Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Texture Measurement"”.

  1. Three-dimensional pavement surface texture measurement and statistical analysis

    Pavement texture has been measured predominantly by using two-dimensional (2D) profile methods. The 2D profile based mean profile depth (MPD) is still the well accepted texture index which has been found inadequate to characterize pavement texture especially when tire/pavement friction and noise …

    manitoba Repository record for Three-dimensional pavement surface texture measurement and statistical analysis (opens in a new tab)

  2. Task-specific uncertainty of areal surface texture measurement using structured illumination microscopy

    … of the measuring technique, areal surface measurement has been widely applied in the industry. However, estimating the uncertainty of areal surface measurement is still a challenge. Except for the metrological characteristics of the measurement system, measurement conditions should be …

    qucosa-diss

  3. AN EXPERIMENTAL STUDY ON SURFACE TEXTURE MEASUREMENT USING LIGHT SCATTERING, FRACTAL & FOURIER METHODS

    … view of the various optical techniques for the measurement of surface roughness has been given. Parametric and non -parametric methods are discussed with suitable examples. Among the parametric methods, scattering, speck.le and polarization methods have been discussed in detail. In chapter 2, …

    nus Repository record for AN EXPERIMENTAL STUDY ON SURFACE TEXTURE MEASUREMENT USING LIGHT SCATTERING, FRACTAL & FOURIER METHODS (opens in a new tab) Download file for AN EXPERIMENTAL STUDY ON SURFACE TEXTURE MEASUREMENT USING LIGHT SCATTERING, FRACTAL & FOURIER METHODS (opens in a new tab)

  4. The role of 3D surface texture measurement of natural human enamel for assessment of erosive tooth wear

    … investigated the role of 3D surface roughness measurement for the quantification of erosive tooth wear. The aim of this thesis was to develop a method for quantifying 3D surface roughness changes occurring in natural unpolished enamel and polished enamel during erosion. Firstly, an in vitro …

    kings Repository record for The role of 3D surface texture measurement of natural human enamel for assessment of erosive tooth wear (opens in a new tab) Download PDF for The role of 3D surface texture measurement of natural human enamel for assessment of erosive tooth wear (opens in a new tab)

  5. Preserving Texture Boundaries for SAR Sea Ice Segmentation

    Texture analysis has been used extensively in the computer-assisted interpretation of SAR sea ice imagery. Provision of maps which distinguish relevant ice types is significant for monitoring global warming and ship navigation. Due to the abundance of SAR imagery available, there exists a need to …

    waterloo Repository record for Preserving Texture Boundaries for SAR Sea Ice Segmentation (opens in a new tab)

  6. Texture determination from ultrasound for HCP and cubic materials

    <p>Crystallographic texture in polycrystalline HCP and cubic materials, often developed during thermomechanical deformations, has profound effects on properties at the macroscopic or component level. Given the respective natures of current detection techniques, a non-destructive, three-dimensional …

    oxford Repository record for Texture determination from ultrasound for HCP and cubic materials (opens in a new tab)

  7. Optical method and neural network for surface roughness measurement and surface pattern classification

    … It is found that, the resolution of the surface texture measurement improved considerably in the case of presently employed optical method. The neural network developed for this purpose could classify the resulting surface patterns successfully. Newly introduced selfpruning method results in an …

    dcu Download PDF for Optical method and neural network for surface roughness measurement and surface pattern classification (opens in a new tab)

  8. EFFECT OF DIFFERENT OXYGEN BARRIER POUCHES ON THE QUALITY OF RETORTED CARROTS

    … Instrumental analysis of color (L*, a*, b*) and texture (firmness) was performed on TP baby carrots in the different oxygen barrier pouches. OTR of pouches were measured pre-, post- processing, and at week 14. Sensorial analysis was performed with frequent panelists. The results were correlated …

    clemson Repository record for EFFECT OF DIFFERENT OXYGEN BARRIER POUCHES ON THE QUALITY OF RETORTED CARROTS (opens in a new tab)

  9. Mitigation of Climate Change Impacts on Runway Friction Kuujjuaq Airport

    … into the future. In this research, runway texture and friction are assessed on Runway 07-25, as increased winter maintenance activities resulting from climate change are thought to be reducing surface friction. Existing friction and texture measurement data from previous years, current …

    waterloo Repository record for Mitigation of Climate Change Impacts on Runway Friction Kuujjuaq Airport (opens in a new tab)

  10. Chip Seals for Asphalt Concrete Pavements: A Proposed Emulsion Residue Specification and Existing Pavement Texture Evaluation

    … from chip seal emulsions; and investigation of texture measurement methods for assessing existing pavement macrotexture before a chip seal is placed. The performance graded (PG) asphalt binder specification, which was developed to characterize asphalt binder properties related to the performance …

    tamu Repository record for Chip Seals for Asphalt Concrete Pavements: A Proposed Emulsion Residue Specification and Existing Pavement Texture Evaluation (opens in a new tab)

