Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 66 for “"Testing-machines"”.

  1. Development of creep testing machines for spheroidal graphite cast iron

    … graphite cast iron. The development of two creep testing machine suitable for this material was undertaken. Due to the size of the test piece specified, the elongation of the material and the speek of test several modifications had to be made to these machines before a satisfactory procedure could …

    nps Repository record for Development of creep testing machines for spheroidal graphite cast iron (opens in a new tab)

  2. Identification of dynamic properties of materials for the spent nuclear fuel package at elevated temperatures

    … for the nuclear fuel package and the appropriate testing systems were identified [15]. Second, fixtures for tensile testing at elevated temperatures using two machines, namely MTS and Instron Dynatup testing machines were designed and manufactured to make them compatible with the room temperature …

    unlv Repository record for Identification of dynamic properties of materials for the spent nuclear fuel package at elevated temperatures (opens in a new tab) Download PDF for Identification of dynamic properties of materials for the spent nuclear fuel package at elevated temperatures (opens in a new tab)

  3. A study of fatigue stresses in marine propellor shafting

    … assembly" as affected by the keyway. Two fatigue testing machines were built and used: one tested a keyed assembly in reversed bending, and the other tested a keyed assembly in reversed torsion or a combination of reversed bending and reversed torsion. Both sled-runner and round-ended keyways were …

    ubc Repository record for A study of fatigue stresses in marine propellor shafting (opens in a new tab) Download PDF for A study of fatigue stresses in marine propellor shafting (opens in a new tab)

  4. Development of Control Strategies and Testing Procedures for Suspension Seats Used in High Speed Craft

    … this work was to develop control strategies and testing procedures for the Slam Impact Seat Test Rig (SISTR). The SISTR was developed to more ac- curately test suspension seats for use in high speed craft (HSC). In general, HSC are defined as vessels which can achieve speeds higher than 30 knots, …

    carleton Repository record for Development of Control Strategies and Testing Procedures for Suspension Seats Used in High Speed Craft (opens in a new tab)

  5. Implementation of a testing and initialization algorithm for the generalized tree structure

    … structure of a generalized tree using, as the testing machines, a set of generalized sequential trees. It is shown that the testing machine can be implemented on a set of trees of the same depth as that of the tree which is being tested. Modifications are made to the generalized tree structure …

    vt Repository record for Implementation of a testing and initialization algorithm for the generalized tree structure (opens in a new tab)

  6. Optimization of composite tubes for a thermal optical lens housing design

    … the manufacturing, structural analysis and testing of a composite cylinder for space application. This work includes the design and fabrication of a reusable multicomponent mandrel made of aluminum and steel and the manufacturing of a carbon fiber reinforced tube in an epoxy resin matrix. …

    tamu Repository record for Optimization of composite tubes for a thermal optical lens housing design (opens in a new tab)

  7. Flexure modulus of elasticity in living branch wood

    … kept at ambient room temperature or 21.1 C. Two testing machines were used to measure MOE and subsequently compared to one another. In general, the data obtained from the Fakopp meter calculated MOE higher than the data from the universal test machine (UTM), but had a smaller standard error. The …

    wvu Repository record for Flexure modulus of elasticity in living branch wood (opens in a new tab)

  8. Identification of dynamic properties of materials for the nuclear waste package

    … impact loading was not well documented. Second, testing equipment is selected to match the appropriate specimen type. Two machines are used for the experimental part of the project: MTS Axial/Torsion Material testing system and Instron Dynatup impact test machine. Third, fixtures for tensile …

    unlv Repository record for Identification of dynamic properties of materials for the nuclear waste package (opens in a new tab) Download PDF for Identification of dynamic properties of materials for the nuclear waste package (opens in a new tab)

  9. Deformation and fracture of concrete under uniaxial impact loading

    … similar to those obtained by servo-controlled testing machines at lower strain rates"--Abstract, page ii.

    must-thes Repository record for Deformation and fracture of concrete under uniaxial impact loading (opens in a new tab)

  10. Design of a Cyclic Sliding, Dynamically Loaded Wear Testing Device for the Evaluation of Total Knee Replacement Materials

    … to seven times body weight. However, most wear testing machines that have been used to evaluate total knee replacement materials are unidirectional and/or apply only static force. This thesis presents an alternate wear testing device capable of simulating the most prevalent motions of the knee, …

    vt Repository record for Design of a Cyclic Sliding, Dynamically Loaded Wear Testing Device for the Evaluation of Total Knee Replacement Materials (opens in a new tab)

