedure is a sequential one, where the allocation of patients to drugs is based upon the performance of the drugs in immediately previous …
-
Reliability analysis of single-headed anchor bolts
Several design equations for predicting the capacity of a single-headed anchor bolt embedded in plain concrete have been recommended in the United States. The capacities computed by these different recommendations, in some cases, differ significantly. The existing differences in current design …
-
Evaluation of pavement management data and analysis of treatment effectiveness using multi-level treatment transition matrices
… types were modeled with the appropriate mathematical functions and used to; 1) assess the pavement conditions and rates of deterioration before and after the treatment and the treatment benefits; 2) develop methodologies for estimating the pavement conditions and distresses of the passing …
-
Nonlinear dynamic response of rectangular glass plates subject to fluctuating wind loads
… to a fluctuating wind pressure. Here, a mathematical model is developed to determine this dynamic behavior. Also, it is well known that the strength of a glass plate is related to the magnitude and duration of the nominal tensile stress due to cyclic or randomly distributed loads such as …
-
Comparison of energy minimization with direct stiffness for linear structural analysis
This study compares energy minimization with direct stiffness for linear structural analysis. The energy minimization approach locates the generalized displacement vector by minimizing the total potential energy of the structure being analyzed. From the survey of variable metric and conjugate …
-
Applications of the wavefield transform to nondestructive evalution
Thesis (Ph. D.)--Michigan State University. Department of Electrical and Computer Engineering, 2005
-
Seismic capacity evaluation of a reinforced concrete bridge via a calibrated finite element method
Includes bibliographical references (pages 69-73).
-
A computational procedure for simulation of torpedo anchor installation, set-up and pull-out
Torpedo-shaped anchors serve as foundations for risers and floating structures in the deep-water marine environment. Such cone-tipped, cylindrical steel pipes, ballasted with concrete and scrap metal, penetrate the seabed by the kinetic energy they acquire during free fall. Estimation of the …
-
Backcalculation of pavement layer properties from deflection data
Thesis (Ph.D.)--Michigan State University. Department of Civil and Environmental Engineering, 1993
-
Analysis of the pressuremeter test by FEM formulation of the elasto-plastic consolidation
… for the soil model, a comprehensive laboratory testing effort was needed. The validity of the numerical model and the soil parameters is established by comparing it to SBPM tests performed in the field. The numerical model uses the finite element method in a special code capable of handling …
-
Analytical and numerical study of phase transformation within a bar composed of a strain-softening nonlinear elastic material
Thesis (Ph. D.)--Michigan State University. Department of Materials Science and Mechanics, 1993
-
Fabrication, characterisation and modelling of corrugated wire mesh laminates
… of the corrugations and friction. Experimental testing is conducted on several samples of single layer, two layer, and four layer wire mesh laminates under transverse compression and separately under shear loading. The test results show considerable scatter probably due to variations in the …
Page 1 of 3