  11. Comparison of Macrotexture Measuring Devices Used in Virginia

    This thesis compared macrotexture measurements obtained using the volumetric method (Sand Patch) and three laser-based devices: MGPS system, ICC laser profiler, and Circular Texture Meter (CTMeter). The study used data from three sources: two controlled experiments conducted at the Virginia Smart …

    vt Repository record for Comparison of Macrotexture Measuring Devices Used in Virginia (opens in a new tab)

  12. Development of durable antibacterial stainless steel surfaces through plasma nitriding and ultrashort pulsed laser texturing

    … this study have shown that it is possible to texture S phase treated surfaces using femtosecond (fs) pulsed laser texturing with no discernible decomposition or detrimental consequences to the layer structure, hardness or corrosion resistance of the S phase. Given these new findings, and the …

    birmingham Download PDF for Development of durable antibacterial stainless steel surfaces through plasma nitriding and ultrashort pulsed laser texturing (opens in a new tab)

  13. Role of Loading Direction on Fatigue Behavior of Smooth and Notched ZK60 Extrusion

    … strength for this direction. Moreover, the texture measurement indicated a sharp basal texture justifying asymmetric behavior solely along the ED direction. Higher tensile mean stress and less dissipated plastic energy per cycle for the ED samples, acting as two competing factors, were the …

    waterloo Repository record for Role of Loading Direction on Fatigue Behavior of Smooth and Notched ZK60 Extrusion (opens in a new tab)

  14. A Computer Vision-based Method for Tack Coat Coverage Inspection Using Drone-Collected Images

    … region of interest is processed to extract the texture features using gray-level co-occurrence (GLCM). Finally, the texture feature information is leveraged to grade the tack coat uniformity level with the use of LightGBM. Experiments were conducted to examine the performance of the proposed …

    wvu Repository record for A Computer Vision-based Method for Tack Coat Coverage Inspection Using Drone-Collected Images (opens in a new tab)

  15. Hodnocení čelního těsnícího provedení povrchu pomocí charakteristik textury povrchu

    Diplomová práce zabývající se hodnocením čelního těsnícího provedení povrchu popisuje a porovnává povrchovou topografii s cílem analyzovat nejvýznamnější charakteristické parametry ovlivňující rozhodujícím způsobem těsnost a funkční spolehlivost. Jako nejvhodnější parametry predikce těsnosti byly …

    brno-tech Repository record for Hodnocení čelního těsnícího provedení povrchu pomocí charakteristik textury povrchu (opens in a new tab)

  16. Macrotexture Assessment of Florida Pavements

    … vehicle and lead to hydroplaning. Pavement macrotexture provides the pathways for water to drain, which allows for the necessary grip between tire and pavement. Macrotexture, which is quantified by the Florida Department of Transportation (FDOT) in terms of mean profile depth (MPD), is analyzed …

    unf Repository record for Macrotexture Assessment of Florida Pavements (opens in a new tab) Download PDF for Macrotexture Assessment of Florida Pavements (opens in a new tab)

  17. Effects of ascorbic acid applied by two hydrocooling methods on physical, chemical and sensory attributes of green leaf lettuce stored at 5 °C

    … instrumental color (L*, a* and b* values), texture measurement using TA-XT 2 Texture analyzer, relative water content and a consumer sensory evaluation. All analytical assays were completed at 5 time intervals: before treatment application, and after 1,7, 14 and 21 days of storage at 5 °C. …

    colostate Repository record for Effects of ascorbic acid applied by two hydrocooling methods on physical, chemical and sensory attributes of green leaf lettuce stored at 5 °C (opens in a new tab)

  18. Characterization and Modeling of Forged ZK60 Mg Alloys under Quasi-static and Fatigue Loadings

    … recrystallized microstructure with sharp basal texture was developed in the material. Also, the porosity volume was dramatically reduced after the forging. As a result, the tensile yield strength and elongation were increased by 21% and 72%, respectively. Under cyclic loadings, the forged …

    waterloo Repository record for Characterization and Modeling of Forged ZK60 Mg Alloys under Quasi-static and Fatigue Loadings (opens in a new tab)

  19. Přesnost strojírenských výrobků

    Bakalářská práce se zabývá problematikou přesnosti strojírenských výrobků v zakázkové výrobě s důrazem na parametry textury povrchu. Ve spolupráci s firmou byla bakalářská práce řešena na konkrétní modelové zakázce děrovací matrice. Bakalářská práce dále porovnává měření, vyhodnocení a posouzení …

    brno-tech Repository record for Přesnost strojírenských výrobků (opens in a new tab)

Page 1 of 2