  11. INTELLIGENT APPOINTMENT SCHEDULING TO REDUCE TURNAROUND TIME (TAT)

    … (doctors and nurses) and physical resources (testing machines). An optimal appointment scheduling system can effectively balance doctor idling and doctor tardiness with respect to the patient waiting time. In this thesis, we proposed a series of appointment strategies based on patient …

    nus Repository record for INTELLIGENT APPOINTMENT SCHEDULING TO REDUCE TURNAROUND TIME (TAT) (opens in a new tab) Download file for INTELLIGENT APPOINTMENT SCHEDULING TO REDUCE TURNAROUND TIME (TAT) (opens in a new tab)

  12. Dynamic characteristics of metals under elevated temperatures

    … metals were introduced; Second of all, the two testing systems, namely MTS and Instron Dynatup 8250 testing machines, were identified; finally, evaluation of the candidate metals testing results and verification of these testing results using finite element analysis is performed. Results showed …

    unlv Repository record for Dynamic characteristics of metals under elevated temperatures (opens in a new tab) Download PDF for Dynamic characteristics of metals under elevated temperatures (opens in a new tab)

  13. Numerical-Experimental Assessment of Stress Intensity Factors in Ultrasonic Very-High-Cycle Fatigue

    … materials. In order to significantly reduce testing time, ultrasonic testing machines are widely adopted when carrying out VHCF tests. In the VHCF literature, the critical Stress Intensity Factor (SIF) is estimated by applying analytical SIF formulations to the typical semi-circular surface …

    poli-torino Repository record for Numerical-Experimental Assessment of Stress Intensity Factors in Ultrasonic Very-High-Cycle Fatigue (opens in a new tab)

  14. Some factors influencing the low cycle fatigue behaviour of pre-cracked, high strength structural steels in sea water

    … meaningful tests it is necessary to employ low testing frequencies which reflect the sensitivity of the material to the conjoint effects of fatigue and corrosiono This creates a requirement for a large number of testing machines. The need was met by the design and construction of multi-specimen …

    soton Download PDF for Some factors influencing the low cycle fatigue behaviour of pre-cracked, high strength structural steels in sea water (opens in a new tab)

  15. CHALLENGES FOR EARLY INFANT DIAGNOSIS OF HIV IN THE GBEKE HEALTH REGION, IN CENTRAL COTE D'IVOIRE

    … facilities, and a decentralization of virologic testing machines to reduce the turnaround time of test results for HIV exposed infants.

    washington Repository record for CHALLENGES FOR EARLY INFANT DIAGNOSIS OF HIV IN THE GBEKE HEALTH REGION, IN CENTRAL COTE D'IVOIRE (opens in a new tab)

  16. Analytical modeling of metallic honeycomb for energy absorption and validation with FEA

    … of it must be made using high-impact testing machines, which are expensive and time-consuming. Therefore, development of an analytical model that can predict energy absorption at higher velocities is needed. Also, strain-rate coefficients must be determined for each particular type of …

    wichita-thes Repository record for Analytical modeling of metallic honeycomb for energy absorption and validation with FEA (opens in a new tab)

  17. Improving Healthcare Resource Allocation within a Geographic Area through Optimization and Machine Learning

    … healthcare settings, including point-of-care testing allocation in western Kenya and mental health prevalence estimation in Washington state. The primary contributions include practical optimization models for real-world healthcare resource allocation and innovative data fusion approaches for …

    washington Repository record for Improving Healthcare Resource Allocation within a Geographic Area through Optimization and Machine Learning (opens in a new tab)

  18. Design, Development, and Testing of a Miniature Fixture for Uniaxial Compression of Ceramics Coupled with In-Situ Raman Spectrometer

    … in the configured state using MTS universal testing machines. To ensure residual stresses from mounting the load cell did not invalidate the original calibration, the in-situ compression stage was tested once attached to the Renishaw Raman spectrometer using LaCoO3 ceramic samples. The Raman …

    ucf Repository record for Design, Development, and Testing of a Miniature Fixture for Uniaxial Compression of Ceramics Coupled with In-Situ Raman Spectrometer (opens in a new tab)

  19. Mechanical Properties of 3D Printed Acrylonitrile Styrene Acrylate

    … and 90⁰. To perform the tests, MTS Universal Testing Machines were used along with Digital Image Correlation (DIC) to measure strain. DIC was incorporated to replace the use of strain gauge in the sample to find poisons ratio of the material. The results showed that raster orientation affects …

    sdstate Repository record for Mechanical Properties of 3D Printed Acrylonitrile Styrene Acrylate (opens in a new tab)

  20. The identification of the effect of high rate deformation on the microstructure and properties of titanium alloys

    … are between 1s-1 and 150 s-1. Conventional testing machines are unable to reach these strain rates and provide accurate information which the manufacturing community is currently interested. This project focused on the process optimization of a high strain rate forging simulator which is …

    strathclyde Repository record for The identification of the effect of high rate deformation on the microstructure and properties of titanium alloys (opens in a new tab)

Page 1 of 4